OpenVMS System Services Reference Manual

You can specify the following output value item code:

SJC$_ENTRY_NUMBER_OUTPUT

SJC$_CREATE_QUEUE

This request creates a queue. If the queue already exists and is not stopped, this request performs no operation. However, if the queue already exists and is stopped, the request alters the parameters of the queue based on the item codes specified in the request; if you specify the SJC$_CREATE_START item code, the request starts the queue.

You must specify the following input value item code:

SJC$_QUEUE

You can specify the following input value or Boolean item codes:

SJC$_AUTOSTART_ON ---

SJC$_BASE_PRIORITY ---

SJC$_BATCH SJC$_NO_BATCH

SJC$_CHARACTERISTIC_NAME SJC$_NO_CHARACTERISTICS

SJC$_CHARACTERISTIC_NUMBER ---

SJC$_CLOSE_QUEUE ---

SJC$_CPU_DEFAULT SJC$_NO_CPU_DEFAULT

SJC$_CPU_LIMIT SJC$_NO_CPU_LIMIT

SJC$_CREATE_START ---

SJC$_DEFAULT_FORM_NAME ---

SJC$_DEFAULT_FORM_NUMBER ---

SJC$_DEVICE_NAME ---

SJC$_FILE_BURST SJC$_NO_FILE_BURST

SJC$_FILE_BURST_ONE ---

SJC$_FILE_FLAG SJC$_NO_FILE_FLAG

SJC$_FILE_FLAG_ONE ---

SJC$_FILE_TRAILER SJC$_NO_FILE_TRAILER

SJC$_FILE_TRAILER_ONE ---

SJC$_FORM_NAME ---

SJC$_FORM_NUMBER ---

SJC$_GENERIC_QUEUE SJC$_NO_GENERIC_QUEUE

SJC$_GENERIC_SELECTION SJC$_NO_GENERIC_SELECTION

SJC$_GENERIC_TARGET ---

SJC$_JOB_BURST SJC$_NO_JOB_BURST

SJC$_JOB_FLAG SJC$_NO_JOB_FLAG

SJC$_JOB_LIMIT ---

SJC$_JOB_RESET_MODULES SJC$_NO_JOB_RESET_MODULES

SJC$_JOB_SIZE_MAXIMUM SJC$_NO_JOB_SIZE_MAXIMUM

SJC$_JOB_SIZE_MINIMUM SJC$_NO_JOB_SIZE_MINIMUM

SJC$_JOB_SIZE_SCHEDULING SJC$_NO_JOB_SIZE_SCHEDULING

SJC$_JOB_TRAILER SJC$_NO_JOB_TRAILER

SJC$_LIBRARY_SPECIFICATION SJC$_NO_LIBRARY_SPECIFICATION

SJC$_OPEN_QUEUE ---

SJC$_OWNER_UIC ---

SJC$_PAGINATE SJC$_NO_PAGINATE

SJC$_PRINTER ---

SJC$_PROCESSOR SJC$_NO_PROCESSOR

SJC$_PROTECTION ---

SJC$_QUEUE_DESCRIPTION SJC$_NO_QUEUE_DESCRIPTION

SJC$_QUEUE_MANAGER_NAME ---

SJC$_RECORD_BLOCKING SJC$_NO_RECORD_BLOCKING

SJC$_RETAIN_ALL_JOBS SJC$_NO_RETAIN_JOBS

SJC$_RETAIN_ERROR_JOBS ---

SJC$_SCSNODE_NAME ---

SJC$_SERVER ---

SJC$_SWAP SJC$_NO_SWAP

SJC$_TERMINAL SJC$_NO_TERMINAL

SJC$_WSDEFAULT SJC$_NO_WSDEFAULT

SJC$_WSEXTENT SJC$_NO_WSEXTENT

SJC$_WSQUOTA SJC$_NO_WSQUOTA

SJC$_DEASSIGN_QUEUE

This request deassigns a logical queue from an execution queue.

You must specify the following input value item code:

SJC$_QUEUE

SJC$_DEFINE_CHARACTERISTIC

This request defines a characteristic name and number and inserts this definition into the queue file. The characteristic name can be up to 31 characters in length. Each characteristic name must have a unique number in the range 0 to 127. If the characteristic name is already defined, the request alters the definition of the characteristic.

