OpenVMS Debugger Manual

• /QUADWORD
• /QUADWORD qualifier #1
• /QUADWORD qualifier #2
• /QUADWORD qualifier #3
• /QUADWORD qualifier #4
• /QUADWORD qualifier #5
• QUIT command #1
• QUIT command #2
  • multiprocess program #1
  • multiprocess program #2
• Quotas
• Quotation marks ( " ")
  • ASCII string delimiter
  • instruction delimiter

• Radixes
  • canceling
  • conversion #1
  • conversion #2
  • current #1
  • current #2
  • current #3
  • displaying
  • multilanguage program
  • specifying #1
  • specifying #2
• Ranges
  • colon (:) #1
  • colon (:) #2
  • colon (:) #3
  • colon (:) #4
  • colon (:) #5
• Real types
• REBOOT command
• Record types #1
• Record types #2
• Record types #3
• %REF built-in symbol
• /REFRESH qualifier
• Register view #1
• Register view #2
• Registers
  • built-in symbols #1
  • built-in symbols #2
  • depositing into #1
  • depositing into #2
  • display #1
  • display #2
    • for routine on call stack #1
    • for routine on call stack #2
    • for routine on call stack #3
  • display kind
  • examining #1
  • examining #2
  • PC
    • See PC
  • PSL
  • See also Vector registers
  • SET SCOPE/CURRENT command #1
  • SET SCOPE/CURRENT command #2
  • symbolizing #1
  • symbolizing #2
  • symbols #1
  • symbols #2
  • variable #1
  • variable #2
  • variable #3
  • view
  • watchpoint
• /RELATED qualifier #1
• /RELATED qualifier #2
• /RELATED qualifier #3
• /REMOVE qualifier #1
• /REMOVE qualifier #2
• REPEAT command #1
• REPEAT command #2
• RERUN command #1
• RERUN command #2
• RERUN command #3
• RERUN command #4
• RERUN command #5
• RERUN command #6
  • passing arguments
• Rerunning programs
  • under debugger control
  • under kept debugger control
• Resource file, debugger
  • customizing
• /RESTORE qualifier
• Return key
  • logical successor #1
  • logical successor #2
  • logical successor #3
• /RETURN qualifier #1
• /RETURN qualifier #2
• /RETURN qualifier #3
• /RIGHT qualifier #1
• /RIGHT qualifier #2
• /RIGHT qualifier #3
• Rooted-directory logical names
  • concealed
• Routines
  • breakpoint on #1
  • breakpoint on #2
  • call stack #1
  • call stack #2
  • call stack sequence #1
  • call stack sequence #2
  • calling #1
  • calling #2
  • calling #3
  • displaying instructions for, on call stack #1
  • displaying instructions for, on call stack #2
  • displaying instructions for, on call stack #3
  • displaying register values for, on call stack #1
  • displaying register values for, on call stack #2
  • displaying register values for, on call stack #3
  • displaying source code for, on call stack #1
  • displaying source code for, on call stack #2
  • displaying source code for, on call stack #3
  • EXAMINE/SOURCE command
  • multiple invocations of #1
  • multiple invocations of #2
  • returning from #1
  • returning from #2
  • SET BREAK command
  • SET SCOPE command #1
  • SET SCOPE command #2
  • SET TRACE command
  • SHOW CALLS command
  • STEP/INTO command
  • STEP/RETURN command
  • stepping into #1
  • stepping into #2
  • traceback information
  • tracepoint on
• RSTs (run-time symbol tables)
  • and symbol search
  • deleting symbol records in #1
  • deleting symbol records in #2
  • displaying modules in #1
  • displaying modules in #2
  • displaying symbols in #1
  • displaying symbols in #2
  • inserting symbol records in #1
