RSX/IAS SIG Tape Distribution - Spring 1987
===========================================
This is the RSX/IAS SIG Symposium Tape from the Spring 1987 DECUS
Symposium at Nashville. The tape contains material submitted by the
user community for the tape at that meeting.
The programs on this tape are from user submissions. The DECUS
staff, the RSX & IAS SIG staffs, and DEC are all in complete ignorance
of the contents of the tapes. No warranty of any kind is implied in
the distribution of these tapes. The programs may or may not be well
documented, they may or may not work, they may even crash your system.
If you have a problem with the contents of the tape, contact the
author of the program. Do not contact DECUS, DEC, or the RSX or IAS
SIGs.
The tape contains about 3660 files requiring 59,000 blocks of
disk space. Since this will fit on a single 2400 foot tape only in
BRU at 1600 bpi, it is being distributed as such. To simplify
distribution and production, the tape is a single BRU container file
followed (for the LUG distribution only) by several extra files.
Directory [300,1] contains the files documenting the contents of
the tape. The following files are present:
RSX87ATPE.DOC contains an abstract of the contents of the tape by UIC.
ALLREADME.87A contains a concatenated list of all the README files on
the tape.
RSX87ADIR.LIS contains a directory of all the files on the tape (BRU
does not produce nice directories). This is a brief listing with
UICs and filenames only for space reasons.
SUBMIT.DOC contains guidelines for submissions to the RSX/IAS Sig Tape
collection. This is MUST reading for everyone who desires to
submit a program to the SIG tape.
BEGIN87A.DOC has a copy of this text.
UICSET87A.CMD contains the UFD commands to create all the needed UIC's
on a device whose name is asked for in the command file. Edit it
to match your needs before using BRU to extract the tape contents.
A word of caution: under at least some circumstances, 11M V4.0
BRU's /UFD switch creates directories even when it doesn't put
anything in them.
If your disk is smaller than an RM03, you may want to exclude some
files from the copy in order to have a backup set that fits on a
smaller disk. Copy these off in separate passes. Directories
[5,*], [120,*], and [356,*] between them contain about 10,000
blocks and they may be pulled off in a separate pass. If these are
omitted, the rest of tape will fit on an RK07. A second pass
through the tape can extract the other directories onto another
device.
Glenn C. Everhart
RSX/IAS SIG Tape Copy Coordinator
RCA AD Technology, Bldg. 206-1
_
Rt. 38
Cherry Hill, N.J. 08358
(609)-486-6328
Everhart%Arisia.decnet@GE-CRD.arpa
***********************************************
[005,004]README.DOC
***********************************************
To: DECUS "C" Users From: Jim Conroy X2346
Dept: Automation Tools and
Technology - U2N27
Date: 4/21/87
cc: Subj: Modifications to
DECUS "C" Compiler
We recently had a need to segment a very large program into instruc-
tion and data space. We encountered some problems in the compiler and
libraries which we were able to fix. All programs that were changed
are listed below and are included on this tape in the UICs listed be-
low. Only programs that were modified are included with this submis-
sion.
The new "C" compiler, assembler and runtime libraries support I and D
space. It was built from the DECUS Fall '85 RSX SIG tape (11-SP-90).
Added to it were the Australian submissions for split I and D space
from the Spring '86 tape (11-SP-92). The Australian changes can be
found in UICs [272,34], [272,35], and [272,37] on that tape. Only the
changes for I and D space were used. The double-precision arithmetic
changes were not included. The merging of these two tapes has re-
sulted in the use of these UICs:
1. [5,4] - compiler and assembler modules.
2. [5,15] and [5,16] - C.OLB library routines.
3. [5,24] - CX.OLB library routines.
The resultant compiling system did not work well and we were forced to
modify several programs. Specific changes to each program are listed
in the edit history at the beginning of the program. The programs
changed were:
[5,4]CC200.MAC [5,24]APCSV.MAC [5,16]IOV.MAC
[5,15]C5TA.MAC [5,24]GMCR.MAC [5,16]KBIN.MAC
[5,15]ASCR50.MAC [5,24]SETFNB.MAC [5,16]KBINR.MAC
[5,15]CALLER.MAC [5,24]TLOG.MAC [5,16]MEMDMP.MAC
[5,15]CALLTR.MAC [5,16]SUPORT.MAC [5,16]PRMT.MAC
[5,15]CTIME.MAC [5,16]ABORT.MAC [5,16]PROFIL.MAC
[5,15]LOCALT.MAC [5,16]ATOD.MAC [5,16]RTIME.MAC
[5,15]LTOA.MAC [5,16]ATOF.MAC [5,16]SCREEN.MAC
[5,15]MALINK.MAC [5,16]DOPRNT.MAC [5,16]SETCC.MAC
[5,15]MALLOC.MAC [5,16]DOSCAN.MAC [5,16]SLEEP.MAC
[5,15]MAMCHK.MAC [5,16]DTOA.MAC [5,16]TIME.MAC
[5,15]NARG.MAC [5,16]ERROR.MAC [5,16]TRAPS.MAC
[5,15]PCSV.MAC [5,16]EXIT.MAC [5,16]PERROR.MAC
[5,15]RAND.MAC [5,16]FWILD.MAC [5,16]IOPUT.MAC
[5,15]RCTIME.MAC [5,16]IOCSI.MAC [5,16]PUTCHA.MAC
[5,15]UNWIND.MAC [5,16]IOFOPA.MAC [5,16]FOPEN.MAC
[5,15]ITOAX.MAC [5,16]IOGET.MAC [5,16]DTOAD.MAC
[5,15]CTYPE.MAC [5,16]IOGETC.MAC [5,16]INIT.MAC
[5,15]IOGETC.MAC [5,16]IOFOPT.MAC [5,16]IOFLSH.MAC
[5,16]DOUTAB.MAC [5,16]UTIME.MAC
[5,16]ATOFD.MAC [5,16]ATODD.MAC
The changes to these programs can be summarized as follows:
1. Change the compiler(CC200.MAC) to use a default psect type of
d(data) on psects C$DATA and C$MWCN.
2. Change library routines to use psect types of d on C$DATA and
C$MWCN psects.
3. Move data from C$STRN to C$DATA since data is loaded at even
addresses and string variables are concatenated at the next
byte address. This eliminates odd address traps.
4. Fix MALLOC. The Get Partition Parameters ESR in INIT.MAC was
returning the total length of the task(I-space plus D-space)
rather than the length of D-space only. This set up variable
$$MEND incorrectly for MALLOC.
With these changes, you can use instruction APRs by compiling and
task-building in the normal way. Use of instruction and data APRs is
turned on by the /ID switch on the task-build. The compiler has been
used at three UNISYS sites for about four months with no major
problems. These changes come with the standard DECUS warranty.
James M. Conroy
Mail Station U2N27
UNISYS Corporation
P.O. Box 64525
St. Paul, Mn. 55164-0525
Phone: (612)456-2346
***********************************************
[005,015]README.1ST
**********************************************
This UIC is part of the "C" compiling system update for I and D space.
The complete set of UICs include:
1. [5,4] - A complete description of this submission as well as
a change to the compiler.
2. [5,15] - Changes to c.olb library routines.
3. [5,16] - Changes to c.olb library routines.
4. [5,24] - Changes tp cx.olb library routines.
***********************************************
[005,016]README.1ST
**********************************************
This UIC is part of the "C" compiling system update for I and D space.
The complete set of UICs include:
1. [5,4] - A complete description of this submission as well as
a change to the compiler.
2. [5,15] - Changes to c.olb library routines.
3. [5,16] - Changes to c.olb library routines.
4. [5,24] - Changes to cx.olb library routines.
***********************************************
[005,024]README.1ST
**********************************************
This UIC is part of the "C" compiling system update for I and D space.
The complete set of UICs include:
1. [5,4] - A complete description of this submission as well as
a change to the compiler.
2. [5,15] - Changes to c.olb library routines.
3. [5,16] - Changes to c.olb library routines.
4. [5,24] - Changes tp cx.olb library routines.
***********************************************
[070,122]README.1ST
**********************************************
This area contains an 8086 cross assembler and linker, originally
distributed by the old Pascal SIG. Full sources are provided.