A job cannot execute on an execution queue unless the queue possesses all the characteristics possessed by the job; the queue can possess additional characteristics and the job will still execute.

You must specify the following input value item codes:

SJC$_CHARACTERISTIC_NAME
SJC$_CHARACTERISTIC_NUMBER

SJC$_DEFINE_FORM

This request defines a form name and number, as well as other physical attributes of the paper stock used in printers, and inserts this definition into the system job queue file. If the form name is already defined, this request alters the definition of the form.

Forms are used only by output execution queues and print jobs. A print job cannot execute unless the stock name of a form specified for the queue is the same as the stock name specified for the job. The stock name of a form, which you specify by using the SJC$_FORM_STOCK item code, specifies the paper stock used by the printer. Other item codes specify printing parameters for a job such as the margins, length of paper, and so on.

Each form must have a unique number. Numbers can range from 0 to 9999. When a new queue file is created, the system supplies the definition of a form named DEFAULT with number 0 and default characteristics.

You must specify the following input value item codes:

SJC$_FORM_NAME
SJC$_FORM_NUMBER

You can specify the following input value or Boolean item codes:

SJC$_FORM_DESCRIPTION ---

SJC$_FORM_LENGTH ---

SJC$_FORM_MARGIN_BOTTOM ---

SJC$_FORM_MARGIN_LEFT ---

SJC$_FORM_MARGIN_RIGHT ---

SJC$_FORM_MARGIN_TOP ---

SJC$_FORM_SETUP_MODULES SJC$_NO_FORM_SETUP_MODULES

SJC$_FORM_SHEET_FEED SJC$_NO_FORM_SHEET_FEED

SJC$_FORM_STOCK ---

SJC$_FORM_TRUNCATE SJC$_NO_FORM_TRUNCATE

SJC$_FORM_WIDTH ---

SJC$_FORM_WRAP SJC$_NO_FORM_WRAP

SJC$_PAGE_SETUP_MODULES SJC$_NO_PAGE_SETUP_MODULES

SJC$_DELETE_CHARACTERISTIC

This request deletes the definition of a characteristic name.

You must specify the following input value item code:

SJC$_CHARACTERISTIC_NAME

SJC$_DELETE_FORM

This request deletes the definition of a form name. There must be no queues or jobs that reference the form.

You must specify the following input value item code:

SJC$_FORM_NAME

SJC$_DELETE_JOB

This request deletes a job from the system job queue file. If the job is currently executing, it is aborted. If you specify the SJC$_QUEUE item code, the $SNDJBC service verifies that the selected job entry exists on the specified queue before deleting the job.

You must specify the following input value item code:

SJC$_ENTRY_NUMBER

You can specify the following input value item code:

SJC$_QUEUE

If you specify the SJC$_QUEUE item code, the $SNDJBC service verifies that the selected job entry exists on the specified queue before deleting the job.

SJC$_DELETE_QUEUE

This request deletes a queue and all of the jobs in the queue. The queue must be stopped, and there must be no other queues or jobs that reference the queue.

You must specify the following input value item code:

SJC$_QUEUE

SJC$_DELETE_QUEUE_MANAGER

This request removes all references to the specified queue manager from the shared master file. It also deletes the queue and journal files associated with the queue manager. A queue manager must be stopped to be deleted.

You must specify the following input value item code:

SJC$_QUEUE_MANAGER_NAME

SJC$_DISABLE_AUTOSTART

This request disables autostart on a node. By default, SJC$_DISABLE_AUTOSTART affects the requesting node. To disable autostart on a node other than the node from which the $SNDJBC request is sent, use the SJC$_SCSNODE_NAME item code to specify the affected node.

Disabling autostart on a node forces the appropriate queue manager to perform these tasks:

Prevent autostart queues from failing over to the node.
Mark all of that queue manager's autostart queues on the node as "stop pending" in preparation for a planned shutdown, allowing jobs currently executing on the queues to complete.
Force all autostart queues with failover lists to fail over to the next available node in the queue manager's failover list on which autostart is enabled. Each queue fails over when all jobs currently executing on any of that queue manager's queues on the node have completed.

You can specify the following input value item codes:

SJC$_QUEUE_MANAGER_NAME
SJC$_SCSNODE_NAME

For more information, see the OpenVMS System Manager's Manual.