  • inserting symbol records in #2
  • shareable image
• RUN command
  • DCL command #1
  • DCL command #2
  • DCL command #3
  • DCL command #4
  • DCL command #5
  • DCL command #6
  • debugger command #1
  • debugger command #2
  • debugger command #3
  • debugger command #4
  • debugger command #5
  • debugger command #6
  • passing arguments
  • See also Execution
• Run-time symbol tables
  • See RSTs
• Running programs
  • under debugger control
  • under kept debugger control

• S/call button
• S/in button #1
• S/in button #2
• S/ret button #1
• S/ret button #2
• SAVE command #1
• SAVE command #2
• SAVE command #3
• /SAVE qualifier
• /SAVE_VECTOR_STATE qualifier #1
• /SAVE_VECTOR_STATE qualifier #2
• Saving breakpoints #1
• Saving breakpoints #2
• Scalars
  • types of
• $SCHDWK call
• Scope
  • built-in symbol #1
  • built-in symbol #2
  • built-in symbol #3
  • current
  • default
  • for instruction display #1
  • for instruction display #2
  • for register display #1
  • for register display #2
  • for source display #1
  • for source display #2
  • for symbol search #1
  • for symbol search #2
  • for symbol search #3
  • for symbol search #4
  • PC #1
  • PC #2
  • relation to call stack #1
  • relation to call stack #2
  • relation to call stack #3
  • relation to call stack #4
  • relation to call stack #5
  • SEARCH command
  • search list #1
  • search list #2
  • SET SCOPE command #1
  • SET SCOPE command #2
  • SET SCOPE command #3
  • setting
  • specifying with path name
  • TYPE command
  • vector register
• Scopes
  • built-in symbol #1
  • built-in symbol #2
  • built-in symbol #3
  • canceling #1
  • canceling #2
  • current #1
  • current #2
  • current #3
  • default #1
  • default #2
  • default #3
  • default #4
  • displaying #1
  • displaying #2
  • for instruction display #1
  • for instruction display #2
  • for instruction display #3
  • for register display #1
  • for register display #2
  • for register display #3
  • for source display #1
  • for source display #2
  • for source display #3
  • for symbol search #1
  • for symbol search #2
  • for symbol search #3
  • for symbol search #4
  • for symbol search #5
  • for symbol search #6
  • for symbol search #7
  • for symbol search #8
  • PC #1
  • PC #2
  • relation to call stack #1
  • relation to call stack #2
  • relation to call stack #3
  • relation to call stack #4
  • relation to call stack #5
  • relation to call stack #6
  • relation to call stack #7
  • relation to call stack #8
  • SEARCH command #1
  • SEARCH command #2
  • search list #1
  • search list #2
  • search list #3
  • search list #4
  • search list #5
  • search list #6
  • SET SCOPE command #1
  • SET SCOPE command #2
  • SET SCOPE command #3
  • SET SCOPE command #4
  • SET SCOPE command #5
  • setting #1
  • setting #2
  • setting #3
  • specifying with path name
  • TYPE command #1
  • TYPE command #2
  • vector register
• Screen displays
  • See Displays, debugger, screen mode
• Screen management
  • debugging DECwindows Motif application
  • debugging screen-oriented program #1
  • debugging screen-oriented program #2
• Screen mode #1
• Screen mode #2
  • built-in symbol #1
  • built-in symbol #2
  • multiprocess program
  • predefined windows
• Screen-oriented programs
  • debugging #1
