OpenVMS Debugger Manual

Index

• Abort function #1
• Abort function #2
• Abort function #3
• Abort function #4
• Abort function #5
• Abort function #6
• /ABORT qualifier
• ACTIVATE BREAK command #1
• ACTIVATE BREAK command #2
• ACTIVATE TRACE command #1
• ACTIVATE TRACE command #2
• ACTIVATE WATCH command #1
• ACTIVATE WATCH command #2
• /ACTIVATING qualifier #1
• /ACTIVATING qualifier #2
• /ACTIVATING qualifier #3
• /ACTIVATING qualifier #4
• /ACTIVATING qualifier #5
• /ACTIVATING qualifier #6
• /ACTIVATING qualifier #7
• /ACTIVATING qualifier #8
• /ACTIVATING qualifier #9
• Activation
  • breakpoint #1
  • breakpoint #2
  • breakpoint #3
  • tracepoint #1
  • tracepoint #2
  • tracepoint #3
  • watchpoint #1
  • watchpoint #2
• /ACTIVE qualifier #1
• /ACTIVE qualifier #2
• /ACTIVE qualifier #3
• %ACTIVE_TASK built-in symbol #1
• %ACTIVE_TASK built-in symbol #2
• %ADAEXC_NAME built-in symbol #1
• %ADAEXC_NAME built-in symbol #2
• %ADDR built-in symbol
• Address expressions
  • code #1
  • code #2
  • code #3
  • compared to language expressions
  • composite
    • vector
  • current entity #1
  • current entity #2
  • current entity #3
  • DEPOSIT command #1
  • DEPOSIT command #2
  • EVALUATE/ADDRESS command #1
  • EVALUATE/ADDRESS command #2
  • EVALUATE/ADDRESS command #3
  • EXAMINE command #1
  • EXAMINE command #2
  • EXAMINE/SOURCE command
  • logical predecessor #1
  • logical predecessor #2
  • logical predecessor #3
  • logical successor #1
  • logical successor #2
  • logical successor #3
  • See also Addresses
  • SET BREAK command #1
  • SET BREAK command #2
  • SET TRACE command #1
  • SET TRACE command #2
  • SET WATCH command #1
  • SET WATCH command #2
  • symbolic
  • SYMBOLIZE command #1
  • SYMBOLIZE command #2
  • type of
• /ADDRESS qualifier #1
• /ADDRESS qualifier #2
• /ADDRESS qualifier #3
• /ADDRESS qualifier #4
• Addresses
  • depositing into
  • examining
  • obtaining #1
  • obtaining #2
  • specifying breakpoint on
  • symbolizing
• /AFTER qualifier #1
• /AFTER qualifier #2
• /AFTER qualifier #3
• Aggregates
  • changing value of #1
  • changing value of #2
  • DEPOSIT command #1
  • DEPOSIT command #2
  • DEPOSIT command #3
  • DEPOSIT command #4
  • DEPOSIT command #5
  • DEPOSIT command #6
  • displaying value of #1
  • displaying value of #2
  • EXAMINE command #1
  • EXAMINE command #2
  • EXAMINE command #3
  • EXAMINE command #4
  • EXAMINE command #5
  • EXAMINE command #6
  • monitoring
  • SET WATCH command #1
  • SET WATCH command #2
  • SET WATCH command #3
• /ALL qualifier
  • ACTIVATE BREAK command
  • ACTIVATE TRACE command
  • ACTIVATE WATCH command
  • CANCEL BREAK command
  • CANCEL DISPLAY command
  • CANCEL IMAGE command
  • CANCEL MODULE command
  • CANCEL TRACE command
  • CANCEL WATCH command
  • CANCEL WINDOW command
  • DEACTIVATE BREAK command
  • DEACTIVATE TRACE command
  • DEACTIVATE WATCH command
  • DELETE command
  • DELETE/KEY command
  • EXTRACT command
  • SEARCH command
  • SET IMAGE command
  • SET MODULE command
  • SET PROCESS command
  • SET TASK command
  • SHOW DISPLAY command
  • SHOW KEY command
  • SHOW PROCESS command
  • SHOW TASK command
  • SHOW WINDOW command
• ALLOCATE command
  • debugging with two terminals
• %AP built-in symbol #1
• %AP built-in symbol #2
• /APPEND qualifier
• Arguments
  • program #1
  • program #2
  • program #3
• /ARGUMENTS qualifier #1
• /ARGUMENTS qualifier #2
• /ARGUMENTS qualifier #3
• Arrays
  • types of #1
  • types of #2
  • types of #3
    • vector register
• Arrays types of
• /ASCIC qualifier #1
• /ASCIC qualifier #2
• /ASCIC qualifier #3
• /ASCID qualifier #1
• /ASCID qualifier #2
• /ASCID qualifier #3
• ASCII (American Standard Code for Information Interchange)
  • string type
• ASCII character set
  • string types #1
  • string types #2
• /ASCII qualifier #1
• /ASCII qualifier #2
• /ASCII qualifier #3
• ASCII string type #1
• ASCII string type #2
• ASCII string types #1
• ASCII string types #2
• /ASCIW qualifier #1
• /ASCIW qualifier #2
• /ASCIW qualifier #3
• /ASCIZ qualifier #1
• /ASCIZ qualifier #2
• /ASCIZ qualifier #3
• AST-driven programs
  • debugging
• /AST qualifier #1
• /AST qualifier #2
• Asterisk (*)
  • multiplication operator
• ASTs (asynchronous system traps)
  • and static watchpoints
  • CALL command #1
  • CALL command #2
  • Ctrl/C service routine
  • disabling
  • displaying AST handling conditions
  • enabling
• At sign (@)
  • contents-of operator
  • execute-procedure command #1
  • execute-procedure command #2
  • SET ATSIGN command
  • SHOW ATSIGN command
• ATTACH command #1
• ATTACH command #2
• Attributes
  • display #1
  • display #2
  • display #3
  • display #4
  • display #5
  • display #6