SJC$_ENABLE_AUTOSTART

This request notifies the appropriate queue manager process that a node has progressed sufficiently in its startup procedure that batch and print jobs should execute. By default, SJC$_ENABLE_AUTOSTART affects the requesting node. To enable autostart on a node other than the node from which the $SNDJBC request is sent, use the SJC$_SCSNODE_NAME item code to specify the affected node. Once autostart is enabled, the queue manager starts all autostart-active queues on the appropriate node.

When a node reboots, autostart is disabled until the SJC$_ENABLE_AUTOSTART request is entered.

You can specify the following input value item codes:

SJC$_QUEUE_MANAGER_NAME
SJC$_SCSNODE_NAME

For more information, see the OpenVMS System Manager's Manual.

SJC$_ENTER_FILE

This request creates a job containing one file and places the job in the specified queue. To create a job with more than one file, you must make a sequence of calls to the $SNDJBC service using the SJC$_CREATE_JOB, SJC$_ADD_FILE, and SJC$_CLOSE_JOB function codes.

You must specify the following input value item code:

SJC$_QUEUE

You must specify one of the following input value item codes:

SJC$_FILE_IDENTIFICATION
SJC$_FILE_SPECIFICATION

You can specify the following input value or Boolean item codes:

SJC$_ACCOUNT_NAME ---

SJC$_AFTER_TIME SJC$_NO_AFTER_TIME

SJC$_CHARACTERISTIC_NAME SJC$_NO_CHARACTERISTICS

SJC$_CHARACTERISTIC_NUMBER ---

SJC$_CLI SJC$_NO_CLI

SJC$_CPU_LIMIT SJC$_NO_CPU_LIMIT

SJC$_DELETE_FILE SJC$_NO_DELETE_FILE

SJC$_DOUBLE_SPACE SJC$_NO_DOUBLE_SPACE

SJC$_FILE_BURST SJC$_NO_FILE_BURST

SJC$_FILE_COPIES ---

SJC$_FILE_FLAG SJC$_NO_FILE_FLAG

SJC$_FILE_SETUP_MODULES SJC$_NO_FILE_SETUP_MODULES

SJC$_FILE_TRAILER SJC$_NO_FILE_TRAILER

SJC$_FIRST_PAGE SJC$_NO_FIRST_PAGE

SJC$_FORM_NAME ---

SJC$_FORM_NUMBER ---

SJC$_HOLD SJC$_NO_HOLD

SJC$_JOB_COPIES ---

SJC$_JOB_DEFAULT_RETAIN ---

SJC$_JOB_ERROR_RETAIN ---

SJC$_JOB_NAME ---

SJC$_JOB_RETAIN ---

SJC$_JOB_RETAIN_TIME ---

SJC$_LAST_PAGE SJC$_NO_LAST_PAGE

SJC$_LOG_DELETE SJC$_NO_LOG_DELETE

SJC$_LOG_QUEUE ---

SJC$_LOG_SPECIFICATION SJC$_NO_LOG_SPECIFICATION

SJC$_LOG_SPOOL SJC$_NO_LOG_SPOOL

SJC$_LOWERCASE SJC$_NO_LOWERCASE

SJC$_NOTE SJC$_NO_NOTE

SJC$_NOTIFY SJC$_NO_NOTIFY

SJC$_OPERATOR_REQUEST SJC$_NO_OPERATOR_REQUEST

SJC$_PAGE_HEADER SJC$_NO_PAGE_HEADER

SJC$_PAGINATE SJC$_NO_PAGINATE

SJC$_PARAMETER_1 through 8 SJC$_NO_PARAMETERS

SJC$_PASSALL SJC$_NO_PASSALL

SJC$_PRIORITY ---

SJC$_RESTART SJC$_NO_RESTART

SJC$_UIC ---

SJC$_USERNAME ---

SJC$_WSDEFAULT SJC$_NO_WSDEFAULT

SJC$_WSEXTENT SJC$_NO_WSEXTENT

SJC$_WSQUOTA SJC$_NO_WSQUOTA

You can specify the following output value item codes:

SJC$_ENTRY_NUMBER_OUTPUT
SJC$_JOB_STATUS_OUTPUT

SJC$_MERGE_QUEUE

This request requeues all jobs in the queue specified by the item code SJC$_QUEUE to the queue specified by the item code SJC$_DESTINATION_QUEUE. The execution of current jobs is unaffected.

