[HR]

DECnet-Plus for OpenVMS
Applications Installation and Advanced Configuration

Previous | Contents

P

Passive association
Phase IV
Phase IV addressing
- enabling on routing circuits
PHONE account
- configuring
Port
- terminal
Privilege
- required for VAX P.S.I. CTP
Protocol
- autodial

Q

Quitting
- from VAX P.S.I. configuration program
Quota
- required for VAX P.S.I. CTP

R

Reachable address
- configuring
- configuring for CLNS
- prefix
  - configuring
Reconfiguration
- devices
Registering a node
- resolving problems
retransmit threshold characteristic
- CLNS
- CONS
RFC 1006
RFC 1006 Extension
- configuring
- running DECnet applications over IP backbone
RFC 1859
- using
Router
Routing
- circuit characteristics
  - CLNS
- segregated mode
Routing circuits
- configuring
- enabling Phase IV addressing
Routing information
- specifying
Routing module #1
Routing module #2
- reachable address
Routing priority
- specifying
Routing protocol
- configuring
RPOA sequence number
- VAX P.S.I.
Running the configuration program
- VAX P.S.I.
  - privileges required

S

Scripts
- creating for site-specific search path
Search path
- configuring
- creating site-specific script
- displaying information
- modifying information
- naming template support
- primary name service
- secondary name service
- setting up naming templates
- using to ease migration
Segregated mode routing
Selection weight
- configuring
set command
- modem connect line #1
- modem connect line #2
- nsp
- osi transport #1
- osi transport #2
- osi transport application
- osi transport template for CLNS
- osi transport template for CONS
- routing CIRCUIT for CLNS
- routing, for CLNS
- x25 access filter for CLNS
- x25 access filter for CONS
- x25 access template for CLNS
- x25 access template for CONS
set host/dte command
- using over the network
set terminal command
- using over the network
Starting
- FTAM
- OSAKserver
- VAX P.S.I. configuration program
Startup script
- net$startup #1
- net$startup #2
Static asynchronous connection
- establishing automatically
- establishing manually #1
- establishing manually #2
- procedure for establishing
- reasons for failure
- terminating
Stopping
- FTAM
- OSAKserver
- VT
Switching of terminal line
- automatic
- DCL set terminal command
- manual
- to a DECnet line
Synchronous line
- communications port
SYS$LIBRARY:DNS$NS_DEF_FILE.DAT
SYSGEN utility
- autoconfigure all command
SYSMAN IO AUTO command
systartup_vms.com command procedure #1
systartup_vms.com command procedure #2
System
- configuring a namespace
- configuring a node name
- configuring a node synonym
- non VMS system connected asynchronously to OpenVMS system
System manager
- establishing static asynchronous connection
System time
- configuring
- configuring local
- configuring system
  - as UTC
  - using established rules
- configuring UTC as local

T

TCP/IP
- running DECnet and OSI applications over IP backbone
TDF
Telephone line
- dialup
template entity
- in OSI transport module
  - creating #1
  - creating #2
- in X.25 access module
Terminal
Terminal emulator
Terminal line
- asynchronous
Terminating
- dynamic asynchronous link
Testing
- VAX P.S.I.
Time
- configuring
- configuring local
- configuring system
  - as UTC
  - using established rules
- configuring UTC as local
Time differential factor
- See TDF
Time zone

TP0

configuring

TP2

configuring

TP4

configuring

Transport

Transport protocol classes

configuring

TSAP

Type of network service

TZR

U

User-defined NCL scripts
user name characteristic
- network applications
UTC
- definition
- relationship to GMT