  • debugging #2
  • debugging #3
• Screen sizes
  • displaying #1
  • displaying #2
  • %PAGE, %WIDTH symbols
  • setting #1
  • setting #2
• /SCREEN_LAYOUT qualifier
• SCROLL command #1
• SCROLL command #2
• Scroll mode
• /SCROLL qualifier #1
• /SCROLL qualifier #2
• SEARCH command #1
• SEARCH command #2
  • displaying default qualifiers for #1
  • displaying default qualifiers for #2
  • setting default qualifiers for #1
  • setting default qualifiers for #2
• Search lists
  • scope #1
  • scope #2
  • scope #3
  • scope #4
  • scope #5
  • scope #6
  • source file #1
  • source file #2
  • source file #3
  • source file #4
• Security
  • image
  • terminal
• SELECT command #1
• SELECT command #2
• Semantic events
• /SEMANTIC_EVENT qualifier
• Semicolons (;)
  • command separator
• SET ABORT_KEY command #1
• SET ABORT_KEY command #2
• SET ATSIGN command #1
• SET ATSIGN command #2
• SET BREAK command #1
• SET BREAK command #2
• SET BREAK command #3
• SET BREAK command #4
• SET BREAK command #5
• SET BREAK command #6
• SET BREAK command #7
• SET BREAK/UNALIGNED_DATA command and system service routine
• SET DEFINE command #1
• SET DEFINE command #2
• SET EDITOR command #1
• SET EDITOR command #2
• SET EVENT_FACILITY command #1
• SET EVENT_FACILITY command #2
• SET IMAGE command #1
• SET IMAGE command #2
  • effect on symbol definitions
• SET KEY command #1
• SET KEY command #2
• SET LANGUAGE command #1
• SET LANGUAGE command #2
• SET LOG command #1
• SET LOG command #2
• SET MARGINS command #1
• SET MARGINS command #2
• SET MODE command
• SET MODE [NO]DYNAMIC command #1
• SET MODE [NO]DYNAMIC command #2
• SET MODE [NO]DYNAMIC command #3
• SET MODE [NO]G_FLOAT command
• SET MODE [NO]INTERRUPT command #1
• SET MODE [NO]INTERRUPT command #2
• SET MODE [NO]KEYPAD command #1
• SET MODE [NO]KEYPAD command #2
• SET MODE [NO]KEYPAD command #3
• SET MODE [NO]LINE command
• SET MODE [NO]OPERANDS command #1
• SET MODE [NO]OPERANDS command #2
• SET MODE [NO]SCREEN command #1
• SET MODE [NO]SCREEN command #2
• SET MODE [NO]SCROLL command
• SET MODE [NO]SEPARATE command #1
• SET MODE [NO]SEPARATE command #2
• SET MODE [NO]SEPARATE command #3
• SET MODE [NO]SYMBOLIC command #1
• SET MODE [NO]SYMBOLIC command #2
• SET MODULE command #1
• SET MODULE command #2
• SET MODULE command #3
• SET OUTPUT command
• SET OUTPUT [NO]LOG command #1
• SET OUTPUT [NO]LOG command #2
• SET OUTPUT [NO]SCREEN_LOG command #1
• SET OUTPUT [NO]SCREEN_LOG command #2
• SET OUTPUT [NO]TERMINAL command
• SET OUTPUT [NO]VERIFY command #1
• SET OUTPUT [NO]VERIFY command #2
• SET PROCESS command #1
• SET PROCESS command #2
• SET PROCESS command #3
• SET PROMPT command #1
• SET PROMPT command #2
  • multiprocess program
• SET RADIX command #1
• SET RADIX command #2
• SET RADIX command #3
• SET SCOPE command #1
• SET SCOPE command #2
• SET SCOPE command #3
• SET SCOPE command #4
• SET SCOPE command #5
• SET SCOPE command #6
• SET SEARCH command #1
• SET SEARCH command #2
• SET SOURCE command #1
• SET SOURCE command #2
  • with concealed rooted-directory logical name
• SET STEP command #1
• SET STEP command #2
• SET STEP command #3
• SET STEP command #4
• SET STEP command #5
• SET STEP SEMANTIC_EVENT command
• SET TASK/ACTIVE command, not for DECthreads #1
• SET TASK/ACTIVE command, not for DECthreads #2
• SET TASK command #1