You must specify the following input value item codes:

SJC$_DESTINATION_QUEUE
SJC$_QUEUE

SJC$_PAUSE_QUEUE

This request pauses the execution of current jobs in the specified queue and prevents the starting of jobs in that queue.

You must specify the following input value item code:

SJC$_QUEUE

SJC$_RESET_QUEUE

This request resets the specified queue by (1) terminating and deleting each executing job that is not restartable, (2) terminating and requeuing each executing job that is restartable, and (3) stopping the queue.

You must specify the following input value item code:

SJC$_QUEUE

SJC$_START_ACCOUNTING

This request performs two functions. If you specify the SJC$_ACCOUNTING_TYPES item code, the request enables recording of the specified types of accounting records; if you do not specify SJC$_ACCOUNTING_TYPES, the request starts the accounting manager and opens the system accounting file.

You can specify the following input value or Boolean item codes:

SJC$_ACCOUNTING_TYPES
SJC$_NEW_VERSION

SJC$_START_QUEUE

This request permits the starting of jobs in the specified queue. If the queue was paused, current jobs are resumed.

You must specify the following input value item code:

SJC$_QUEUE

You can specify the following input value or Boolean item codes:

SJC$_ALIGNMENT_MASK ---

SJC$_ALIGNMENT_PAGES ---

SJC$_AUTOSTART_ON ---

SJC$_BASE_PRIORITY ---

SJC$_BATCH SJC$_NO_BATCH

SJC$_CHARACTERISTIC_NAME SJC$_NO_CHARACTERISTICS

SJC$_CHARACTERISTIC_NUMBER ---

SJC$_CLOSE_QUEUE ---

SJC$_CPU_DEFAULT SJC$_NO_CPU_DEFAULT

SJC$_CPU_LIMIT SJC$_NO_CPU_LIMIT

SJC$_DEFAULT_FORM_NAME ---

SJC$_DEFAULT_FORM_NUMBER ---

SJC$_DEVICE_NAME ---

SJC$_FILE_BURST SJC$_NO_FILE_BURST

SJC$_FILE_BURST_ONE ---

SJC$_FILE_FLAG SJC$_NO_FILE_FLAG

SJC$_FILE_FLAG_ONE ---

SJC$_FILE_TRAILER SJC$_NO_FILE_TRAILER

SJC$_FILE_TRAILER_ONE ---

SJC$_FORM_NAME ---

SJC$_FORM_NUMBER ---

SJC$_GENERIC_QUEUE SJC$_NO_GENERIC_QUEUE

SJC$_GENERIC_SELECTION SJC$_NO_GENERIC_SELECTION

SJC$_GENERIC_TARGET ---

SJC$_JOB_BURST SJC$_NO_JOB_BURST

SJC$_JOB_FLAG SJC$_NO_JOB_FLAG

SJC$_JOB_LIMIT ---

SJC$_JOB_RESET_MODULES SJC$_NO_JOB_RESET_MODULES

SJC$_JOB_SIZE_MAXIMUM SJC$_NO_JOB_SIZE_MAXIMUM

SJC$_JOB_SIZE_MINIMUM SJC$_NO_JOB_SIZE_MINIMUM

SJC$_JOB_SIZE_SCHEDULING SJC$_NO_JOB_SIZE_SCHEDULING

SJC$_JOB_TRAILER SJC$_NO_JOB_TRAILER

SJC$_LIBRARY_SPECIFICATION SJC$_NO_LIBRARY_SPECIFICATION

SJC$_NEXT_JOB ---

SJC$_OPEN_QUEUE ---

SJC$_OWNER_UIC ---

SJC$_PAGINATE SJC$_NO_PAGINATE

SJC$_PROCESSOR SJC$_NO_PROCESSOR

SJC$_PROTECTION ---

SJC$_QUEUE_DESCRIPTION SJC$_NO_QUEUE_DESCRIPTION

SJC$_RECORD_BLOCKING SJC$_NO_RECORD_BLOCKING

SJC$_RELATIVE_PAGE ---

SJC$_RETAIN_ALL_JOBS SJC$_NO_RETAIN_JOBS

SJC$_RETAIN_ERROR_JOBS ---

SJC$_SCSNODE_NAME ---

SJC$_SEARCH_STRING ---

SJC$_SWAP SJC$_NO_SWAP

SJC$_TERMINAL SJC$_NO_TERMINAL

SJC$_TOP_OF_FILE ---

SJC$_WSDEFAULT SJC$_NO_WSDEFAULT

SJC$_WSEXTENT SJC$_NO_WSEXTENT

SJC$_WSQUOTA SJC$_NO_WSQUOTA

SJC$_START_QUEUE_MANAGER

This request starts the clusterwide queue manager for the batch and print queuing system. It also opens the queue database.