***********************************************
[120,001]README.1ST
**********************************************
This area contains an area code list, a spelling checker in C, and
a calendar routine from the S87 RT11 tape.
***********************************************
[120,003]README.1ST
**********************************************
The following files are included in this release of GKS V0.20 for
RT-11.
DEMO.F77 ! Demo program. F77 Source.
DEMO.LNK ! Command file to link DEMO.
DEMO.OBJ ! DEMO object file. Compiled with F77.
DEMO.SAV ! Executable version of demo program. Requires FPU.
DRIVER.MAC ! Table of pointers to device drivers.
DRIVER.OBJ ! ... (object file of the above)
DRVUTL.OBJ ! Driver utility functions.
DRVV50.MAC ! Visual 550 device driver source code.
DRVV50.OBJ ! Visual 550 device driver object code.
DRV407.MAC ! Tek 4107 device driver source code.
DRV407.OBJ ! Tek 4107 device driver object code.
DRV745.MAC ! HP 7475 device driver source code.
DRV745.OBJ ! HP 7475 device driver object code.
GKENUM.FIN ! GKS Enumeration Data Type definition file.
GKS.DOC ! User document and reference manual.
GKS.OBJ ! GKS object library.
GKSDEF.INC ! Definitions used by this implementation.
READ.ME ! This file.
RELEAS.DOC ! Release notes.
UTL.MLB ! Utility macro library (used by drivers).
***********************************************
[120,004]README.1ST
**********************************************
This area contains a set of RUNOFF macros for formatting a thesis.
***********************************************
[200,020]README.TXT
**********************************************
A STAGE2 macroprocessor, complete with its test data, and a copy of
SIMCMP used in its implementation.
ref: Waite. Implementing software for Non-Numerical Applications.
***********************************************
[264,002]README.1ST
**********************************************
This area has a 3D plot package. Low level outputs are for Calcomp
but can be changed to other devices. Portable to VMS rather easily.
Major docs are in German; from DECUS Amsterdam (1981) tape.
***********************************************
[270,001]README.1ST
**********************************************
MRMLIB - GENERAL DOCUMENTATION.
INTRODUCTION.
"MRMLIB" is a personal collection of subprograms which can
be called by fortran programs and which can also be written in
FORTRAN. The principal aim in setting up this library has been
to establish a reasonably portable set of subprograms which carry
out operations that would otherwise be continually rewritten, thus
many of the routines in this library perform simple (even trivial)
tasks. Two strong secondary aims are to establish a standard
set of interfaces which are inherently more portable than the
routines, and to establish proven subprograms for non trivial
operations particularly in the numerical area.
No guarantee as to the correctness or efficiency of any
routine can be given but generally the routines will have been
used to a degree that should allow some confidence in them.
THE LIBRARY IS MAINTAINED BY:
DR MARTIN. R. MANNING
INSTITUTE OF NUCLEAR SCIENCES
LOWER HUTT
NEW ZEALAND.
It is freely available to anyone who is interested and comments,
certifications, complaints and particularly constructive
criticisms will be welcomed.
THE "BASE" FOR THE LIBRARY CONSISTS OF
1. GENERAL DOCUMENTATION (THIS DOCUMENT).
2. A CATALOGUE OF ALL CURRENT SUBPROGRAMS.
3. FORTRAN IV SOURCES FOR ALL ROUTINES.
IN ADDITION TO THIS "BASE" THERE WILL BE
4. ASSEMBLY LANGUAGE VERSIONS OF SOME ROUTINES FOR
SOME SYSTEMS.
5. CATALOGUES OF THOSE ROUTINES AVAILABLE IN
A GIVEN SYSTEM LIBRARY. THIS MAY CONTAIN OTHER
ROUTINES NOT IN "MRMLIB" AS WELL.
6. SPECIAL REPORTS ON ORIGINAL ALGORITHMS ETC.
AND AS DOCUMENTATION OF MANY ALGORITHMS WILL CONTAIN REFERENCES TO
THE GENERAL PUBLISHED LITERATURE, THE FULL DOCUMENTATION OF
"MRMLIB" IS BACKED UP BY STANDARD JOURNALS, REPORTS ETC.
The base for "mrmlib" as described above is all kept on
computer readable media and will be accessible through standard
support programs such as editors etc. on several systems. In
addition special programs may be made available to allow easy
user access to sources and documentation. To aid this aspect
of "mrmlib" the documentation files (including source files ) are
formatted in such a way as to facilitate context editing etc.
#GENERAL DOCUMENTATION.
This document is intended to describe the general
features of the library and standard conventions for some
groups of subprograms. The subprograms are often conveniently
grouped into "packages" for this purpose and a set of conventions
given for the package. These may include such things as common
blocks, regular features of parameter lists, data storage
conventions etc.
***********************************************
[277,001]README.1ST
**********************************************
README.1ST
This document describes the software which was outlined in
Peter Bendall's Paper read at the Decus Muenchen Symposium
held at Esslingen, 26-28 March 1980.
The Programmes were written or modified at the Hamburg Outs-
tation of the European Molecular Biology Laboratory and were
originally student work. They have been slightly modified
by Peter Bendall to eliminate the most glaring bugs.....
The Source code is supplied for use or modification, by per-
mission of:
European Molecular Biology Laboratory
Notkestr. 85
2000 Hamburg 52
West Germany
The programmes supplied are provided WITHOUT GUARANTEE,
and the European Molecular Biology Lab is
UNABLE TO PROVIDE ANY SUPPORT for this software.
These versions are only applicable to FORTRAN-IV-PLUS V2.51
running under RSX11M V3.1 on a mapped System. It is assumed
that they will run under later versions. Because INTEGER*4
has been used to hold various values modification for FOR
TRAN-IV may not be very easy.
ASS68
This is a simple 2 pass Assembler which produces a Moto-
rola "S1" formatted load module and a listing. Standard
Motorola Mnemonics are employed and the known limita-
tions include:
- There May only be one value for an FCB or FDB statement
- The * format meaning "present APC Value" does not work
- The line-numbers are counted, not the actual number of
lines in a page, so that a page with several FCC state-
ments may run off the physical page.
- Only the shortened version of register commands are ac-
cepted, e.g. LDAA and not LDA A.
- ASCII strings can only be entered in the form
<delimiter> text <delimiter>
and not in the nH<text> format.
- ??
ASS85
This is an even simpler two pass assembler which uses
the standard Intel Mnemonics for Instructions, but uses
a non standard set of Pseudo Operators since it was mod-
ified from a version which used 8008 type mnemonics as
described in the book "8080 Cookbook" written by Scelbi
in USA. The Assembler produces an Intel "Hex" load mo-
dule and a listing. File types default to .BIN and .SRC
. Known bugs include:
- There may only be one value for DB (use .VAL) and DW
(use .DBL) Pseudo Ops.
- The line numbers are counted, not the actual number of
lines in a page, so that a page containing several .ASC
commands will run off the physical page.
There are only 4 characters in the symbol table represen-
tation of each symbol and these are the first three and
the LAST character of the user symbol. If you assemble
a published program, (e.g. Palo Alto Tiny BASIC) you
may find several conflicts.
- Non Alphabetic characters may be accepted in Symbolic
names, but if the first character is non alphabetic, the
symbol will not appear in the sorted version of the sym-
bol table. This also applies to the pseudo-label ".END"
that is inserted in the symbol table to indicate the
next free address after the current APC value.
***********************************************
[300,017]README.1ST
**********************************************
[300,17] FLECS - FORTRAN LANGUAGE PREPROCESSOR
FLECS is a FORTRAN preprocessor written by Terry Beyer at
the University of Oregon. It supports a number of language
extentions not found in FORTRAN. These include
WHEN-THEN-ELSE constructs, conditional statement selection,
REPEAT-WHILE and REPEAT-UNTIL, expanded DO and IF state-
ments, local subroutine invocations and a number of other
statements. It requires about 28KW of task space for exe-
cution, but could be made smaller through overlays. Due to
the untiring efforts of Dick Michaud and Larry Simpson we
now have the entire FLECS manual in RUNOFF format !!!
OPERATING SYS : RSX11D/IAS,?RSX11M?
