OpenVMS System Services Reference Manual

Previous | Contents

This service accepts 64-bit addresses.

Format

$SIGNAL_ARRAY_64 mcharg, sigarg_64

C Prototype

int sys$signal_array_64 (unsigned __int64 mcharg, unsigned __int64 sigarg_64);

ARGUMENTS

mcharg

OpenVMS usage: mechanism array

type: vector quadword (unsigned)

access: read only

mechanism: by 32- or 64-bit reference, array reference

The mechanism array. The mcharg argument is the 32- or 64-bit address of this array, which was passed to the condition handler. $SIGNAL_ARRAY_64 uses this structure to determine the 64-bit signal array address.
sigarg_64

OpenVMS usage: 64-bit signal array

type: vector quadword (unsigned)

access: write only

mechanism: by 32- or 64-bit reference, array reference

The 32- or 64-bit address of the 64-bit signal array is returned in this argument.

DESCRIPTION

$SIGNAL_ARRAY_64 provides the address of the 64-bit version of the signal array for condition handlers that need it. It is normally needed only by applications that use 64-bit address space and want to handle errors involving addresses in that region.
For example, if an access violation occurs on a 64-bit address, the 32-bit signal array passed to the handler will contain only the low 32 bits of the effective address, since each entry is a longword. The 64-bit signal array, which can be obtained using this service, contains quadword entries, so the 64-bit address can be fully expressed.
Required Access or Privileges

None
Required Quota

None
Related Services

$PUTMSG, which accepts either a 32-bit or 64-bit signal array as an argument.

Condition Values Returned

SS$_NORMAL The service completed succesfully.

SS$_ACCVIO The sigarg_64 argument cannot be written.

SS$_BADPARAM The mcharg argument is not a mechanism array in the expected format.

$SNDERR

Writes a user-specified message to the system error log file, preceding it with the date and time.

Format

SYS$SNDERR msgbuf

C Prototype

int sys$snderr (void *msgbuf);

ARGUMENT

msgbuf

OpenVMS usage: char_string

type: character-coded text string

access: read only

mechanism: by descriptor--fixed-length string descriptor

Message to be written to the error log file. The msgbuf argument is the address of a character string descriptor pointing to the message text.

DESCRIPTION

The Send Message to Error Logger service writes a user-specified message to the system error log file, preceding it with the date and time. The $SNDERR service requires system dynamic memory.
Required Access or Privileges

To send a message to the error log file, the calling process must have BUGCHK privilege.
Required Quota

None
Related Services

$ALLOC, $ASSIGN, $BRKTHRU, $BRKTHRUW, $CANCEL, $CREMBX, $DALLOC, $DASSGN, $DELMBX, $DEVICE_SCAN, $DISMOU, $GETDVI, $GETDVIW, $GETMSG, $GETQUI, $GETQUIW, $INIT_VOL, $MOUNT, $PUTMSG, $QIO, $QIOW, $SNDJBC, $SNDJBCW, $SNDOPR

Condition Values Returned

SS$_NORMAL The service completed successfully.

SS$_ACCVIO The message buffer or buffer descriptor cannot be read by the caller.

SS$_INSFMEM The system dynamic memory is insufficient for completing the service.

SS$_NOPRIV The process does not have the required BUGCHK privilege.

$SNDJBC

Creates, stops, and manages queues and the batch and print jobs in those queues. The $SNDJBC service completes asynchronously; to synchronize the completion of most operations, use the Send to Job Controller and Wait ($SNDJBCW) service.

Format

SYS$SNDJBC [efn] ,func [,nullarg] [,itmlst] [,iosb] [,astadr] [,astprm]

C Prototype

int sys$sndjbc (unsigned int efn, unsigned short int func, unsigned int nullarg, void *itmlst, struct _iosb *iosb, void (*astadr)(__unknown_params), int astprm);

ARGUMENTS

efn

OpenVMS usage: ef_number

type: longword (unsigned)

access: read only

mechanism: by value

Number of the event flag to be set when $SNDJBC completes. The efn argument is a longword containing this number; however, $SNDJBC uses only the low-order byte.
When you queue the request, $SNDJBC clears the specified event flag (or event flag 0 if efn was not specified). Then, when the operation completes, $SNDJBC sets the specified event flag (or event flag 0).
func