The SJC$_START_QUEUE_MANAGER request has the following five uses:

To create a queue database and initially start the queue manager, issue a SJC$_START_QUEUE_MANAGER request with the SJC$_NEW_VERSION item code. See the description of the SJC$_NEW_VERSION item code for more information. Once the queue manager has been started, it will remain running unless it is explicitly stopped with an SJC$_STOP_QUEUE_MANAGER request.
If an SJC$_STOP_QUEUE_MANAGER request has been specified, issue a SJC$_START_QUEUE_MANAGER request to restart the queue manager.
In an OpenVMS Cluster environment, issue an SJC$_START_QUEUE_MANAGER request with the SJC$_QUEUE_MANAGER_NODES item code to modify the list of preferred nodes on which the queue manager can run. See the description of the SJC_QUEUE_MANAGER_NODES item code for more information.
In a cluster, issue an SJC$_START_QUEUE_MANAGER request to ensure that the queue manager process is executing on the most preferred, available node. If the queue manager is not running on the most preferred, available node, the queue manager will be moved to that node without interruption of service. If you are using the default node list (*), the queue manager will not move. For more information, see the description of the SJC$_QUEUE_MANAGER_NODES item code.
To create additional queue managers, issue an SJC$_START_QUEUE_MANAGER request with the SJC$_ADD_QUEUE_MANAGER and SJC$_QUEUE_MANAGER_NAME item codes. Note that the queue manager name must be different from the name of any queue manager currently defined. For more information about creating multiple queue managers, see the OpenVMS System Manager's Manual.

You can specify the following input value or Boolean item codes:

SJC$_ADD_QUEUE_MANAGER
SJC$_NEW_VERSION
SJC$_QUEUE_DIRECTORY
SJC$_QUEUE_MANAGER_NAME
SJC$_QUEUE_MANAGER_NODES

SJC$_STOP_ACCOUNTING

This request performs two functions. If you specify the SJC$_ACCOUNTING_TYPES item code, the request disables recording of the specified types of accounting records. If you do not specify SJC$_ACCOUNTING_TYPES, the request stops the accounting manager and closes the system accounting file.

You can specify the following input value item code:

SJC$_ACCOUNTING_TYPES

SJC$_STOP_ALL_QUEUES_ON_NODE

This request stops all queues on a specific node. By default, all queues on the requesting node are stopped. To stop all queues on a node other than the node from which the $SNDJBC request is sent, use the SJC$_SCSNODE_NAME item code to specify the affected node.

Besides stopping all queues on a specific node, this request aborts each job that is currently executing. Aborted jobs that are restartable are requeued. Queues for which an autostart list has been specified fail over to the first available node in the list for which autostart is enabled.

You can specify the following input value item codes:

SJC$_QUEUE_MANAGER_NAME
SJC$_SCSNODE_NAME

SJC$_STOP_QUEUE

This request prevents the starting of jobs in the specified queue. The execution of current jobs is unaffected.

You must specify the following input value item code:

SJC$_QUEUE

SJC$_STOP_QUEUE_MANAGER

This request shuts down the appropriate queue manager. It disables autostart on all nodes; stops all queues; aborts each job that is currently executing, requeuing those jobs that are restartable; and closes the files of the queue database.

You can specify the following input value item code:

SJC$_QUEUE_MANAGER_NAME

SJC$_SYNCHRONIZE_JOB

This request waits for the completion of a job, then sets the event flag, executes the completion AST if you specified astadr, and returns the completion status of the job to the I/O Status Block, provided you specified the iosb argument.

You must specify one of the following input value item codes:

SJC$_ENTRY_NUMBER
SJC$_QUEUE

If SJC$_QUEUE queue is specified, then you must also specify one of the following:

SJC$_ENTRY_NUMBER
SJC$_JOB_NAME

SJC$_WRITE_ACCOUNTING

This request writes an accounting record.