HARDWARE REQ'D: -
SOFTWARE FORM : FORTRAN SOURCE, MACRO SOURCE, COMMAND FILES
DOC. FORMAT : RUNOFF - ALSO SEE FLECS.TXT
VERSION NUMBER: - DATE ENTERED: 17-FEB-77
LAST REVISION : 22-APR-78
CONTACT : LIBRARIAN
***********************************************
[300,024]README.1ST
**********************************************
[300,24] XREF - FORTRAN CROSS-REFERENCE PROGRAM
XREF is a FORTRAN program with MACRO-11 subroutines which will
cross reference variables in FORTRAN programs. Input is a FORTRAN
source program, and output is a cross reference
by statement and line number of all user symbols.
VERSION NUMBER: - DATE ENTERED: 30-MAR-77
CONTACT : R. MILES - DIGITAL EQUIPMENT, ROLLING MEADOWS
***********************************************
[300,047]README.1ST
**********************************************
This area contains the files nessasary to intercept illegal
instructions. The area contains a paper, and design spec
etc
***********************************************
[300,051]README.1ST
**********************************************
FERMILAB research services source and document control
These command files, datatrieve definitions and procedures, and others, are the
facilities that we have been using for a major project. These files are still
under development. So is the documentation (currently, there is no
documentation)
The "GSR" prefixed files are the files that generate the standard type of
documents. These documents have entries made in a datatrieve database. The
database and utilities help document management.
The "SLM" and "SLU" files are for the source management routines.
The others are source generation files.
Play with these as you wish. Next DECUS, the documentation should exist and the
rough corners knocked off.
Daniel B. Curtis
some of the files are:
1. DOCINSGEN.CMD generates docins task which addes documents to the
library
2. DOCLIST .CMD sample document listing command file
3. DTRDIRLST.CMD dtr command file for listing macreplacement documents
4. DTRDLIST .CMD called by doclist to make dtr.cmd
5. GENLISTS .CMD another dtr command file
6. GENSRC .CMD generate source files/modules (pascal, fortran, macro,
etc
7. GSRDSASK .CMD design spec questions
8. GSRDSGEN .CMD design spec generation
9. GSRGENDOC.CMD main document generation file
10. GSRGROUP .CMD document group questions
11. GSRINCDOC.CMD increment document number
12. GSRMEMASK.CMD memo questions
13. GSRMEMGEN.CMD memo generation
14. GSRNUM1 .CMD number generation file for project 1
15. GSRTECGEN.CMD technical note generation
16. LIBDLALL .CMD dtr procedure to display documents
17. LIBDLDIS .CMD dtr procedure to display documents but different
18. LIBDOMDEF.CMD dtr document library domain definitions
19. LIBDTRDIC.CMD dtr command file
20. LIBGENALL.CMD dtr file to generate domains,procedures etc for doc
library
21. LIBGENLST.CMD dtr procedure to generate document index
22. LIBLSTALL.CMD dtr ditto
23. LIBLSTCUR.CMD dtr ditto
24. LIBLSTDIS.CMD dtr ditto
25. LIBLSTDOC.CMD dtr ditto
26. LIBLSTGRP.CMD dtr ditto
27. LIBLSTNUM.CMD dtr ditto
28. LIBLSTSTA.CMD dtr ditto
29. LIBRECDEF.CMD dtr library record deffinition
30. SCONF1 .CMD macro source configerator
31. SCONF2 .CMD fortram source configerator
32. SCONF3 .CMD pascal source confingerator
33. SCONF4 .CMD Z80 source configerator
34. SCONF5 .CMD praxis source configeratior
35. SDATA .CMD for source data type modules ( not well thought out )
36. SDEF1 .CMD macro definition
37. SDEF2 .CMD fortran definition
38. SDEF3 .CMD pascal deffinition
39. SDEF4 .CMD z80 definitions
40. SDEF5 .CMD prasix definitions
41. SLMDOMDEF.CMD source library managenent domain deffinition
42. SLMEXTMOD.CMD dtr slm extract module
43. SLMGENALL.CMD dtr slm generate dictionary
44. SLMHISDEF.CMD dtr slm history record deffinition
45. SLMINIDEF.CMD dtr slm initalization
46. SLMMODDEF.CMD dtr slm module record deffinition
47. SLMPRODEF.CMD dtr slm procedure deffinition
48. SLMREPMOD.CMD dtr slm replace module procedure
49. SLMRINDEF.CMD dtr slm raw data input from obj library listing
50. SLUCKNAM .CMD slm command file to check name
51. SLUDTRPRE.CMD slm command file to extract source modules and update
database
52. SLUEXTRL .CMD slm command file that actually extracts modules
53. SLUREPL .CMD slm command file that replaces module in libraries
54. SLUUICCK .CMD slm command file to check uic and name match
55. INSRTDOC .MAC macro program to insert documents in the document
library database
56. SAVRG .MAC
57. EDOC .TEC mung edoc to edit documents
58. ESRC .TEC mung esrc to edit sources
59. FORMAC .TEC
60. FORTEC .TEC
61. LOWINS .TEC
62. RNOFIX .TEC
63. TECO .TEC
64. DOCS1 .TRC
65. DOCS2 .TRC
***********************************************
[300,052]README.1ST
**********************************************
These routines were designed to allow a FORTRAN program to
get access to the assembly language macros which interface
to FCS. It is assumed the user is familiar with the
IAS/RSX-11 I/O OPERATIONS REFERENCE MANUAL. The user should
read this manual carefully. The user should also pay attention
to the appendix in the back of the manual which details the
contents of the file descriptor block (FDB).
In using these subroutines the user allocates a 128 byte
array in his Fortran program to hold the FDB. The subroutines
use this array as their FDB when calling the FCS macros.
Thus the FORTRAN programmer has complete access to every
parameter that FCS keeps in the file descriptor block.
The FCS macros also return a value to a two word i/o status block.
The "INIT" subroutine modifies the F.BKST field in the FDB so that
the address of the i/o status block points to bytes 124-128 of
the FDB array. Thus the FORTRAN porgrammer can examine bytes 124-128
of the FDB to see what FCS places in the i/o status block after
each i/o operation.
The user should pay particular attention to the following
locations in the FDB.
F.RTYP RECORD TYPE BYTE
F.RATT RECORD ATTRIBUTE BYTE
F.RSIZ RECORD SIZE BYTE
THE "HOW OPEN CODE" FIELD IS COMPOSED OF TWO BYTES, RACC AND FACC
THEY ARE FOUND IN THE FDB.
F.RACC RECORD ACCESS BYTE. BIT 0 THROUGH 3 OF THIS BYTE DEFINE
THE RECORD-ACCESS MODES.
BIT 0 =1 TO INDICATE READ$/WRITE$ MODE (FD.RWM); OTHERWISE
IT IS 0 TO INDICATE GET$/PUT$ MODE
BIT 1 = 1 TO INDICATE RANDOM-ACCESS MODE (FD.RAN) FOR GET$/PUT$
RECORD I/O; OTHERWISE, IT IS 0 TO INDICATE SEQUENTIAL ACCESS
MODE.
BIT 2 = 1 TO INDICATE LOACATE MODE (FD.PLC) FOR GET$/PUT$
RECORD I/O; OTHERWISE, IT IS 0 TO INDICATE MOVE MODE.
BIT 3 = 1 TO INDICATE THAT PUT$ OPERATION IN SEQUENTIAL MODE
DOES NOT TRUNCATE THE FIELD (FD.INS); OTHERWISE, IT IS 0
TO INDICATE THAT PUT$ OPERATION IN SEQUENTIAL MODE TRUNCATES
THE FILE.
F.FACC FILE-ACCESS BYTE. THIS BYTE INDICATES THE ACCESS PRIVILEGES
FOR A FILE.
BIT 0 = 1 IF THE FILE IS ACCESSED FOR READ ONLY (FA.RD).
BIT 1 = 1 IF THE FILE IS ACCESSED FOR WRITING (FA.WRT).
BIT 2 = 1 IF THE FILE IS ACCESSED FOR EXTENDING (FA.EXT).