• SET TASK command #2
• SET TASK command #3
• SET TERMINAL command #1
• SET TERMINAL command #2
• SET TRACE command #1
• SET TRACE command #2
• SET TRACE command #3
• SET TRACE command #4
• SET TRACE command #5
• SET TRACE command #6
• SET TRACE command #7
• SET TYPE command #1
• SET TYPE command #2
• SET TYPE/OVERRIDE command #1
• SET TYPE/OVERRIDE command #2
• SET VECTOR_MODE command #1
• SET VECTOR_MODE command #2
• SET WATCH command #1
• SET WATCH command #2
• SET WATCH command #3
• SET WATCH command #4
• SET WINDOW command #1
• SET WINDOW command #2
• /SET_STATE qualifier #1
• /SET_STATE qualifier #2
• /SFPCR qualifier
• /SHARE qualifier #1
• /SHARE qualifier #2
• /SHARE qualifier #3
• /SHARE qualifier #4
• /SHARE qualifier #5
• /SHARE qualifier #6
• Shareable images
  • CANCEL IMAGE command #1
  • CANCEL IMAGE command #2
  • debugging
  • See also Modules
  • SET BREAK/INTO command #1
  • SET BREAK/INTO command #2
  • SET IMAGE command #1
  • SET IMAGE command #2
  • SET STEP INTO command #1
  • SET STEP INTO command #2
  • SET TRACE/INTO command #1
  • SET TRACE/INTO command #2
  • SET WATCH command
  • SHOW IMAGE command #1
  • SHOW IMAGE command #2
  • STEP/INTO command
• /SHAREABLE qualifier
• Shared linkage images #1
• Shared linkage images #2
• /SHORT qualifier
• SHOW ABORT_KEY command #1
• SHOW ABORT_KEY command #2
• SHOW AST command #1
• SHOW AST command #2
• SHOW ATSIGN command #1
• SHOW ATSIGN command #2
• SHOW BREAK command #1
• SHOW BREAK command #2
  • not displaying individual instructions
• SHOW CALLS command #1
• SHOW CALLS command #2
• SHOW CALLS command #3
• SHOW CALLS command #4
• SHOW DEFINE command #1
• SHOW DEFINE command #2
• SHOW DISPLAY command #1
• SHOW DISPLAY command #2
• SHOW EDITOR command #1
• SHOW EDITOR command #2
• SHOW EVENT_FACILITY command #1
• SHOW EVENT_FACILITY command #2
• SHOW EVENT_FACILITY command #3
• SHOW EXIT_HANDLERS command #1
• SHOW EXIT_HANDLERS command #2
• SHOW IMAGE command #1
• SHOW IMAGE command #2
• SHOW KEY command #1
• SHOW KEY command #2
• SHOW LANGUAGE command #1
• SHOW LANGUAGE command #2
• SHOW LOG command #1
• SHOW LOG command #2
• SHOW MARGINS command #1
• SHOW MARGINS command #2
• SHOW MODE command
• SHOW MODULE command #1
• SHOW MODULE command #2
• SHOW MODULE command #3
• SHOW OUTPUT command #1
• SHOW OUTPUT command #2
• SHOW OUTPUT command #3
• SHOW PROCESS command #1
• SHOW PROCESS command #2
• SHOW PROCESS command #3
• SHOW RADIX command #1
• SHOW RADIX command #2
• SHOW SCOPE command #1
• SHOW SCOPE command #2
• SHOW SEARCH command #1
• SHOW SEARCH command #2
• SHOW SELECT command #1
• SHOW SELECT command #2
• SHOW SOURCE command #1
• SHOW SOURCE command #2
• SHOW STACK command #1
• SHOW STACK command #2
• SHOW STEP command #1
• SHOW STEP command #2
• SHOW SYMBOL command #1
• SHOW SYMBOL command #2
• SHOW SYMBOL command #3
• SHOW SYMBOL/DEFINED command
• SHOW TASK command #1
• SHOW TASK command #2
• SHOW TASK command #3
• SHOW TERMINAL command #1
• SHOW TERMINAL command #2
• SHOW TRACE command #1
• SHOW TRACE command #2
  • not displaying individual instructions
• SHOW TYPE command #1
• SHOW TYPE command #2
• SHOW VECTOR_MODE command #1
• SHOW VECTOR_MODE command #2
• SHOW WATCH command #1
• SHOW WATCH command #2
• SHOW WINDOW command #1
• SHOW WINDOW command #2
• /SILENT qualifier #1
• /SILENT qualifier #2