You must specify the following input value item code:

SJC$_ACCOUNTING_MESSAGE

ITEM CODES

SJC$_ACCOUNT_NAME
The SJC$_ACCOUNT_NAME item code is an input value item code. It specifies the account name of the user on behalf of whom the request is made. The buffer must specify a string from 1 to 8 characters. By default, the account name for batch and print jobs is taken from the requesting process.
You need CMKRNL privilege to use this item code.
(Valid for SJC$_CREATE_JOB, SJC$_ENTER_FILE function codes)
SJC$_ACCOUNTING_MESSAGE
The SJC$_ACCOUNTING_MESSAGE item code is an input value item code. It causes the contents of the buffer to be placed in a "user message" accounting record. The buffer must specify a string from 1 to 255 characters.
(Valid for SJC$_WRITE_ACCOUNTING function code)
SJC$_ACCOUNTING_TYPES
The SJC$_ACCOUNTING_TYPES item code is an input value item code. It enables or disables accounting-record types. When an accounting-record type is enabled, the event designated by that type will be recorded in the accounting record. The buffer must contain a longword bit vector wherein each bit set specifies an accounting-record type. Undefined bits must be 0.
The $SJCDEF macro defines the symbolic names for the accounting-record types. Following is a list of each accounting-record type and the system event to which it corresponds.

Accounting-Record Type Corresponding System Event

SJC$V_ACCT_IMAGE Image terminations

SJC$V_ACCT_LOGIN_FAILURE Login failures

SJC$V_ACCT_MESSAGE User messages sent

SJC$V_ACCT_PRINT Print job terminations

SJC$V_ACCT_PROCESS Process terminations

Previous | Next | Contents | [Home] | [Comments] | [Ordering info] | [Help]
  4527P072.HTM
  OSSG Documentation
  22-NOV-1996 13:00:40.41
Copyright © Digital Equipment Corporation 1996. All Rights Reserved.

Legal

SJC$_AUTOSTART_ON	---
SJC$_BASE_PRIORITY	---
SJC$_BATCH	SJC$_NO_BATCH
SJC$_CHARACTERISTIC_NAME	SJC$_NO_CHARACTERISTICS
SJC$_CHARACTERISTIC_NUMBER	---
SJC$_CLOSE_QUEUE	---
SJC$_CPU_DEFAULT	SJC$_NO_CPU_DEFAULT
SJC$_CPU_LIMIT	SJC$_NO_CPU_LIMIT
SJC$_CREATE_START	---
SJC$_DEFAULT_FORM_NAME	---
SJC$_DEFAULT_FORM_NUMBER	---
SJC$_DEVICE_NAME	---
SJC$_FILE_BURST	SJC$_NO_FILE_BURST
SJC$_FILE_BURST_ONE	---
SJC$_FILE_FLAG	SJC$_NO_FILE_FLAG
SJC$_FILE_FLAG_ONE	---
SJC$_FILE_TRAILER	SJC$_NO_FILE_TRAILER
SJC$_FILE_TRAILER_ONE	---
SJC$_FORM_NAME	---
SJC$_FORM_NUMBER	---
SJC$_GENERIC_QUEUE	SJC$_NO_GENERIC_QUEUE
SJC$_GENERIC_SELECTION	SJC$_NO_GENERIC_SELECTION
SJC$_GENERIC_TARGET	---
SJC$_JOB_BURST	SJC$_NO_JOB_BURST
SJC$_JOB_FLAG	SJC$_NO_JOB_FLAG
SJC$_JOB_LIMIT	---
SJC$_JOB_RESET_MODULES	SJC$_NO_JOB_RESET_MODULES
SJC$_JOB_SIZE_MAXIMUM	SJC$_NO_JOB_SIZE_MAXIMUM
SJC$_JOB_SIZE_MINIMUM	SJC$_NO_JOB_SIZE_MINIMUM
SJC$_JOB_SIZE_SCHEDULING	SJC$_NO_JOB_SIZE_SCHEDULING
SJC$_JOB_TRAILER	SJC$_NO_JOB_TRAILER
SJC$_LIBRARY_SPECIFICATION	SJC$_NO_LIBRARY_SPECIFICATION
SJC$_OPEN_QUEUE	---
SJC$_OWNER_UIC	---
SJC$_PAGINATE	SJC$_NO_PAGINATE
SJC$_PRINTER	---
SJC$_PROCESSOR	SJC$_NO_PROCESSOR
SJC$_PROTECTION	---
SJC$_QUEUE_DESCRIPTION	SJC$_NO_QUEUE_DESCRIPTION
SJC$_QUEUE_MANAGER_NAME	---
SJC$_RECORD_BLOCKING	SJC$_NO_RECORD_BLOCKING
SJC$_RETAIN_ALL_JOBS	SJC$_NO_RETAIN_JOBS
SJC$_RETAIN_ERROR_JOBS	---
SJC$_SCSNODE_NAME	---
SJC$_SERVER	---
SJC$_SWAP	SJC$_NO_SWAP
SJC$_TERMINAL	SJC$_NO_TERMINAL
SJC$_WSDEFAULT	SJC$_NO_WSDEFAULT
SJC$_WSEXTENT	SJC$_NO_WSEXTENT
SJC$_WSQUOTA	SJC$_NO_WSQUOTA