BIT 3 = 1 IF A NEW FILE IS BEING CREATED (FA.CRE); OTHERWISE
IT IS 0 TO INDICATE AN EXISTING FILE.
BIT 4 =1 IF THE FILE IS A TEMPORARY FILE (FA.TMP).
BIT 5 = 1 IF THE FILE IS OPENED FOR SHARED ACCESS (FA.SHR).
IF BIT 3 ABOVE IS 0;
BIT 6 = 1 IF AN EXISTING FILE IS BEING APPENDED (FA.APD).
IF BIT 3 ABOVE IS 1;
BIT 6 = 1 IF NOT SUPERSEDING AN EXISTING FILE AT FILE-
CREATE TIME (FA.NSP).
RESPECTIVELY SUBMITTED
PHILIP H. CANNON
SCIENCE APPLICATIONS, INC.
SUITE 901
1211 W 22ND STREET
OAKBROOK, IL.
60521
(312)-655-5960
***********************************************
[300,062]README.1ST
**********************************************
SUMMARY OF THE MICHAEL REESE MEDICAL CENTER SUBMISSION
TO THE SPRING 80 DECUS MEETING
F. BORGER, MICHAEL REESE MEDICAL CENTER
CHICAGO, IL 60616, (312) 791-2515
[300,62]
ABSZAP .CMD;2 ONE-LINER ABSOLUTE CORE PATCH PROGRAM
ABSZAP .MAC;5
ATT .CMD;4 LISTS ATTRIBUTES OF FILE
ATT .MAC;1
CORZAP .CMD;4 ONE-LINER SCOM PATCH PROGRAM
CORZAP .MAC;1
DSKFIX .CMD;16 DISK ABSOLUTE BLOCK EXAMINATION/PATCHING PROGRAM
DSKFIX .MAC;50
DSKFIX .MAN;10
FHD .CMD;6 PROGRAM TO LIST FILE HEADER (INDEX FILE) FOR ANY FILE
FHD .MAC;106
LUT .CMD;6 LIST L(OGICAL) U(NIT) T(ABLE) OF RUNNING TASK
LUT .MAC;70
PAG .CMD;3 PRODUCE PAGEINATED LISTINGS OF SOURCE FILES
PAG .MAC;15
***********************************************
[300,300]README.1ST
**********************************************
; 4-FEB-76
; FOLLOWING IS A LISTING OF VARIOUS UTILITY ROUTINES
; CALLABLE BY FORTRAN MAIN PROGRAMS.
; ALL BUT THE FIRST ARE WRITTEN IN MACRO.
; LARRY SIMPSON
; DEPT. OF MEDICAL PHYSICS
; MICHAEL REESE MEDICAL CENTER
; CHICAGO, ILL. 60616
; (312) 791-2515
;
FLOPEN
; 'FOR' ROUTINE TO SOLICIT FILE NAME AND PREPARE FOR OPEN
;
STRCMP
; MACRO ROUTINE TO COMPARE STRINGS FOR EQUALITY
;
MOCNVT
; MACRO ROUTINE CONVERTS MONTH NUMBER TO ASCII AND VICE VERSA
;
STRCON
; MACRO ROUTINE TO CONCATENATE ANY NUMBER OF STRINGS
;
MAXINT
; MACRO ROUTINE TO FIND MAX OF AN INTEGER ARRAY
;
AMAXFA
; MACRO ROUTINE TO FIND MAX OF A FLOATING ARRAY
;
CHRCNT
; MACRO ROUTINE TO COUNT # OF GIVEN CHAR. IN ASCII ARRAY
;
FLINTP
; MACRO ROUTINE TO PERFORM FLOATING LINEAR INTERPOLATION
;
LNFILL
; MACRO ROUTINE TO FILL AN ASCII ARRAY WITH A GIVEN CHARACTER
;
TRNCAT
; MACRO ROUTINE TO GIVE POSITION OF LAST NON-BLANK CHAR IN ASCII ARRAY
;
LUNDLT
; MACRO ROUTINE TO DELETE AN OPEN FILE ON A GIVEN LUN
;
ATTDET
; MACRO ROUTINE TO ATTACH AND DETACH A DEVICE
***********************************************
[301,011]README.1ST
**********************************************
[301,011] SAN DIEGO 79 SELECT - FRTRN CALLABLE ROUTINE FOR KEYBD OPTION
SELECT REV. 790621.
Base level: Version CS1.18 Date: 06-21-79
Patch level: None Date:
Submitted by: Charles South
Hughes Research Labs
3011 Malibu Canyon Rd.
Malibu, CA 90265
phone:(213) 456-6411
Description: A FORTRAN callable MACRO routine to provide keyboard option
selection from a specified list of options. Defaults are provided for, as
is prompting, recognition & string completion via the ESCAPE key. At any
point in keyboard input, a question-mark will elicit all remaining selections
which are still not unique.
System reqts: Approx. 1.2K words for the subroutine. Has been run only on
RSX-11M, but no known restrictions to other RSX systems.
Documentation: A .DOC file, well-commented source code, and a FORTRAN test
program as an example.
Status: No known bugs. However, if the task using the subroutine is
checkpointed, then echoing of individual typed characters may be slow, or
characters may be lost if accidentally typing ahead.
Support: A currently actively used subroutine. The author welcomes
reports of any problems encountered in using the routine.
Current Release Change Summary (since last DECUS distribution):
CS1.18 CHANGED 6/21/79 TO (CAN YOU BELIEVE THIS?) FIX THE BUG THAT 1.17
TRIED AND FAILED TO FIX. ALSO TO "UNDO" THE DAMAGE THAT THE 1.17 FIX
DID. ONE OF THOSE HORROR STORIES...THOUGHT I HAD TESTED THE FIX AND
HADN'T (AN "@" SYMBOL WAS INSERTED IN THE WRONG LINE). MY APOLOGIES.
***********************************************
[301,012]README.1ST
**********************************************
[301,012] WHO - 11M TASK - LIST LOGGED-IN TT:'S W/ NAMES, TASKS - REV. 790416.
Base level: Version JKN3.0 Date: 23-AUG-78
Patch level: None Date:
Submitted by: Jim Neeland
Hughes Research Labs
3011 Malibu Canyon Rd.
Malibu, CA 90265
phone: (213) 456-6411
Description: Privileged task for RSX-11M to allow ALL users to determine
which terminals are currently logged in, what their login uic/name is, and what
active tasks currently have which TT: number as the task TI:. Thus for example
you can quickly see what tasks belong to whom and who is currently using
the print spooler. Also displays selected task states, shows active (not
stopped) tasks associated w/ CO:. Has built-in /HElp switch.
Output format (example):
>WHO /HE<cr>
Lists active tasks associated with CO: ([DETACHED]),
logged-in terminal #s, including any virtual terminals (VTnn:),
their login [UIC]/<NAME>, and tasks with that terminal as TI:
Task states are indicated with symbols in the following order:
/ = Checkpointed
? = Terminal input wait
* = I/O outstanding
# = Wait for event flag
sp= no special state flagged
CO0: [DETACHED],*NT....,*F11ACP
TT00: [377,377]
TT12:<$NEELAND> , ...WHO
TT13:<WSMITH> ,*...F4P,/...AT.
TT14:<EVELYN> ,?...MAC
TT17:<GUEST> , ...BAS
VT00:<VIRTUAL.TERM> ,*...PIP,#AT.V01
>
System reqts: Approx. 0.9K words in GEN partition when running. This
version requires the existence of the TERCOM database partition, and is
only useful with the programs which support TERCOM, namely slightly modified
versions of HELLO and BYE, and a small TLOGGR task which maintains the
database itself. Please see [301,25] for further information. The prior
version of WHO does not need TERCOM, but does not provide name information.
Documentation: Extensive source comments, WHO.DOC file, '/HElp switch.
Status: No known bugs. The following known limitations exist:
Designed for an 80-char line terminal. A maximum of 8 tasks will be listed
for any given TT:. The active tasks NOT associated with a LOGGED-IN TT:
will NOT be listed.
Desired enhancements: An additional switch to printout the login time
also contained in the TERCOM database.
Support: The author welcomes comments, suggestions, & complaints,
as this is an actively used utility, but doesn't guarantee to fix anything.