• Backslash (\)
  • current value
  • global-symbol specifier #1
  • global-symbol specifier #2
  • global-symbol specifier #3
  • path name delimiter #1
  • path name delimiter #2
  • path name delimiter #3
• %BIN built-in symbol #1
• %BIN built-in symbol #2
• /BINARY
• /BINARY qualifier #1
• /BINARY qualifier #2
• /BINARY qualifier #3
• /BINARY qualifier #4
• /BINARY qualifier #5
• Bit field operator (<p,s,e>)
• /BOTTOM qualifier
• /BRANCH qualifier #1
• /BRANCH qualifier #2
• /BRANCH qualifier #3
• /BRANCH qualifier #4
• /BRANCH qualifier #5
• /BRANCH qualifier #6
• /BRANCH qualifier #7
• /BRANCH qualifier #8
• /BRANCH qualifier #9
• Breakpoint view #1
• Breakpoint view #2
• Breakpoints
  • action #1
  • action #2
  • activating #1
  • activating #2
  • activating #3
  • activating #4
  • canceling #1
  • canceling #2
  • canceling #3
  • conditional #1
  • conditional #2
  • customizing display of Set/Show Breakpoint dialog box
  • deactivating #1
  • deactivating #2
  • deactivating #3
  • defined #1
  • defined #2
  • delayed triggering of #1
  • delayed triggering of #2
  • displaying #1
  • displaying #2
  • displaying #3
  • DO clause
  • exception #1
  • exception #2
  • exception #3
  • in tasking (multithread) program
  • on activation (multiprocess program)
  • on label
  • on routine #1
  • on routine #2
  • on source line #1
  • on source line #2
  • on task event
  • on termination (image exit)
  • on unaligned data
  • on vector instruction
  • predefined, tasking (multithread) program
  • saving when rerunning program #1
  • saving when rerunning program #2
  • saving with RERUN command #1
  • saving with RERUN command #2
  • saving with RERUN command #3
  • saving with RERUN command #4
  • setting #1
  • setting #2
  • setting #3
  • source display at
  • WHEN clause
• /BRIEF qualifier #1
• /BRIEF qualifier #2
• Built-in symbols
• Buttons
  • debugger push button view
    • customizing
• /BYTE
• /BYTE qualifier #1
• /BYTE qualifier #2
• /BYTE qualifier #3