OpenVMS usage: function_code

type: word (unsigned)

access: read only

mechanism: by value

Function code specifying the function that $SNDJBC is to perform. The func argument is a word containing this function code. The $SJCDEF macro defines the names of each function code.
You can specify only one function code in a single call to $SNDJBC. Most function codes require or allow for additional information to be passed in the call. You pass this information by using the itmlst argument, which specifies a list of one or more item descriptors. Each item descriptor in turn specifies an item code, which modifies, restricts, or otherwise affects the action designated by the function code.
nullarg

OpenVMS usage: null_arg

type: longword (unsigned)

access: read only

mechanism: by value

Placeholding argument reserved to Digital.

itmlst

OpenVMS usage: item_list_3

type: longword (unsigned)

access: read only

mechanism: by reference

Item list supplying information to be used in performing the function specified by the func argument. The itmlst argument is the address of the item list. The item list consists of one or more item descriptors, each of which specifies an item code. The item list is terminated by an item code of 0 or by a longword of 0. The following diagram depicts the structure of a single item descriptor.

The following table defines the item descriptor fields.

Descriptor Field Definition

Buffer length A word specifying the length of the buffer; the buffer either supplies information to be used by $SNDJBC or receives information from $SNDJBC. The required length of the buffer varies, depending on the item code specified, and is given in the description of each item code.

Item code A word containing an item code, which identifies the nature of the information supplied for use by $SNDJBC or received from $SNDJBC. Each item code has a symbolic name. The $SJCDEF macro defines these symbol names.

Buffer address A longword containing the address of the buffer that specifies or receives the information.

Return length address A longword containing the address of a word to receive the length (in bytes) of information returned by $SNDJBC. If you specify this address as 0, no length is returned.

The item codes' symbolic names have the following format:
SJC$_code 
There are three types of item code:

Boolean item code. Boolean item codes specify a true or false value: the form SJC$_code specifies a true value; SJC$_NO_code specifies a false value. The default value for the Boolean item codes is false. For all Boolean item codes, the buffer length, buffer address, and return length fields of the item descriptor must be 0.
Input value item code. Input value item codes specify an input value to be used by $SNDJBC. The buffer length and buffer address fields of the item descriptor must be nonzero; the return length field must be 0. Specific buffer length requirements are given in the description of each item code.
Output value item code. Output value item codes specify a buffer for information returned by $SNDJBC. The buffer length and buffer address fields of the item descriptor must be nonzero; the return length field can be 0 or nonzero. Specific buffer length requirements are given in the description of each item code.

Several item codes specify a queue name, form name, or characteristic name. For these item codes, the buffer must specify a string containing from 1 to 31 characters, exclusive of spaces, tabs, and null characters, which are ignored. Allowable characters in the string are uppercase alphabetic characters, lowercase alphabetic characters (which are converted to uppercase), numeric characters, the dollar sign ($), and the underscore (_).
iosb

OpenVMS usage: io_status_block

type: quadword (unsigned)

access: write only

mechanism: by reference

I/O status block into which $SNDJBC writes the completion status after the requested operation has completed. The iosb argument is the address of the I/O status block.
At request initiation, $SNDJBC sets the value of the quadword I/O status block to 0. When the requested operation completes, $SNDJBC writes a condition value in the first longword of the I/O status block. It writes the value 0 into the second longword; this longword is unused and reserved for future use.
The condition values returned by $SNDJBC in the I/O status block are usually condition values from the JBC facility. These condition values are defined by the $JBCMSGDEF macro. In some cases, the condition value returned by $SNDJBC can be an error return from a system service or an OpenVMS RMS service that is used in executing the request. For the SJC$_SYNCHRONIZE_JOB request, the condition value returned is the completion status of the requested job.
The condition values returned from the JBC facility are listed in the Condition Values Returned in the I/O Status Block section.
Though this argument is optional, Digital strongly recommends that you specify it, for the following reasons:

If you are using an event flag to signal the completion of the service, you can test the I/O status block for a condition value to be sure that the event flag was not set by an event other than service completion.
If you are using the $SYNCH service to synchronize completion of the service, the I/O status block is a required argument for $SYNCH.
The condition value returned in R0 and the condition value returned in the I/O status block provide information about different aspects of the call to the $SNDJBC service. The condition value returned in R0 gives you information about the success or failure of the service call itself; the condition value returned in the I/O status block gives you information about the success or failure of the service operation. Therefore, to accurately assess the success or failure of the call to $SNDJBC, you must check the condition values returned in both R0 and the I/O status block.

astadr

OpenVMS usage: ast_procedure

type: procedure value

access: call without stack unwinding

mechanism: by reference

AST service routine to be executed when $SNDJBC completes. The astadr argument is the address of this routine.
If specified, the AST routine executes at the same access mode as the caller of $SNDJBC.
astprm

OpenVMS usage: user_arg

type: longword (unsigned)

access: read only

mechanism: by value

AST parameter to be passed to the AST service routine specified by the astadr argument. The astprm argument is this longword parameter.

Descriptor Field	Definition
Buffer length	A word specifying the length of the buffer; the buffer either supplies information to be used by $SNDJBC or receives information from $SNDJBC. The required length of the buffer varies, depending on the item code specified, and is given in the description of each item code.
Item code	A word containing an item code, which identifies the nature of the information supplied for use by $SNDJBC or received from $SNDJBC. Each item code has a symbolic name. The $SJCDEF macro defines these symbol names.
Buffer address	A longword containing the address of the buffer that specifies or receives the information.
Return length address	A longword containing the address of a word to receive the length (in bytes) of information returned by $SNDJBC. If you specify this address as 0, no length is returned.

Function Codes This section describes the various function codes that are applicable to the $SNDJBC system service.

SJC$_ABORT_JOB
This request aborts the execution of the current job from an output execution queue or the job you specified from a batch queue. By default, the job is deleted. However, for a restartable job, you can requeue it to the same queue or to another queue.
You must specify one of the following input value item codes:

SJC$_ENTRY_NUMBER
SJC$_QUEUE

You must specify the following input value item code for batch jobs:

SJC$_ENTRY_NUMBER

You can specify the following optional input value or Boolean item codes:

SJC$_DESTINATION_QUEUE ---

SJC$_HOLD SJC$_NO_HOLD

SJC$_PRIORITY ---

SJC$_REQUEUE ---

SJC$_ADD_FILE
This request adds a file to the open job owned by the requesting process. You use this operation as part of a sequence of calls to the $SNDJBC service to create a job with one or more files. The first call in the sequence specifies the SJC$_CREATE_JOB operation to create an open job. Each subsequent SJC$_ADD_FILE request associates an additional file with the job. Finally, you make an SJC$_CLOSE_JOB request to complete the batch or print job specification. To create a job that contains only one file, you can make a single call to $SNDJBC that specifies the SJC$_ENTER_FILE function code.
You must specify one of the following input value item codes:

SJC$_FILE_IDENTIFICATION
SJC$_FILE_SPECIFICATION

You can specify the following input value or Boolean item codes:

SJC$_DELETE_FILE SJC$_NO_DELETE_FILE

SJC$_DOUBLE_SPACE SJC$_NO_DOUBLE_SPACE

SJC$_FILE_BURST SJC$_NO_FILE_BURST

SJC$_FILE_COPIES ---

SJC$_FILE_FLAG SJC$_NO_FILE_FLAG

SJC$_FILE_SETUP_MODULES SJC$_NO_FILE_SETUP_MODULES

SJC$_FILE_TRAILER SJC$_NO_FILE_TRAILER

SJC$_FIRST_PAGE SJC$_NO_FIRST_PAGE

SJC$_LAST_PAGE SJC$_NO_LAST_PAGE

SJC$_PAGE_HEADER SJC$_NO_PAGE_HEADER

SJC$_PAGINATE SJC$_NO_PAGINATE

SJC$_PASSALL SJC$_NO_PASSALL

SJC$_ALTER_JOB
This request alters the parameters of an existing job that is not currently executing.
You must specify the following input value item code:

SJC$_ENTRY_NUMBER

You can specify the following input value or Boolean item codes:

SJC$_AFTER_TIME SJC$_NO_AFTER_TIME

SJC$_CHARACTERISTIC_NAME SJC$_NO_CHARACTERISTICS

SJC$_CHARACTERISTIC_NUMBER ---

--- SJC$_NO_CHECKPOINT_DATA

SJC$_CLI SJC$_NO_CLI

SJC$_CPU_LIMIT SJC$_NO_CPU_LIMIT

--- SJC$_NO_DELETE_FILE

SJC$_DESTINATION_QUEUE ---

SJC$_DOUBLE_SPACE SJC$_NO_DOUBLE_SPACE

SJC$_FILE_BURST SJC$_NO_FILE_BURST

SJC$_FILE_COPIES ---

SJC$_FILE_FLAG SJC$_NO_FILE_FLAG

SJC$_FILE_SETUP_MODULES SJC$_NO_FILE_SETUP_MODULES

SJC$_FILE_TRAILER SJC$_NO_FILE_TRAILER

SJC$_FIRST_PAGE SJC$_NO_FIRST_PAGE

SJC$_FORM_NAME ---

SJC$_FORM_NUMBER ---

SJC$_HOLD SJC$_NO_HOLD

SJC$_JOB_COPIES ---

SJC$_JOB_DEFAULT_RETAIN ---

SJC$_JOB_ERROR_RETAIN ---

SJC$_JOB_NAME ---

SJC$_JOB_RETAIN ---

SJC$_JOB_RETAIN_TIME ---

SJC$_LAST_PAGE SJC$_NO_LAST_PAGE

SJC$_LOG_DELETE SJC$_NO_LOG_DELETE

SJC$_LOG_QUEUE ---

SJC$_LOG_SPECIFICATION SJC$_NO_LOG_SPECIFICATION

SJC$_LOG_SPOOL SJC$_NO_LOG_SPOOL

SJC$_LOWERCASE SJC$_NO_LOWERCASE

SJC$_NOTE SJC$_NO_NOTE

SJC$_NOTIFY SJC$_NO_NOTIFY

SJC$_OPERATOR_REQUEST SJC$_NO_OPERATOR_REQUEST

SJC$_PAGE_HEADER SJC$_NO_PAGE_HEADER

SJC$_PAGINATE SJC$_NO_PAGINATE

SJC$_PARAMETER_1 through 8 SJC$_NO_PARAMETERS

SJC$_PASSALL SJC$_NO_PASSALL

SJC$_PRIORITY ---

SJC$_QUEUE ---

SJC$_RESTART SJC$_NO_RESTART

SJC$_WSDEFAULT SJC$_NO_WSDEFAULT

SJC$_WSEXTENT SJC$_NO_WSEXTENT

SJC$_WSQUOTA SJC$_NO_WSQUOTA

If you specify the SJC$_QUEUE item code, the $SNDJBC service verifies that the selected job entry exists on the specified queue before modifying the job.
SJC$_ALTER_QUEUE
This request alters the parameters of a queue. The execution of current jobs is unaffected.
You must specify the following input value item code:

SJC$_QUEUE

You can specify the following input value or Boolean item codes:

SJC$_BASE_PRIORITY ---

SJC$_CHARACTERISTIC_NAME SJC$_NO_CHARACTERISTICS

SJC$_CHARACTERISTIC_NUMBER ---

SJC$_CLOSE_QUEUE ---

SJC$_CPU_DEFAULT SJC$_NO_CPU_DEFAULT

SJC$_CPU_LIMIT SJC$_NO_CPU_LIMIT

SJC$_DEFAULT_FORM_NAME ---

SJC$_DEFAULT_FORM_NUMBER ---

SJC$_FILE_BURST SJC$_NO_FILE_BURST

SJC$_FILE_BURST_ONE ---

SJC$_FILE_FLAG SJC$_NO_FILE_FLAG

SJC$_FILE_FLAG_ONE ---

SJC$_FILE_TRAILER SJC$_NO_FILE_TRAILER

SJC$_FILE_TRAILER_ONE ---

SJC$_FORM_NAME ---

SJC$_FORM_NUMBER ---

SJC$_GENERIC_SELECTION SJC$_NO_GENERIC_SELECTION

SJC$_JOB_BURST SJC$_NO_JOB_BURST

SJC$_JOB_FLAG SJC$_NO_JOB_FLAG

SJC$_JOB_LIMIT ---

SJC$_JOB_RESET_MODULES SJC$_NO_JOB_RESET_MODULES

SJC$_JOB_SIZE_MAXIMUM SJC$_NO_JOB_SIZE_MAXIMUM

SJC$_JOB_SIZE_MINIMUM SJC$_NO_JOB_SIZE_MINIMUM

SJC$_JOB_SIZE_SCHEDULING SJC$_NO_JOB_SIZE_SCHEDULING

SJC$_JOB_TRAILER SJC$_NO_JOB_TRAILER

SJC$_OPEN_QUEUE ---

SJC$_OWNER_UIC ---

SJC$_PAGINATE SJC$_NO_PAGINATE

SJC$_PROTECTION ---

SJC$_QUEUE_DESCRIPTION SJC$_NO_QUEUE_DESCRIPTION

SJC$_RECORD_BLOCKING SJC$_NO_RECORD_BLOCKING

SJC$_RETAIN_ALL_JOBS SJC$_NO_RETAIN_JOBS

SJC$_RETAIN_ERROR_JOBS ---

SJC$_SWAP SJC$_NO_SWAP

SJC$_WSDEFAULT SJC$_NO_WSDEFAULT

SJC$_WSEXTENT SJC$_NO_WSEXTENT

SJC$_WSQUOTA SJC$_NO_WSQUOTA

SJC$_ASSIGN_QUEUE
This request assigns a logical queue to an execution queue. The SJC$_QUEUE item code specifies the logical queue; the SJC$_DESTINATION_QUEUE item code specifies the execution queue.
You must specify the following input value item codes:

SJC$_DESTINATION_QUEUE
SJC$_QUEUE

SJC$_BATCH_CHECKPOINT
This request establishes a checkpoint in a batch job. No operation is performed if the requesting process is not a batch process.
You must specify the following input value item code:

SJC$_CHECKPOINT_DATA

SJC$_CLOSE_DELETE
This request deletes the open job owned by the requesting process. No item codes are allowed.
SJC$_CLOSE_JOB
This request completes the specification of the open job owned by the requesting process and places the job in the queue specified in the SJC$_CREATE_JOB request that opened the job. If the SJC$_CLOSE_JOB request completes successfully, the job is no longer an open job; it becomes a normal batch or print job.
You can specify the following output value item code:

SJC$_JOB_STATUS_OUTPUT

SJC$_CREATE_JOB
This request creates an open job for the requesting process. If the process already owns an open job, that job is deleted.
An open job is a batch or print job that has not yet been completely specified. After you make the SJC$_CREATE_JOB request to open the job, you can make subsequent calls to $SNDJBC using the SJC$_ADD_FILE function code to specify the files associated with the job. Finally, you can complete the job specification with an SJC$_CLOSE_JOB request. If the SJC$_CREATE_JOB operation completes successfully, the open job created is given an entry number; the job is not assigned to the queue specified in the SJC$_CREATE_JOB operation until the SJC$_CLOSE_JOB request completes successfully.
You must specify the following input value item code:

SJC$_QUEUE

You can specify the following input value or Boolean item codes:

SJC$_ACCOUNT_NAME ---

SJC$_AFTER_TIME SJC$_NO_AFTER_TIME

SJC$_CHARACTERISTIC_NAME SJC$_NO_CHARACTERISTICS

SJC$_CHARACTERISTIC_NUMBER ---

SJC$_CLI SJC$_NO_CLI

SJC$_CPU_LIMIT SJC$_NO_CPU_LIMIT

SJC$_FILE_BURST SJC$_NO_FILE_BURST

SJC$_FILE_BURST_ONE ---

SJC$_FILE_FLAG SJC$_NO_FILE_FLAG

SJC$_FILE_FLAG_ONE ---

SJC$_FILE_TRAILER SJC$_NO_FILE_TRAILER

SJC$_FILE_TRAILER_ONE ---

SJC$_FIRST_PAGE SJC$_NO_FIRST_PAGE

SJC$_FORM_NAME ---

SJC$_FORM_NUMBER ---

SJC$_HOLD SJC$_NO_HOLD

SJC$_JOB_COPIES ---

SJC$_JOB_DEFAULT_RETAIN ---

SJC$_JOB_ERROR_RETAIN ---

SJC$_JOB_NAME ---

SJC$_JOB_RETAIN ---

SJC$_JOB_RETAIN_TIME ---

SJC$_LAST_PAGE SJC$_NO_LAST_PAGE

SJC$_LOG_DELETE SJC$_NO_LOG_DELETE

SJC$_LOG_QUEUE ---

SJC$_LOG_SPECIFICATION SJC$_NO_LOG_SPECIFICATION

SJC$_LOG_SPOOL SJC$_NO_LOG_SPOOL

SJC$_LOWERCASE SJC$_NO_LOWERCASE

SJC$_NOTE SJC$_NO_NOTE

SJC$_NOTIFY SJC$_NO_NOTIFY

SJC$_OPERATOR_REQUEST SJC$_NO_OPERATOR_REQUEST

SJC$_PARAMETER_1 through 8 SJC$_NO_PARAMETERS

SJC$_PRIORITY ---

SJC$_RESTART SJC$_NO_RESTART

SJC$_UIC ---

SJC$_USERNAME ---

SJC$_WSDEFAULT SJC$_NO_WSDEFAULT

SJC$_WSEXTENT SJC$_NO_WSEXTENT

SJC$_WSQUOTA SJC$_NO_WSQUOTA

Previous | Next | Contents | [Home] | [Comments] | [Ordering info] | [Help]
  4527P071.HTM
  OSSG Documentation
  22-NOV-1996 13:00:38.67
Copyright © Digital Equipment Corporation 1996. All Rights Reserved.

Legal

OpenVMS usage:	mechanism array
type:	vector quadword (unsigned)
access:	read only
mechanism:	by 32- or 64-bit reference, array reference

OpenVMS usage:	64-bit signal array
type:	vector quadword (unsigned)
access:	write only
mechanism:	by 32- or 64-bit reference, array reference

SS$_NORMAL	The service completed succesfully.
SS$_ACCVIO	The sigarg_64 argument cannot be written.
SS$_BADPARAM	The mcharg argument is not a mechanism array in the expected format.

OpenVMS usage:	char_string
type:	character-coded text string
access:	read only
mechanism:	by descriptor--fixed-length string descriptor

SS$_NORMAL	The service completed successfully.
SS$_ACCVIO	The message buffer or buffer descriptor cannot be read by the caller.
SS$_INSFMEM	The system dynamic memory is insufficient for completing the service.
SS$_NOPRIV	The process does not have the required BUGCHK privilege.

OpenVMS usage:	ef_number
type:	longword (unsigned)
access:	read only
mechanism:	by value

OpenVMS usage:	function_code
type:	word (unsigned)
access:	read only
mechanism:	by value

OpenVMS usage:	null_arg
type:	longword (unsigned)
access:	read only
mechanism:	by value

OpenVMS usage:	item_list_3
type:	longword (unsigned)
access:	read only
mechanism:	by reference

OpenVMS usage:	io_status_block
type:	quadword (unsigned)
access:	write only
mechanism:	by reference

OpenVMS usage:	ast_procedure
type:	procedure value
access:	call without stack unwinding
mechanism:	by reference

OpenVMS usage:	user_arg
type:	longword (unsigned)
access:	read only
mechanism:	by value

SJC$_DESTINATION_QUEUE	---
SJC$_HOLD	SJC$_NO_HOLD
SJC$_PRIORITY	---
SJC$_REQUEUE	---

SJC$_DELETE_FILE	SJC$_NO_DELETE_FILE
SJC$_DOUBLE_SPACE	SJC$_NO_DOUBLE_SPACE
SJC$_FILE_BURST	SJC$_NO_FILE_BURST
SJC$_FILE_COPIES	---
SJC$_FILE_FLAG	SJC$_NO_FILE_FLAG
SJC$_FILE_SETUP_MODULES	SJC$_NO_FILE_SETUP_MODULES
SJC$_FILE_TRAILER	SJC$_NO_FILE_TRAILER
SJC$_FIRST_PAGE	SJC$_NO_FIRST_PAGE
SJC$_LAST_PAGE	SJC$_NO_LAST_PAGE
SJC$_PAGE_HEADER	SJC$_NO_PAGE_HEADER
SJC$_PAGINATE	SJC$_NO_PAGINATE
SJC$_PASSALL	SJC$_NO_PASSALL