***********************************************
[301,016]README.1ST
**********************************************
[301,016] SSPLIB - MODIFIED IBM SCIENTIFIC SUBROUTINE PACKAGE FOR PDP-11
Base level: Version 01 Date: 26-NOV-77
Patch level: None Date:
Submitted by: Charles South (as received from Dr. Kaplan)
Hughes Research Labs
3011 Malibu Canyon Rd.
Malibu, CA 90265
(213) 456-6411
Description: This is approximately the IBM/360 Scientific Subroutine
Package (SSP), modified to run using F4P. It should be independent of
operating system (i.e. RSX-11M, D, or IAS). There is no guarantee that
the routines will compile as supplied using FOR, but they might. The
supplied OLB file is the result of compilation w/ F4P, version 2.50,
with the default switches of optimization and TR:BLOCKS.
System reqts: As compiled, requires FPP hardware (11/34,45,55,60,70).
Speed and space obviously vary greatly from one routine to another.
Documentation: None internally (including NO comments in source). For
description of subroutines see:
IBM System/360 Scientific Subroutine Package Programmer's Manual
Document # GH20-0205-4 (or more recent version, if one exists)
Status: No compilation errors. It is well known that for some
situations this library does not use the latest or best algorithms for
solving a given problem. However, it is widely used.
Desired enhancements: Further information on run characteristics on
PDP-11s, and/or further documentation on peculiarities of various subroutines.
Support: The librarian will endeavor to keep a file of reported
problems, fixes, etc., but this is a use-at-your-own-risk package.
***********************************************
[301,022]README.1ST
**********************************************
[301,022] UNIX TP TAPE EXTRACTOR FOR ASCII FILES
Base level: Version JRBARR.01 Date: 17-NOV-77
Patch level: None Date:
Submitted by: John R. Barr
Hughes Aircraft Co.
377/C209 Box 92919
Los Angeles, CA 90009
Phone: (213) 648-8295
Description: Reads ASCII file from UNIX TP formatted tape.
MCR>UTP OUTFILE.EXT=pathname
System reqts: PASCAL source code, runnable on RSX-11M & RSX-11D, maybe on
IAS.
Documentation: None.
Status: Mostly debugged.
Desired enhancements: Writing a UNIX tape.
Support: Unkown.
***********************************************
[301,026]README.TXT
**********************************************
Eric B. Levy
Computer Graphics Lab - 264/116
Jet Propulsion Laboratory
4800 Oak Grove Dr.
Pasadena, Calif. 91103
This is a modified version of the Conroy unix editor. This version
has some improvements and fixes the problem with no automatic backup
that this editor had.
The editor has some limitations:
1. it will not edit very large files - about 32k bytes and
2000 Lines maximum. However, a module (just finished) is
supplied called bedi03.mac will allow for 1.8 million byte
temp file and about 19,000 lines. Read the comments about
efficiency in the source. To build this version just make
a copy of the build files (ued.bld or ged.bld) and replace
the edi03.obj reference with bedi03.obj.
2. The various SRD programs floating around all seem to
give this editor the same hard time. That is, ued stores
lines internally as asciz (null terminated) and therefore
has problems handling text files that contain imbedded
nulls. Srd does this on the heading line (the one with the
** DDn:[uic] ... ) but only because the format buffer it
uses is not blanked initially. This can be fixed by changing
a .blkb n to the same amount of blanks. Notice that
this editor attempts to read all kinds of ascii files (even pip
listing files) and make sense out of them. I have doubts about
whether it handles Fortran Carriage control in all cases.
3. The line size may be adjusted in edi00.mac (its 140. bytes)
and in edi05.mac the label tsize is 132. (input/output tty
buffer). These can be adjusted if necessary. Note that gedio5
has 80. imbedded as the tty size; this is not too important
as the line size in edi00.mac is the one which determines
m^Aax chars STORED whereas (g)edi05.mac's tty size is just how much
it will print with the type-out/in qios. I parameterized edi05
but have not yet put that into gedio5.
***********************************************
[301,027]README.1ST
**********************************************
A FORTRAN CALLABLE SET OF MATRIX SUBROUTINES.
SEE [301,27]MATLIB.TXT AND MATLIB.DOC FOR MORE INFORMATION.
***********************************************
[301,033]README.1ST
**********************************************
[301,033] CHICAGO 80 CPA - CRASH POOL ANALYZER FOR RSX-11M 3.2
Base level: Version JN3.20 Date: 20-APR-80
Patch level: None Date:
Submitted by: Jim Neeland
Hughes Research Labs
3011 Malibu Canyon Rd.
Malibu, CA 90265
phone: (213) 456-6411
NOTE: Substantial thanks go to Wayne Graves for updating the 3.1 version
of OPA (nee POOLFL) to 3.2 and converting it to work on CDA files. This
version is my attempt to get the 2 programs into agreement. Due to time
constraints I haven't quite succeeded!
Description: Displays a visual map of the data structures in the pool
which existed at the time a CDA dump was taken. This is a companion
program to that in [301,31], the Online Pool Analyzer. The code is similar,
but here there is rather more checking, on the grounds that pool and other
internal data structures are not so likely to be valid. Use of a hard-copy
output and the version linked to ODT will give one a powerful tool to poke
through the crash.
System reqts: Approx. 24K for the task if linked to FCSRES. Note that
this task is not as clever as CDA, and needs to be taskbuilt with the
RSX11M.STB file which goes with the crashed system. It is not, however,
a privileged task.
Documentation: [301,31]OPA.DOC describes the output format,
and the source is well commented (I hope).
Status: This version is not quite up to that of OPA, in that it
doesn't handle the two-interrupt control block situation as well, and
does not track down active I/O packets. It should be a minor job to
copy the code from OPA, but I've just run out of time!
Desired enhancements: Code to find remaining data structures (described in
OPA.DOC). Implementation of the /HElp switch to explain the symbols used.
Support: The author welcomes comments & suggestions, including
decoding by others of further data structures or corrections to existing
code.
***********************************************
[301,050]README.1ST
**********************************************
This is the same Dungeon (A.K.A. "ZORK") that was distributed by
the DECUS library. When it was first distributed on the RSX/IAS SIG
tape at a DECUS symposium, the data files were eaten by FLX.
A problem that many installations have is that the data files
(DTEXT.BIN and DINDX.BIN) must be in the UIC of the person running Dungeon.
This could not be changed since the source files were not supplied (and never
will be). However, I have received permission from the Great Underground
Empire to release the source of the initialization subroutine which determines
the file names and UIC's.
The version which I have supplied in Source, Object, and Task (RSX-11M)
form looks for the data files in UIC [1,377]. If the .BIN files are present,
it will use them. If not, it will regenerate them from the .TXT file. These
files should be hidden from your users to avoid them getting clues from reading
the files (names like PLUGH.OBJ would be good). Just make sure that all users
have read access to the files so Dungeon can find them.
All but two of the modules are written in Fortran IV-PLUS, the two are
written in Macro. No Floating Point instructions are generated, so the FPP
unit is not needed.
Two taskbuild command files are provided: D.BLD is for systems that
have the F4P OTS imbedded in SYSLIB. E.BLD is for systems with a seperate
F4POTS.OLB. It is most important that Dungeon be built with the SHORT
error text module if it is not the default (this is done by explicitly
loading the module $SHORT from the library). This is to keep the size of
the task image within the 32K maximum. Also, if you do not have a
Floating Point Processor, you must explicitly specify the F4PEIS.OBJ file
if it is not already built into F4POTS or SYSLIB.
I recommend that you install it under the name of ...ZOR (for ZORK) to
be consistant with previous usage.
NOTE: DO ***NOT*** CONTACT ME ABOUT THE SOURCES FOR DUNGEON,
AS I DO NOT HAVE THEM AND CANNOT GET THEM. I will, however,
answer questions if you have trouble getting this up and running
on your system. I have not played the game, however, so do not
expect me to know anything beyond the installation procedures and
general RSX/IAS questions.
Alan E. Frisbie
Xerox Electro-Optical Systems
Mail Stop 351
300 N. Halstead
Pasadena, CA 91107
(213) 351-2351 (In panic situations only! I reserve the right to
be rude to anyone who bugs me when I am busy.)