• CALL command #1
• CALL command #2
  • and ASTs #1
  • and ASTs #2
  • and floating-point parameters
  • vectorized program
• Call-frame handlers
• Call frames
  • See Call stack
• /CALL qualifier #1
• /CALL qualifier #2
• /CALL qualifier #3
• /CALL qualifier #4
• /CALL qualifier #5
• /CALL qualifier #6
• /CALL qualifier #7
• /CALL qualifier #8
• /CALL qualifier #9
• Call stack
  • and instruction display #1
  • and instruction display #2
  • and instruction display #3
  • and register display #1
  • and register display #2
  • and register display #3
  • and source display #1
  • and source display #2
  • and source display #3
  • and symbol search #1
  • and symbol search #2
  • and symbol search #3
  • and symbol search #4
  • displaying #1
  • displaying #2
  • displaying #3
  • displaying #4
  • displaying #5
  • displaying #6
  • See also Scope
• Call stacks
  • and instruction display #1
  • and instruction display #2
  • and instruction display #3
  • and register display #1
  • and register display #2
  • and register display #3
  • and source display #1
  • and source display #2
  • and source display #3
  • and symbol search #1
  • and symbol search #2
  • and symbol search #3
  • and symbol search #4
  • displaying #1
  • displaying #2
  • displaying #3
  • displaying #4
  • displaying #5
  • displaying #6
• /CALLABLE_EDT qualifier
• /CALLABLE_LSEDIT qualifier
• /CALLABLE_TPU qualifier
• %CALLER_TASK built-in symbol
• /CALLS qualifier #1
• /CALLS qualifier #2
• /CALLS qualifier #3
• CANCEL ALL command
• CANCEL BREAK command #1
• CANCEL BREAK command #2
• CANCEL DISPLAY command #1
• CANCEL DISPLAY command #2
• CANCEL IMAGE command #1
• CANCEL IMAGE command #2
• CANCEL MODE command
• CANCEL MODULE command #1
• CANCEL MODULE command #2
• CANCEL RADIX command #1
• CANCEL RADIX command #2
• CANCEL SCOPE command #1
• CANCEL SCOPE command #2
• CANCEL SOURCE command #1
• CANCEL SOURCE command #2
• CANCEL TRACE command #1
• CANCEL TRACE command #2
• CANCEL TYPE/OVERRIDE command #1
• CANCEL TYPE/OVERRIDE command #2
• CANCEL WATCH command #1
• CANCEL WATCH command #2
• CANCEL WINDOW command #1
• CANCEL WINDOW command #2
• Case sensitivity
• Case-specific language and DEPOSIT/TYPE
• Catchall handler
• Catchall handlers
• Circumflex (^) #1
• Circumflex (^) #2
• Circumflex (^) #3
• /CLEAR qualifier
• Code
  • See Instructions, Address expressions
• Colon (:)
  • range delimiter #1
  • range delimiter #2
  • range delimiter #3
  • range delimiter #4
  • range delimiter #5
• Command formats
  • debugger #1
  • debugger #2
• Command interface
  • debugger
    • with DECwindows Motif #1
    • with DECwindows Motif #2
    • with DECwindows Motif #3
    • with DECwindows Motif #4
  • See also Debugger commands
• Command line editing keys
• Command procedures
  • debugger
  • default directory for #1
  • default directory for #2
  • default directory for #3
  • displaying commands in #1
  • displaying commands in #2
  • executing #1
  • executing #2
  • exiting #1
  • exiting #2
  • exiting #3
  • log file as
  • passing parameters to #1
  • passing parameters to #2
  • recreating displays with #1
  • recreating displays with #2
  • See also Initialization files, debugger
• /COMMAND qualifier #1
• /COMMAND qualifier #2
• /COMMAND qualifier #3
• /COMMAND qualifier #4
• Command view #1
• Command view #2
• Commands
  • binding to keys, customizing
• Comments
  • format
• Compilers
  • compiler generated type
  • compiling for debugging #1
  • compiling for debugging #2
  • /DEBUG qualifier #1
  • /DEBUG qualifier #2
  • /DEBUG qualifier #3
  • /LIST qualifier
  • /NOOPTIMIZE qualifier #1
  • /NOOPTIMIZE qualifier #2
• Concealed rooted-directory logical names
• Condition handlers
  • debugging
• /CONDITION_VALUE qualifier #1
• /CONDITION_VALUE qualifier #2
• CONNECT command #1
• CONNECT command #2
• CONNECT command #3
  • not for subprocess of process under debugger control
• Contents-of operator #1
• Contents-of operator #2
• Contents-of operator #3
• CONTROL_C_INTERCEPTION package
• Ctrl/C key sequence #1
• Ctrl/C key sequence #2
• Ctrl/C key sequence #3
• Ctrl/C key sequence #4
• Ctrl/W key sequence #1
• Ctrl/W key sequence #2
• Ctrl/Y--DEBUG
  • not supported for kept debugger
  • not supported in DECwindows Motif interface
• Ctrl/Y key sequence #1
• Ctrl/Y key sequence #2
• Ctrl/Y key sequence #3
• Ctrl/Y key sequence #4
• Ctrl/Y key sequence #5
  • interrupting tasks in debugger
• Ctrl/Z key sequence #1
• Ctrl/Z key sequence #2
• %CURDISP built-in symbol
• %CURLOC built-in symbol #1
• %CURLOC built-in symbol #2
• %CURLOC built-in symbol #3
• Current
  • display #1
  • display #2
  • display #3
  • display #4
  • entity #1
  • entity #2
  • entity #3
  • entity #4
  • image #1
  • image #2
  • image #3
  • language #1
  • language #2
  • language #3
  • location #1
  • location #2
  • location #3
  • location #4
  • location #5
  • radix #1
  • radix #2
  • radix #3
  • scope #1
  • scope #2
  • scope #3
  • type #1
  • type #2
  • type #3
  • value #1
  • value #2
• /CURRENT qualifier #1
• /CURRENT qualifier #2
• /CURRENT qualifier #3
• /CURRENT qualifier #4
• /CURRENT qualifier #5
• %CURRENT_SCOPE_ENTRY built-in symbol
• %CURSCROLL built-in symbol
• %CURVAL built-in symbol #1
• %CURVAL built-in symbol #2
• Customization
  • debugger #1
  • debugger #2
  • debugger #3
  • debugger #4
  • debugger #5
  • debugger #6
  • debugger #7
  • debugger #8
  • debugger #9
  • debugger #10
    • DECwindows Motif interface
  • debugger resource file
  • key bindings on keypad

  4538PIDX.HTM
  OSSG Documentation
  22-NOV-1996 13:03:12.96

Copyright © Digital Equipment Corporation 1996. All Rights Reserved.

Legal