SJC$_FORM_DESCRIPTION	---
SJC$_FORM_LENGTH	---
SJC$_FORM_MARGIN_BOTTOM	---
SJC$_FORM_MARGIN_LEFT	---
SJC$_FORM_MARGIN_RIGHT	---
SJC$_FORM_MARGIN_TOP	---
SJC$_FORM_SETUP_MODULES	SJC$_NO_FORM_SETUP_MODULES
SJC$_FORM_SHEET_FEED	SJC$_NO_FORM_SHEET_FEED
SJC$_FORM_STOCK	---
SJC$_FORM_TRUNCATE	SJC$_NO_FORM_TRUNCATE
SJC$_FORM_WIDTH	---
SJC$_FORM_WRAP	SJC$_NO_FORM_WRAP
SJC$_PAGE_SETUP_MODULES	SJC$_NO_PAGE_SETUP_MODULES

SJC$_ACCOUNT_NAME	---
SJC$_AFTER_TIME	SJC$_NO_AFTER_TIME
SJC$_CHARACTERISTIC_NAME	SJC$_NO_CHARACTERISTICS
SJC$_CHARACTERISTIC_NUMBER	---
SJC$_CLI	SJC$_NO_CLI
SJC$_CPU_LIMIT	SJC$_NO_CPU_LIMIT
SJC$_DELETE_FILE	SJC$_NO_DELETE_FILE
SJC$_DOUBLE_SPACE	SJC$_NO_DOUBLE_SPACE
SJC$_FILE_BURST	SJC$_NO_FILE_BURST
SJC$_FILE_COPIES	---
SJC$_FILE_FLAG	SJC$_NO_FILE_FLAG
SJC$_FILE_SETUP_MODULES	SJC$_NO_FILE_SETUP_MODULES
SJC$_FILE_TRAILER	SJC$_NO_FILE_TRAILER
SJC$_FIRST_PAGE	SJC$_NO_FIRST_PAGE
SJC$_FORM_NAME	---
SJC$_FORM_NUMBER	---
SJC$_HOLD	SJC$_NO_HOLD
SJC$_JOB_COPIES	---
SJC$_JOB_DEFAULT_RETAIN	---
SJC$_JOB_ERROR_RETAIN	---
SJC$_JOB_NAME	---
SJC$_JOB_RETAIN	---
SJC$_JOB_RETAIN_TIME	---
SJC$_LAST_PAGE	SJC$_NO_LAST_PAGE
SJC$_LOG_DELETE	SJC$_NO_LOG_DELETE
SJC$_LOG_QUEUE	---
SJC$_LOG_SPECIFICATION	SJC$_NO_LOG_SPECIFICATION
SJC$_LOG_SPOOL	SJC$_NO_LOG_SPOOL
SJC$_LOWERCASE	SJC$_NO_LOWERCASE
SJC$_NOTE	SJC$_NO_NOTE
SJC$_NOTIFY	SJC$_NO_NOTIFY
SJC$_OPERATOR_REQUEST	SJC$_NO_OPERATOR_REQUEST
SJC$_PAGE_HEADER	SJC$_NO_PAGE_HEADER
SJC$_PAGINATE	SJC$_NO_PAGINATE
SJC$_PARAMETER_1 through 8	SJC$_NO_PARAMETERS
SJC$_PASSALL	SJC$_NO_PASSALL
SJC$_PRIORITY	---
SJC$_RESTART	SJC$_NO_RESTART
SJC$_UIC	---
SJC$_USERNAME	---
SJC$_WSDEFAULT	SJC$_NO_WSDEFAULT
SJC$_WSEXTENT	SJC$_NO_WSEXTENT
SJC$_WSQUOTA	SJC$_NO_WSQUOTA

