OpenVMS System Management Utilities Reference Manual

Digital strongly recommends that you accept the default behavior of STARTUP.COM. If you must exclude a specific device from being configured, you must first prevent STARTUP.COM from performing the autoconfiguration by setting the SYSBOOT parameter NOAUTOCONFIG. After invoking SYSGEN, you should ensure that the base asynchronous serial ports are always autoconfigured. To do this, enter the following command:

SYSGEN> AUTOCONFIGURE ALL/SELECT=TT:

You can also enter an AUTOCONFIGURE ALL/EXCLUDE=(device-name[,...]) command, making sure not to exclude the serial lines. Subsequent CONNECT statements should be written with the appropriate csr_addr value to the command's /CSR qualifier, as shown in Table K-2. These csr_addr values are actually offsets from the beginning of VAXstation 2000 and MicroVAX 2000 I/O space (EXE$GL_CPUNODSP), thus differing from the customary bus address value traditionally specified for UNIBUS devices in the CONNECT command.

Table K-2 VAXstation 2000 Autoconfiguration Table (VAX Only)
Device Name Driver CSR Number of Vectors First Vector Vector Offset

Standard Serial Lines TT YEDRIVER ^X0800 2 ^O300 4

ST506 Disk Controller DU DVDRIVER ^X0C00 1 ^O774 ---

TK50 Tape Controller MU TVDRIVER ^X0C80 1 ^O770 ---

Ethernet Controller ES ESDRIVER ^X4E00 1 ^O120 ---

MicroVAX 2000 Serial Lines YF YFDRIVER ^X6800 2 ^O104 4

32-Channel Synchronous Lines ZS ZSDRIVER ^X6800 1 ^O110 ---

Color Video Option VA VFDRIVER ^X6A00 2 ^O104 4

Black & White Video Option VC VEDRIVER ^X5000 1 ^O104 ---

**Table K-2 VAXstation 2000 Autoconfiguration Table (VAX Only)**
Device	Name	Driver	CSR	Number of Vectors	First Vector	Vector Offset
Standard Serial Lines	TT	YEDRIVER	^X0800	2	^O300	4
ST506 Disk Controller	DU	DVDRIVER	^X0C00	1	^O774	---
TK50 Tape Controller	MU	TVDRIVER	^X0C80	1	^O770	---
Ethernet Controller	ES	ESDRIVER	^X4E00	1	^O120	---
MicroVAX 2000 Serial Lines	YF	YFDRIVER	^X6800	2	^O104	4
32-Channel Synchronous Lines	ZS	ZSDRIVER	^X6800	1	^O110	---
Color Video Option	VA	VFDRIVER	^X6A00	2	^O104	4
Black & White Video Option	VC	VEDRIVER	^X5000	1	^O104	---

Examples of correct CONNECT commands for VAXstation 2000 and MicroVAX 2000 devices include the following:

CONNECT ESA0 /ADAP=0 /CSR=%X4E00 /VECT=%O120 /NUMV=01 /DRIVER=ESDRIVER 
CONNECT MUA0 /ADAP=0 /CSR=%X0C80 /VECT=%O770 /NUMV=01 /DRIVER=TVDRIVER 
CONNECT DUA0 /ADAP=0 /CSR=%X0C00 /VECT=%O774 /NUMV=01 /DRIVER=DVDRIVER 
CONNECT DUA1 /ADAP=0 /CSR=%X0C00 /VECT=%O774 /NUMV=01 /DRIVER=DVDRIVER 
CONNECT DUA2 /ADAP=0 /CSR=%X0C00 /VECT=%O774 /NUMV=01 /DRIVER=DVDRIVER 
CONNECT VCA0 /ADAP=0 /CSR=%X5000 /VECT=%O104 /NUMV=01 /DRIVER=VEDRIVER 
CONNECT VCA0 /ADAP=0 /CSR=%X5000 /VECT=%O104 /NUMV=02 /DRIVER=VFDRIVER

  6048P071.HTM
  OSSG Documentation
  26-NOV-1996 12:44:12.05

Legal