SJC$_AFTER_TIME	SJC$_NO_AFTER_TIME
SJC$_CHARACTERISTIC_NAME	SJC$_NO_CHARACTERISTICS
SJC$_CHARACTERISTIC_NUMBER	---
---	SJC$_NO_CHECKPOINT_DATA
SJC$_CLI	SJC$_NO_CLI
SJC$_CPU_LIMIT	SJC$_NO_CPU_LIMIT
---	SJC$_NO_DELETE_FILE
SJC$_DESTINATION_QUEUE	---
SJC$_DOUBLE_SPACE	SJC$_NO_DOUBLE_SPACE
SJC$_FILE_BURST	SJC$_NO_FILE_BURST
SJC$_FILE_COPIES	---
SJC$_FILE_FLAG	SJC$_NO_FILE_FLAG
SJC$_FILE_SETUP_MODULES	SJC$_NO_FILE_SETUP_MODULES
SJC$_FILE_TRAILER	SJC$_NO_FILE_TRAILER
SJC$_FIRST_PAGE	SJC$_NO_FIRST_PAGE
SJC$_FORM_NAME	---
SJC$_FORM_NUMBER	---
SJC$_HOLD	SJC$_NO_HOLD
SJC$_JOB_COPIES	---
SJC$_JOB_DEFAULT_RETAIN	---
SJC$_JOB_ERROR_RETAIN	---
SJC$_JOB_NAME	---
SJC$_JOB_RETAIN	---
SJC$_JOB_RETAIN_TIME	---
SJC$_LAST_PAGE	SJC$_NO_LAST_PAGE
SJC$_LOG_DELETE	SJC$_NO_LOG_DELETE
SJC$_LOG_QUEUE	---
SJC$_LOG_SPECIFICATION	SJC$_NO_LOG_SPECIFICATION
SJC$_LOG_SPOOL	SJC$_NO_LOG_SPOOL
SJC$_LOWERCASE	SJC$_NO_LOWERCASE
SJC$_NOTE	SJC$_NO_NOTE
SJC$_NOTIFY	SJC$_NO_NOTIFY
SJC$_OPERATOR_REQUEST	SJC$_NO_OPERATOR_REQUEST
SJC$_PAGE_HEADER	SJC$_NO_PAGE_HEADER
SJC$_PAGINATE	SJC$_NO_PAGINATE
SJC$_PARAMETER_1 through 8	SJC$_NO_PARAMETERS
SJC$_PASSALL	SJC$_NO_PASSALL
SJC$_PRIORITY	---
SJC$_QUEUE	---
SJC$_RESTART	SJC$_NO_RESTART
SJC$_WSDEFAULT	SJC$_NO_WSDEFAULT
SJC$_WSEXTENT	SJC$_NO_WSEXTENT
SJC$_WSQUOTA	SJC$_NO_WSQUOTA