***********************************************
[302,022]README.1ST
**********************************************
This UIC contains a version of CHESS that I found on
the RSTS tapes which started me believing that the division
of libraries between processors and then operating systems
was probably no longer appropriate. Anyway, the task file
was built under the RSX run time system under rsts and has
run fine on several real RSX systems for quite a while.
I think the source originated from RT11 (one TARLUG
memeber reports finding a copy hidden on DEC's maintenance
pack) and if you build it, it has a few error messages which
you can ignore as the code is never gotten to (according to
Gerry Mintz at the University of Toronto). Better yet maybe
someone can tidy it up and send it back.
Russ Brown
***********************************************
[302,106]README.1ST
**********************************************
Lunar lander and maze games for CRTs, in fortran with sources.
***********************************************
[302,205]README.1ST
**********************************************
The files in this UIC [302,205] are due to:
Ed Bolson
CVRTC RG-20
RR616 Health Science Building
University of Washington
Seattle, Washington 98195
Most are intended for IAS, although CSI should work for all RSX derived
systems.
A few caveats are in order, and are included in the short descriptions
of these programs below.
CSI is a FORTRAN callable implementation of DEC's command string
interpreter. Much effort has been expended to make the calls simple
and compatible with the original MACRO's. However, I believe the
assembly of CSI may give errors if the patch to the MACRO assembler
which fixes expansion of macros with generated symbols has not been
made. A version of the macro MOVARG which gets around this bug is
included in CONTROL.MLB.
The MAIL facility works as specified. Some users may wish to alter
the subroutine SETDEF, which sets the default file protection word,
to protect against read by all but the owner of [1,200]. This gives
security against all but the most capricious of system programmers or
the system manager (who can create a USER who owns [1,200]).
MAIL was written in FLECS, a structured FORTRAN pre-processor. The
FTN file is also included, and will compile with F4P. However, it
is nearly unreadable, so the FLECS listing file MAIL.FLL is also
included.
COST is being sent as is. No attempt was made to generalize it to
other charging procedures. However, the structure should be useful
and/or informative to system managers.
GET HAS BEEN FOUND TO BE VERY USEFUL, SINCE IT IMPLEMENTS A FEATURE
NOT AVAILABLE IN IAS, AND ALSO EXPANDS ON IT. MOST OF OUR USERS
IN ANY ONE GROUP NEED THE SAME PROGRAMS AVAILABLE. RATHER THAN
INSTALLING THEM OR REQUIRING A RUN COMMAND FROM A CENTRAL UIC,
GET RUNS A PROGRAM FROM THE UIC CREATED BY COPYING THE GROUP CODE
TO THE USER CODE: I.E. [300,300].
THE GET $FILE COMMAND RUNS PROGRAMS FROM [100,100], AND THE PROGRAM
COULD OF COURSE BE EXPANDED TO RECOGNIZE OTHER SPECIAL CHARACTERS.
***********************************************
[303,001]README.1ST
**********************************************
Running Colossal Programs on RSX/IAS
by O.K.Olmstead
Los Alamos Scientific Laboratory
Users wanting to run very large (100,000 FORTRAN source statements)
programs on RSX/IAS are faced with severe Task Builder (TKB) limitations.
The typical problem encountered is an overflow of symbol table space
indicated by the error message "NO VIRTUAL MEMORY STORAGE AVAILABLE".
If all of the hints in Appendix E of the Task Builder manual don't
help (e.g. use SLOTKB) then the user is forced to restructure his program
in less than an ideal way.
This area contains instructions for generating huge programs like this
and getting them to work under RSX11M.
***********************************************
[303,040]README.1ST
**********************************************
RSX mailbox handler. This one precedes the VMS handler of the same
name by several years but is useful for transfers task to task
without taking up task virtual address space.
***********************************************
[305,100]README.1ST
**********************************************
Modifications to RNO from CARTS
The following modifications may be made to the standard RUNOFF.
1. Change bar support.
This allows modified areas of text to be marked by a bar (|
ASCII code 174 octal) on the left hand side of the page.
2. .BLANK and .SKIP may use negative arguments.
This allows text to be moves some number of lines from the
end of the page.
3. A shift right switch /RI.
This switch allows text to be shifted right some number of
columns.
There is also build command files for RSX that allow mapping to shared
FCS.
The files for these modification are:
1. RNO.SLP -- applies the corrections to the RNO modules
2. Source correction files
1. CMTAB.COR -- CMTAB corrections
2. ERMAG.COR
3. FMTCOR.COR
4. PINDX.COR
5. RNCMD.COR
6. RNORSX.COR
7. RUNOFF.COR
3. RNODOC.COR -- RUNOFF.RNO corrections
4. RNOBLDFCS.CMD -- MAPS TO A SHARED FCSRES LIBRARY
5. RNOBLDFCS.ODL -- OVERLAYS FOR A SHARED FCSRES LIBRARY (you
may need to change this)
6. README.1ST -- This document
7. README.2ND -- The standard README.1ST document normally
distrubuted.
To install runoff:
1. read this document and the README.2ND document.
2. If you want the modifications listed above:
1. transfer the files to the UICs specified in README.2ND.
2. set the UIC to the source UIC
3. Run SLP with @RNO.SLP as input
3. Now follow the assembly and task build instructions in
README.2ND.
4. If you want to use the shared FCSRES library, use
"TKB @[1,24]RNOBLDFCS" instead of "TKB @[1,24]RNOBLD".
5. Once you have made RNO use RUNOFF.RNO as input to check out
the task and to generate a manual.
At Fermilab, we have used these modifications without problems for
some time. If you have problems, call Daniel B. Curtis at
(312) 840-3927.
***********************************************
[305,202]README.1ST
**********************************************
FLECS COMMAND
This package implements the FLECS FORTRAN pre-processor as a
PDS-type command of the following format:
FLEcs/qualifiers filespec
/FORTRAN[:fortranfile]
/NOFORTRAN
/KEEP
/NOKEEP
/LIST[:listfile]
/NOLIST
/OBJECT[:objectfile]
/NOOBJECT
/RUN
/NORUN
/SWITCHES:(/switchlist)
/TASK[:taskfile]
/NOTASK
The package implements two system tasks, the FLECS processor
itself (installed as system task ...FLE) and the command
processor (installed as system task $$$FLE). As written, the
command processor expects to be used with IAS V3.0 time-shared
systems, i.e. it makes use of TCS facilities. It could,
however, be adapted to run with PDX by replacing the calls to
the subtasking interface with appropriate task spawning. Like
PDS, the FLECS command processor also expects to find a FORTAN
compiler installed as task ...FOR and a task builder installed
as task ...TKB.
Movement to RSX11M or VMS should be simple.
***********************************************
[307,005]README.1ST
**********************************************
THIS DIRECTTORY [307,5] CONTAINS A LIBRARY OF FORTRAN CALLABLE
ROUTINES, INCLUDING ROUTINES DESCRIBED IN TWO PAPERS TO BE GIVEN AT
THE FALL '80 SYMPOSIUM. "RANDOM ACCES OPERAIONS ON SEQUENTIAL ACCES
FILES", AND "MULTIPLE PRECISION ARITHMETIC FOR ACCOUNTING PURPOSES".
THE MULTIPLE PRECISION ROUTINES ARE DESCRIBED IN A RUNOFF FILE NAMED
MULTIPLE.RNO, ALL THE REST OF THE ROUTINES ARE DESCRIPED IN THE RUNOFF
FILE NAMED CETUS.RNO. THIS VERSION OF THE CETUS LIBRARY SUPERCEEDS
ALL OTHER VERSIONS OF THE LIBRARY RELEASED ON EARLIER TAPES.
TO BUILD THE "CETUS LIBRARY" OF FORTRAN CALLABLE ROUTINES, YOU
COMPILE ALL THE *.FTN FILES WITH FORTRAN 4 (VERSION 1C WORKS ON ALL BUT
THE NEWEST ONES). THE MACRO FILES MUST BE BUILT WITH THE PREFIX FILE
SUPER.MAC. FOR EXAMPLE, >MAC CURSE=SUPER/PA:1,CURSE
THIS PREFIX FILE CONTAINS THE "SUPERMAC" MACROS, SO YOU SHOULD USE
THE BIGMAC ASSEMBLER AND INSTALL IT WITH A LARGE INCRIMENT.