SJC$_ALIGNMENT_MASK	---
SJC$_ALIGNMENT_PAGES	---
SJC$_AUTOSTART_ON	---
SJC$_BASE_PRIORITY	---
SJC$_BATCH	SJC$_NO_BATCH
SJC$_CHARACTERISTIC_NAME	SJC$_NO_CHARACTERISTICS
SJC$_CHARACTERISTIC_NUMBER	---
SJC$_CLOSE_QUEUE	---
SJC$_CPU_DEFAULT	SJC$_NO_CPU_DEFAULT
SJC$_CPU_LIMIT	SJC$_NO_CPU_LIMIT
SJC$_DEFAULT_FORM_NAME	---
SJC$_DEFAULT_FORM_NUMBER	---
SJC$_DEVICE_NAME	---
SJC$_FILE_BURST	SJC$_NO_FILE_BURST
SJC$_FILE_BURST_ONE	---
SJC$_FILE_FLAG	SJC$_NO_FILE_FLAG
SJC$_FILE_FLAG_ONE	---
SJC$_FILE_TRAILER	SJC$_NO_FILE_TRAILER
SJC$_FILE_TRAILER_ONE	---
SJC$_FORM_NAME	---
SJC$_FORM_NUMBER	---
SJC$_GENERIC_QUEUE	SJC$_NO_GENERIC_QUEUE
SJC$_GENERIC_SELECTION	SJC$_NO_GENERIC_SELECTION
SJC$_GENERIC_TARGET	---
SJC$_JOB_BURST	SJC$_NO_JOB_BURST
SJC$_JOB_FLAG	SJC$_NO_JOB_FLAG
SJC$_JOB_LIMIT	---
SJC$_JOB_RESET_MODULES	SJC$_NO_JOB_RESET_MODULES
SJC$_JOB_SIZE_MAXIMUM	SJC$_NO_JOB_SIZE_MAXIMUM
SJC$_JOB_SIZE_MINIMUM	SJC$_NO_JOB_SIZE_MINIMUM
SJC$_JOB_SIZE_SCHEDULING	SJC$_NO_JOB_SIZE_SCHEDULING
SJC$_JOB_TRAILER	SJC$_NO_JOB_TRAILER
SJC$_LIBRARY_SPECIFICATION	SJC$_NO_LIBRARY_SPECIFICATION
SJC$_NEXT_JOB	---
SJC$_OPEN_QUEUE	---
SJC$_OWNER_UIC	---
SJC$_PAGINATE	SJC$_NO_PAGINATE
SJC$_PROCESSOR	SJC$_NO_PROCESSOR
SJC$_PROTECTION	---
SJC$_QUEUE_DESCRIPTION	SJC$_NO_QUEUE_DESCRIPTION
SJC$_RECORD_BLOCKING	SJC$_NO_RECORD_BLOCKING
SJC$_RELATIVE_PAGE	---
SJC$_RETAIN_ALL_JOBS	SJC$_NO_RETAIN_JOBS
SJC$_RETAIN_ERROR_JOBS	---
SJC$_SCSNODE_NAME	---
SJC$_SEARCH_STRING	---
SJC$_SWAP	SJC$_NO_SWAP
SJC$_TERMINAL	SJC$_NO_TERMINAL
SJC$_TOP_OF_FILE	---
SJC$_WSDEFAULT	SJC$_NO_WSDEFAULT
SJC$_WSEXTENT	SJC$_NO_WSEXTENT
SJC$_WSQUOTA	SJC$_NO_WSQUOTA

Accounting-Record Type	Corresponding System Event
SJC$V_ACCT_IMAGE	Image terminations
SJC$V_ACCT_LOGIN_FAILURE	Login failures
SJC$V_ACCT_MESSAGE	User messages sent
SJC$V_ACCT_PRINT	Print job terminations
SJC$V_ACCT_PROCESS	Process terminations