SJC$_BASE_PRIORITY	---
SJC$_CHARACTERISTIC_NAME	SJC$_NO_CHARACTERISTICS
SJC$_CHARACTERISTIC_NUMBER	---
SJC$_CLOSE_QUEUE	---
SJC$_CPU_DEFAULT	SJC$_NO_CPU_DEFAULT
SJC$_CPU_LIMIT	SJC$_NO_CPU_LIMIT
SJC$_DEFAULT_FORM_NAME	---
SJC$_DEFAULT_FORM_NUMBER	---
SJC$_FILE_BURST	SJC$_NO_FILE_BURST
SJC$_FILE_BURST_ONE	---
SJC$_FILE_FLAG	SJC$_NO_FILE_FLAG
SJC$_FILE_FLAG_ONE	---
SJC$_FILE_TRAILER	SJC$_NO_FILE_TRAILER
SJC$_FILE_TRAILER_ONE	---
SJC$_FORM_NAME	---
SJC$_FORM_NUMBER	---
SJC$_GENERIC_SELECTION	SJC$_NO_GENERIC_SELECTION
SJC$_JOB_BURST	SJC$_NO_JOB_BURST
SJC$_JOB_FLAG	SJC$_NO_JOB_FLAG
SJC$_JOB_LIMIT	---
SJC$_JOB_RESET_MODULES	SJC$_NO_JOB_RESET_MODULES
SJC$_JOB_SIZE_MAXIMUM	SJC$_NO_JOB_SIZE_MAXIMUM
SJC$_JOB_SIZE_MINIMUM	SJC$_NO_JOB_SIZE_MINIMUM
SJC$_JOB_SIZE_SCHEDULING	SJC$_NO_JOB_SIZE_SCHEDULING
SJC$_JOB_TRAILER	SJC$_NO_JOB_TRAILER
SJC$_OPEN_QUEUE	---
SJC$_OWNER_UIC	---
SJC$_PAGINATE	SJC$_NO_PAGINATE
SJC$_PROTECTION	---
SJC$_QUEUE_DESCRIPTION	SJC$_NO_QUEUE_DESCRIPTION
SJC$_RECORD_BLOCKING	SJC$_NO_RECORD_BLOCKING
SJC$_RETAIN_ALL_JOBS	SJC$_NO_RETAIN_JOBS
SJC$_RETAIN_ERROR_JOBS	---
SJC$_SWAP	SJC$_NO_SWAP
SJC$_WSDEFAULT	SJC$_NO_WSDEFAULT
SJC$_WSEXTENT	SJC$_NO_WSEXTENT
SJC$_WSQUOTA	SJC$_NO_WSQUOTA

SJC$_ACCOUNT_NAME	---
SJC$_AFTER_TIME	SJC$_NO_AFTER_TIME
SJC$_CHARACTERISTIC_NAME	SJC$_NO_CHARACTERISTICS
SJC$_CHARACTERISTIC_NUMBER	---
SJC$_CLI	SJC$_NO_CLI
SJC$_CPU_LIMIT	SJC$_NO_CPU_LIMIT
SJC$_FILE_BURST	SJC$_NO_FILE_BURST
SJC$_FILE_BURST_ONE	---
SJC$_FILE_FLAG	SJC$_NO_FILE_FLAG
SJC$_FILE_FLAG_ONE	---
SJC$_FILE_TRAILER	SJC$_NO_FILE_TRAILER
SJC$_FILE_TRAILER_ONE	---
SJC$_FIRST_PAGE	SJC$_NO_FIRST_PAGE
SJC$_FORM_NAME	---
SJC$_FORM_NUMBER	---
SJC$_HOLD	SJC$_NO_HOLD
SJC$_JOB_COPIES	---
SJC$_JOB_DEFAULT_RETAIN	---
SJC$_JOB_ERROR_RETAIN	---
SJC$_JOB_NAME	---
SJC$_JOB_RETAIN	---
SJC$_JOB_RETAIN_TIME	---
SJC$_LAST_PAGE	SJC$_NO_LAST_PAGE
SJC$_LOG_DELETE	SJC$_NO_LOG_DELETE
SJC$_LOG_QUEUE	---
SJC$_LOG_SPECIFICATION	SJC$_NO_LOG_SPECIFICATION
SJC$_LOG_SPOOL	SJC$_NO_LOG_SPOOL
SJC$_LOWERCASE	SJC$_NO_LOWERCASE
SJC$_NOTE	SJC$_NO_NOTE
SJC$_NOTIFY	SJC$_NO_NOTIFY
SJC$_OPERATOR_REQUEST	SJC$_NO_OPERATOR_REQUEST
SJC$_PARAMETER_1 through 8	SJC$_NO_PARAMETERS
SJC$_PRIORITY	---
SJC$_RESTART	SJC$_NO_RESTART
SJC$_UIC	---
SJC$_USERNAME	---
SJC$_WSDEFAULT	SJC$_NO_WSDEFAULT
SJC$_WSEXTENT	SJC$_NO_WSEXTENT
SJC$_WSQUOTA	SJC$_NO_WSQUOTA