• /SILENT qualifier #3
• /SILENT qualifier #4
• /SILENT qualifier #5
• /SILENT qualifier #6
• /SIZE qualifier
• Slash (/)
  • division operator
• SMG$DEFAULT_CHARACTER_SET logical name
• SMG$ logical name
  • debugging screen-oriented program
• Source code
  • See Source display
• Source directory
  • displaying #1
  • displaying #2
  • search list #1
  • search list #2
  • search list #3
  • search list #4
• Source display #1
• Source display #2
• Source display #3
• Source display #4
  • discrepancies in #1
  • discrepancies in #2
  • discrepancies in #3
  • discrepancies in #4
  • display kind
  • EXAMINE/SOURCE command #1
  • EXAMINE/SOURCE command #2
  • EXAMINE/SOURCE command #3
  • EXAMINE/SOURCE command #4
  • for routine on call stack #1
  • for routine on call stack #2
  • for routine on call stack #3
  • line-oriented
  • main window
  • margins in #1
  • margins in #2
  • multiprocess program
  • not available #1
  • not available #2
  • not available #3
  • not available #4
  • not available #5
  • not available #6
  • optimized code #1
  • optimized code #2
  • optimized code #3
  • optimized code #4
  • SEARCH command #1
  • SEARCH command #2
  • SET BREAK command
  • SET SCOPE/CURRENT command #1
  • SET SCOPE/CURRENT command #2
  • SET STEP command #1
  • SET STEP command #2
  • SET TRACE command
  • SET WATCH command
  • source browser #1
  • source browser #2
  • SRC, predefined
  • STEP command
  • TYPE command #1
  • TYPE command #2
• Source files
  • correct version of #1
  • correct version of #2
  • correct version of #3
  • defined
  • file specification
  • location #1
  • location #2
  • location #3
  • location #4
  • location #5
  • not available #1
  • not available #2
  • not available #3
  • See also Source display
• Source lines
  • breakpoint on #1
  • breakpoint on #2
  • not available #1
  • not available #2
  • not available #3
  • See also Source display
  • tracepoint on
• /SOURCE qualifier #1
• /SOURCE qualifier #2
• /SOURCE qualifier #3
• /SOURCE qualifier #4
• /SOURCE qualifier #5
• /SOURCE qualifier #6
• /SOURCE qualifier #7
• /SOURCE qualifier #8
• /SOURCE qualifier #9
• /SOURCE qualifier #10
• /SOURCE qualifier #11
• Source window
  • See also Source display
• %SOURCE_SCOPE #1
• %SOURCE_SCOPE #2
• %SP built-in symbol #1
• %SP built-in symbol #2
• SPAWN command #1
• SPAWN command #2
• SPAWN/NOWAIT command and Kept debugger
• Split-lifetime variables
• SRC, source display, screen mode
• SS$_DEBUG condition
• SSI and static watchpoints
• Stack
  • See also Call stack, Scope
• Stack corruption, effect of
• Stack pointer #1
• Stack pointer #2
• Stack pointer (SP) #1
• Stack pointer (SP) #2
• Stack variables #1
• Stack variables #2
• Stack variables #3
• Starting debugger #1
• Starting debugger #2
• Starting debugger #3
• Starting kept debugger #1
• Starting kept debugger #2
• $START_ALIGN_FAULT_REPORT routine and SET BREAK/UNALIGNED DATA
• /START_POSITION qualifier
• /STATE qualifier #1
• /STATE qualifier #2
• /STATE qualifier #3
• /STATE qualifier #4
• /STATE qualifier #5
• /STATIC qualifier
• Static variables #1
• Static variables #2
• Static variables #3
• Static watchpoints and ASTs
• Static watchpoints and system service calls
• /STATISTICS qualifier
• STEP button #1
• STEP button #2
• STEP command #1
• STEP command #2