V

Valid characters
- for namespace nickname
VAX P.S.I.
- accessing systems
  - security
- application #1
- application #2
  - command file #1
  - command file #2
  - filters
  - incoming calls to
  - name
  - security
  - type
  - user name #1
  - user name #2
  - X.25
  - X.29
- BCUG
- call characteristics
- call data
- call data mask
- call data value
- called address extension
  - mask
  - value
- called NSAP
  - filters
- calling address extension
- channel number
  - PVCs
- character-mode
  - terminals
- charging information
- client filters
- configuration
  - information required for
  - information you need to supply
  - planning
- configuration program
  - description
- configuration program
  - entering information
  - exiting from
- configuration program
  - horizontal scrolling
  - insert mode
- configuration program
  - keys used in
- configuration program
  - main menu
- configuration program
  - optional sections
- configuration program
  - overstrike mode
  - quitting from
  - reviewing information
  - scrolling, horizontal
  - sections #1
  - sections #2
  - sections #3
  - sections required for
- Configuration Test Procedure
  - See VAX P.S.I.
    - CTP
- configuring
  - access systems
  - multihost systems
  - native systems
- CTP
  - as a network object #1
  - as a network object #2
  - preparations
  - privileges required
  - quotas required
  - Receive Only mode
  - running interactively #1
  - running interactively #2
  - Send/Receive mode
  - testing to remote system
- CUG #1
- CUG #2
  - number
- declaring a network process #1
- declaring a network process #2
- declaring a network process #3
- destination DTE address
  - templates
- device
- DTE address
  - LLC2
- DTE class
  - filters
  - Remote
  - remote #1
  - remote #2
  - templates
- DTE name
  - LLC2
  - PVCs
- DTE status
  - Checking
- dynamic filters
  - name
- end-to-end delay
- expedited data
- extended frame sequence numbering
- extended packet sequence numbering
- fast select
- filter #1
- filter #2
  - application
  - call data mask
  - call data value
  - called address extension mask
  - called address extension value
  - called NSAP
  - DTE class
  - dynamic #1
  - dynamic #2
  - group
  - incoming DTE address
  - network processes
  - originally called address
  - priority #1
  - priority #2
  - receiving DTE address
  - redirect reason
  - sending DTE address
  - static #1
  - static #2
  - subaddress range
  - unspecified parameters
- flow control
  - negotiation
- gateway clients
  - nodes
  - security
  - systems
- group #1
- group #2
- group #3
  - filters
  - name
  - remote DTE address
  - type
- help
  - general
  - leaving
  - on specific fields
- incoming DTE address
- incoming security
  - applications #1
  - applications #2
  - Gateway Clients
  - gateway clients
- LAN device
- licenses
- line speed
- lines and DTEs #1
- lines and DTEs #2
- lines and DTEs #3
- LLC2 #1
- LLC2 #2
- LLC2 #3
  - DTEs
- local facilities
- local processes
  - security
- local subaddress
- logical channel
  - LLC2
- LSAP
  - local
  - remote
- Mail #1
- Mail #2
  - OpenVMS
  - P.S.I.
- NCL
  - scripts #1
  - scripts #2
  - scripts #3
  - scripts #4
    - failure to create
- negotiation
  - flow control
- network process #1
- network process #2
- network process #3
- network process #4
  - filters
  - security
- network user identity
- NSAP mapping
- options menu
  - Add
  - adding information
  - changing information
  - Continue
  - Delete
  - go to sections menu
  - Modify
  - sections menu
- originally called address
- outgoing security
  - accessing systems
  - Client Systems
  - local processes #1
  - local processes #2
- P.S.I. Mail
- packet size
  - LLC2
  - PVCs
  - templates
- profile
- psi$configure.com
- psi$configure.com #1
- psi$configure.com #2
- PSI$CTP
- PSI$CTP_ADD_NETOBJ
- PSI$CTP_REM_NETOBJ
- PVC #1
- PVC #2
- PVC #3
  - channel number
  - DTE name
  - name
  - packet size
  - security #1
  - security #2
  - window size
- $QIO(IO$_ACPCONTROL)
- quality of service
- RAP #1
- RAP #2
- RAP #3
- RAP #4
- RAP #5
- receiving DTE address
- redirect reason
- Remote Address Prefix
  - See RAP
- remote DTE
  - class #1
  - class #2
  - class #3
- remote MAC address
- reverse charging
- RPOA sequence number
- running the Configuration program
  - privileges required
- sections in the configuration program
- security
  - incoming, applications #1
  - incoming, applications #2
  - incoming, Gateway Clients
  - incoming, gateway clients
  - network processes
  - outgoing, accessing systems
  - outgoing, Client systems
  - outgoing, local processes #1
  - outgoing, local processes #2
  - PVCs #1
  - PVCs #2
- see X.25
- selected group
- sending DTE address
- static filters #1
- static filters #2
- subaddress
  - range
- SVC
- target address extension
- template #1
- template #2
- template #3
  - call data
  - calling address extension
  - charging information
  - `Default'
  - destination DTE address
  - DTE class
  - end-to-end delay
  - expedited data
  - fast select
  - local facilities
  - local subaddress
  - network user identity
  - NSAP mapping
  - packet size
  - quality of service
  - reverse charging
  - RPOA sequence number
  - selected group
  - target address extension
  - throughput class request
  - transit delay selection
  - window size
- testing
- throughput class request
- transit delay selection
- types of system
- window size
  - LLC2
  - packet level
  - PVCs
  - templates
- X.25 applications
- X.29 applications
- X.29 support #1
- X.29 support #2
- X.29 support #3
Virtual terminal
- using
VMScluster performance monitor
- See VPM
VOTS
- communicating with
VPM account
- configuring
VT
- stopping

Previous | Next | Contents | [Home] | [Comments] | [Ordering info] | [Help]

[HR]

  PROFILE_INDEX_002.HTML
  OSSG Documentation
   2-DEC-1996 12:33:53.23

Copyright © Digital Equipment Corporation 1996. All Rights Reserved.