AFTER ALL THE OBJECT MODULES HAVE BEEN CREATED, BUILD THEM INTO ONE
LARGE LIBRARY, AS MANY ROUTINES IN THIS PACKAGE WILL REFERENCE EACH OTHER.
MIKE HIGGINS
CETUS CORPORATION
600 BANCROFT WAY
BERSERKELEY, CA 94710
(415) 549-3300 X490
***********************************************
[307,011]README.1ST
**********************************************
DIGITAL TELEPHONE SYSTEMS SUBMISSIONS:
BLA -- SUPER TAHO RULES BLACKJACK GAME FOR VIDEO TERMINALS (VT52 OR TELERAY)
TEK -- TECHNICAL PAPER WRITER (SUPER BUZZ PHRAZE PROGRAM, PRODUCES RNO FILE)
WOR -- WORM CRAWLS ARROUND THE SCREEN OF VT52'S OR TELERAYS
V -- VIDIO PONG GAME FOR VT52'S
TEK is driven by some phrase files (samples included) and is a wonderful
way to produce long reports quickly (if you don't mind their being a bit
trite...)
***********************************************
[307,020]README.1ST
**********************************************
[307,20]README.1ST U.S. Geological Survey, Menlo Park, California
Spring 1987 RSX SIG Tape Submission
This directory contains a new release of a Virtual Disk driver and
associated utilities for RSX-11M-Plus and Micro/RSX versions 3.0 and
higher.
This package is a complete rewrite based on the previous work of
Stamerjohn, Mearns, and Everhart, and incorporating the following
new features:
- Support for shadowing of virtual disks
- Support for virtual disks contained on shadowed volumes
- Dynamic device database creation
- Logically contiguous volumes created from multiple
container files
- Virtual device naming liberties
- User-controllable container file locking and
write protecting
- Support for up to sixteen container files per virtual unit
- Use of secondary pool for container file data structures
- Use of advanced RSX-11M-Plus features
- Vectored utility programs
Please refer to the release notes for additional information.
The following files are in this directory:
README.1ST - You're reading it right now
VFGEN.CMD - Command file to build the works
RELEASE.RNO - Release notes and user guide (Bonner format)
RELEASE.DOC - Output file from RELEASE.RNO
V21.CHG - Description of change required to M-Plus V2.1
$IOFIN routine in IOSUB to get this to work
(implements internal I/O scheme).
VFPRE.MAC - Assembly prefix file
AVF.MAC - Source files for AVF
AVFERR.MAC
AVFHRC.MAC
DVF.MAC - Source files for DVF
DVFERR.MAC
VFDRV.MAC - Source files for driver
VFTAB.MAC
AVF.SAV - Non-vectored version of AVF
DVF.SAV - Non-vectored version of DVF
VFL.FTN - Task for logging VF: driver packets
VFLBLD.CMD
***********************************************
[307,022]README.1ST
**********************************************
Disk Disaster Recovery Tools
some Greg Thompson enhancements in Rsx11m 3.2 are here, plus disk
disaster recovery tools.
This area also contains many of the ODS-1 Disk Disaster Recovery
tools that have been produced over the years.
***********************************************
[307,025]README.1ST
**********************************************
[307,25] SUBMISSIONS FROM FORD AEROSPACE AND COMMUNICATIONS CORPORATION
3939 FABIAN WAY
PALO ALTO, CA. 94303
(415) 494-7400
STEPHEN M. LAZARUS
MAIL STOP X-90
EXT. 6291
FRANK HALLAHAN
MAIL STOP X-90
EXT. 5015
PERFRM .SLP;1 THIS IS A SLP CORRECTION FILE TO PERFRM.MAC OF
THE PERFORMANCE LIBRARY WHICH APPEARED IN
[307,25] OF THE SPR80 RSX TAPE. A BUG WHICH
LEAD TO INCORRECT NAMES APPEARING HAS BEEN FIXED.
AUTOBRU .CMD;1 COMMAND FILE TO PERFORM REGULAR CLEANUP AND SAVE
OF THE SYSTEM DISK. (RUNS FROM A PRIVLEDGED ACCOUNT)
AUTOBRU .TXT;1 DOCUMENTATION FOR AUTOBRU.CMD
ABBLD .CMD;1 FILE TO PREPARE A UIC TO RUN AUTOBRU.CMD
README .1ST;1 THIS FILE
***********************************************
[307,026]README.1ST
**********************************************
SCHEDULE
The program SCHEDULE (SKED) was developed in an attempt to provide a
simple method of resource/milestone scheduling.
The targeted user was to be both project management and senior software
staff. The typical senior software analsyst using the program would have
to schedule milestones for one to four additional persons. These persons
typically range from entry level programmers ad data base maintenance
staff to programmers with three to four years experience.
[ Editor's note:
This program is one of the gems of the 1977 tapes which has been
long overlooked. It should be very easily portable to VAXen or to more
recent Fortran compilers. ]
***********************************************
[310,130]README.1ST
**********************************************
CORE graphics package from DoD
Important Note: This directory has been archived at the June 79
UNIX Conference in order to reduce size of the distribution.
All c code has been archived in cont.a using the V7 (V6.5) archiver
*******************************************************************
This file contains:
1. A description of every other file on the tape.
2. Instructions on how to use this graphics package.
Files:
READ_ME This file
pr.sh Prints documentation and sources
genisco.c Genisco device driver
init_termin.c functions for initializing and terminating
user_program.c sample user program
defaults.c functions for setting and inquiring default values
inquiry.c inquiry functions
seg_attrib.c segment attribute handling functions
segments.c segment handling functions
primitives.c output primitives handling functions
prim_attrib.c output primitives attributes handling functions
view_trans.c functions for viewing transformations
view_surface.c functions for handling output devices
auxiliary.c general system service functions
errors.c error handling functions
???????.c the function having the name "???????"
run shell file to compile all .c files and load library
run-example shell file to load example
batch.c batching functions
(pseudodisplay) pseudo dislay file which will be created
Instructions for use:
1. For some device, write a device driver according to the
specifications in the documentation. A sample driver for the
Genisco raster display is in file genisco.
2. Substitute the name of the file containing your driver for
genisco in the run shell file. Also, edit the device
characteristics for the device into the view surface descriptor
in file init_termin.c.
3. Write a user_program that does something useful or use the
sample provided. See the run-example for details.
4. Submit run-example files to UNIX shell. This will create file
"example" which should execute.
5. When things go wrong (and they will), we'd be interested in
hearing about it, but we probably won't do anything about it.
Submit all complaints (in writing, not by phone) with the
accompaning fix (sources on tape, if necessary) to:
Department of Defense
9800 Savage Road
Ft. George G. Meade, Md. 20755
Attn: Mike T. Garrett, R53
***********************************************
[311,025]README.1ST
**********************************************
This area contains some miscellaneous documents for older
versions of TECO and some sources for pieces of TECO and a SLP
merge program. The TECO.MAC is a commented source for an early
version of TECO-11's main program, which has since been distributed
only as object code.
***********************************************
[312,315]README.1ST
**********************************************
This area contains:
1. Virtual disk driver for VMS. (note: vddriverv2.mar is a test
version and is reported to need work; use vddriver.mar).
2. RSX FOCAL
3. DOCTOR for TECO V29
4. a MAKE program src.
5. An RSX task disassembler (as opposed to object disassemblers).
6. Source for a un*x program that reads VMS Backup tapes
7. Some archives (msdos format) with lookalikes for UUCP and for
some other utilities.
8. DISOWN, which renames all tasks and moves them to CO: to let them
keep running after a logout.
Glenn Everhart
***********************************************
[312,356]README.1ST
**********************************************
1. Infinite precision calculator. This calculator allows real number
math of VERY long precision (hundred+ digits) and very large range.
Also runs nicely on VMS, native mode.
2. NPUT is a simple Fortran callable subroutine to handle bit fields
of arbitrary size and placement in PDP11.