• STEP command #3
  • and instruction-level debugging
  • displaying default qualifiers for
  • multiprocess program
  • setting default qualifiers for
  • vectorized program
• STEP/OVER command and Fortran RTL routines
• STEP/SEMANTIC_EVENT command #1
• STEP/SEMANTIC_EVENT command #2
• Stop button #1
• Stop button #2
• /STRING qualifier #1
• /STRING qualifier #2
• String types #1
• String types #2
• Structure type
  • See Record type
• Successor
  • See Logical successor
• /SUFFIX qualifier #1
• /SUFFIX qualifier #2
• /SUFFIX qualifier #3
• /SUFFIX qualifier #4
• /SUFFIX qualifier #5
• /SUFFIX qualifier #6
• /SUFFIX qualifier #7
• /SUFFIX qualifier #8
• /SUFFIX qualifier #9
• /SUFFIX qualifier #10
• /SUFFIX qualifier #11
• Symbol records
  • See Symbols
• Symbol tables
  • See DST, GST, RST
• Symbolic mode #1
• Symbolic mode #2
• /SYMBOLIC qualifier #1
• /SYMBOLIC qualifier #2
• SYMBOLIZE command #1
• SYMBOLIZE command #2
• SYMBOLIZE command #3
• Symbolizing
  • address #1
  • address #2
  • address #3
  • register #1
  • register #2
  • vector register
• Symbols
  • ambiguity, resolving
  • built-in
  • compiler generated type
  • defining #1
  • defining #2
  • displaying #1
  • displaying #2
  • displaying #3
  • displaying #4
  • global #1
  • global #2
  • image setting
  • label #1
  • label #2
  • line number #1
  • line number #2
  • local #1
  • local #2
  • module setting
  • not in symbol table #1
  • not in symbol table #2
  • not unique #1
  • not unique #2
  • overloaded
  • relation to address expression
  • relation to path name
  • resolving ambiguities
  • routine #1
  • routine #2
  • search based on call stack #1
  • search based on call stack #2
  • search based on call stack #3
  • search based on call stack #4
  • search based on call stack #5
  • search conventions #1
  • search conventions #2
  • search conventions #3
  • See also DST, GST, RST, Scope
  • SET SCOPE command #1
  • SET SCOPE command #2
  • shareable image
  • SHOW SYMBOL command
  • symbolic mode #1
  • symbolic mode #2
  • traceback information
  • universal #1
  • universal #2
  • universal #3
  • universal #4
  • variable #1
  • variable #2
  • variable #3
  • variable #4
  • vector register
• Synchronization
  • debugging vectorized program #1
  • debugging vectorized program #2
  • debugging vectorized program #3
  • debugging vectorized program #4
  • delivery of vector exception #1
  • delivery of vector exception #2
  • delivery of vector exception #3
  • SET VECTOR_MODE command #1
  • SET VECTOR_MODE command #2
  • SHOW VECTOR_MODE command #1
  • SHOW VECTOR_MODE command #2
• SYNCHRONIZE VECTOR_MODE command #1
• SYNCHRONIZE VECTOR_MODE command #2
• SYS$EXIT system service
• /SYSEMULATE qualifer #1
• /SYSEMULATE qualifer #2
• /SYSEMULATE qualifer #3
• /SYSEMULATE qualifer #4
• System management
  • for multiprocess debugging
• /SYSTEM qualifier #1
• /SYSTEM qualifier #2
• /SYSTEM qualifier #3
• /SYSTEM qualifier #4
• System service calls and static watchpoints
• System service interception and /DEBUG
• System space
  • SET BREAK command
  • SET STEP command
  • SET TRACE command
  • STEP command
• /S_FLOAT qualifier #1
• /S_FLOAT qualifier #2

  4538PI04.HTM
  OSSG Documentation
  22-NOV-1996 13:03:08.74

Copyright © Digital Equipment Corporation 1996. All Rights Reserved.

Legal