***********************************************
[312,357]README.1ST
**********************************************
1. FDT is a Fortran Debugging Tool, a symbolic debugger for Fortran
4 Plus or F77. It also has the extended symbol table generator
to allow debugs with DDT22.
***********************************************
[312,361]README.1ST
**********************************************
Public Domain UUCP clone code
--the enclosed files have had some formfeeds stripped and linefeeds
replaced by carriage returns followed by linefeeds because ms-dos doesn't
like unix delimited files...
Bill Pechter
103 Governors Road
Lakewood, NJ 08701
***********************************************
[312,366]README.DOC
**********************************************
Program: DV -- Virtual Disk Handler for IAS
Author: Shack Toms
Technical Advisors, Inc.
4455 Fletcher Street
Wayne, Michigan 48184
(313) 722-5010
Description: DV is a program which creates an ordinary
non-contiguous disk file, and uses the
logical blocks therin as the physical
sectors of an imaginary disk drive.
This virtual disk drive can appear to
IAS as any of the known (to the author)
DEC disk drives. The size of the disk
is up to the user (the virtual disk is
not pre-allocated.)
Complete file control services are available
on the virtual disk. In particular:
INITIALIZE works on it (if it is emulating an allowed
device type)
MOUNT works on it
DISMOUNT works on it
DSC works on it
FLX works on it
In general, everything, works on it except for
disk diagnostics.
Genning for it: To sysgen a virtual disk into your system
edit the [11,17]SYSGEN.CMD file to include
the following directive (with all the other
DEV= directives.)
DEV=DV0,<150010,0,0,1000>,,,,VRTACP
Then perform a system generation.
Building it: Set your default UIC to the acccount where
this file was found. Then type:
PDS> @dv
After a while pds should buzz, and the build
will be complete.
Using it: When a disk is first created, it looks as though
BADBLOCKS had been run on it and found no bad
blocks.
The following command sequence will enable
a virtual disk. The disk will reside in a file
named SY0:[1,1]MYDISK.DSK. It will emulate
an RK05. You probably need various priveleges
to do this.
PDS> install dv
PDS> install/task:vrtacp sy0:[11,1]bigfcp ! [ or fcp ]
PDS> mcr loa dv
Fake disk file? mydisk/create/emulate:rk05
PDS> allocate dv0
PDS> initialize/index:beginning dv0 virt
PDS> deallocate dv0
PDS> mount/nooperator dv0 virt
That should do it.
When finished with the disk, use:
PDS> dismount dv0
PDS> mcr unl dv
To remount the disk, use:
PDS> mcr loa dv
Fake disk file? mydisk
PDS> mount/nooperator dv0 virt
The virtual disk handler remembers that the disk
is an RK05.
I have had much success with this device. I
have many large fixed length record files, with
short record lengths (8 bytes.) The most
efficient way for me to copy these files to
mag tape is to first copy them to a virtual
disk, and then to DSC that disk to mag tape.
Of course, I find that whenever I copy any
files from mag tape to disk (virtual or otherwise),
duing peak activity, there is a great probability
of a system crash. (The mag tape handler apparantly
interferes with disk UMR usage, since the crash
generally appears when a block from mag tape
overwrites a recently loaded task header.)
If you have a habit of running out of UIC's,
you may find this program helps.
For more complete information on the operation
and use of this program, read the blocks of
comments in the beginning of it.
***********************************************
[312,371]README.1ST
**********************************************
The RECALC.* modules here are a minor update to AnalytiCalc, last
presented in full on the Fall 1986 VAX and RSX tapes. They correct
a bug where the AVE[range] function crashed the spreadsheet if the
first cell in the range contained 0.0 as its' value.
***********************************************
[317,300]README.1ST
**********************************************
WIRAP
This is a wire-wrapping system which generates netlists and
checks them. documents are in source files and there is a
command file to actually generate the system. The manual
.rno file is missing.
***********************************************
[321,002]README.1ST
**********************************************
This area contains RATFOR for RSX (a FORTRAN preprocessor) and
also SCCS, a Source Code Control system, done with an indirect
command file.
***********************************************
[321,003]README.1ST
**********************************************
SUPERMAC
This area contains the Supermac macros and documents. These are a set
of structured macros for Macro-11 which can give Macro-11 the appearance
of a high order language.
***********************************************
[321,005]README.1ST
**********************************************
PDPSML - Structured programming macros for Macro-11
CLOCK - Set and control digital pathways' clock
***********************************************
[321,105]README.1ST
**********************************************
SCREEN IS A FORTRAN CALLABLE SUBROUTINE FOR VT52 (AND VT100 IN VT52 MODE)
SCREEN FORMATTING AND CURSOR POSITION TRACKING. IT WAS ORIGINALLY DESIGNED
TO ALLOW FORTRAN AND PASCAL PROGRAMMERS HIGH LEVEL SUPPORT FOR DATA ENTRY
PROGRAMS. SCREEN.RNO MAY BE PROCESSED BY RUNOFF TO PRODUCE DOCUMENTATION
THAT DETAILS THE USE OF SCREEN. SCREEN.OBJ SHOULD BE PLACED IN THE UIC
ASSOCIATED WITH LIBRARIES AND MADE AN INPUT OBJECT FILE TO THE TASKBUILDER
FOR PROGRAMS THAT USE IT.
NOTE: SCREEN IS WRITTEN IN SUPERMAC. THEREFORE DO NOT DELETE SCREEN.OBJ
UNLESS YOU HAVE SUPERMAC AVAILABLE TO REASSEMBLE SCREEN.
***********************************************
[323,002]AAAREADME.TXT
**********************************************
CONTINUOUS SYSTEMS MODELLING PROGRAM
This is a re-release of CSMP modified from a 1977 vintage RSX SIG tape
with mods to run on later RSX releases (and most likely on VMS with
little change. The Continuous Systems Modelling Program is a widely
used modelling tool to model systems of continuously variable quantities.
No documentation is presented, but texts in any engineering library can
tell how to use it.
***********************************************
[323,003]README.1ST
**********************************************
Directories of older tapes
These files are various "annotated directory" files of early RSX SIG
tapes (plus a few others). They will provide some pointers to code
available on these tapes.
***********************************************
[325,007]README.1ST
**********************************************
COMTAL RSX-11M DRIVER
The current Comtal driver uses each 8 bit image as an independent device
with all on a common controller. This is a good concept for an image plane
can be individually ALLocated to a user and RSX-11M protects him from unwanted
manipulation by others, or an image may be used by several tasks if no
ALLOCATE command is used. The other addressable memories
also have independent unit numbers.
CD0: - COMTAL IMAGE #1
CD1: - Comtal IMAGE 2
CD2: - " " " 3
CD3: - Comtal GRAPHICS 1
CD4: - Comtal GRAPHICS 2
CD5: - Comtal GRAPHICS 3
CD6: - Comtal GRAPHICS 4
CD7: - Comtal Function memory 1
CD10: - Comtal Function memory 2
CD11: - Comtal Function memory 3
CD12: - Comtal Programmable Target as FM #4
CD13: - Comtal GREEN memory
CD14: - Comtal RED memory
CD15: - Comtal BLUE memory
CD16: - SPECIAL functions unit
This assignment is somewhat arbitrary but goes a long way towards making
individual devices appear as individually addressable items and therefore
protectable, ie color table. Also in the context of the program IMG the
Comtal key board names for images is the same as for the IMG program.
It would even be better if the graphics memories could have their own device
names such as GR1:, GR4:, and the function memories have names FM1:, but
this appears to be a more complex issue because the device drivers are called
by these first 2 characters, -------- but wait we could give LOGICAL device
names to cd3: as GR1: using the ASN so the user could use
these funny names and yet get CD4: when using GR2: ------- horray!!!!!
Now to go do it !!!!!!!!!!!!!!!!
issue the following ASN cmds either local to your terminal at sign on
or globally in the startup commnad file . ASN CD:=IM1:/GBL
CD0:=IM1: - COMTAL IMAGE #1
CD1:=IM2: - Comtal IMAGE 2
CD2:=IM3: - " " " 3
CD3:=GR1: - Comtal GRAPHICS 1
CD4: GR2: - Comtal GRAPHICS 2
CD5: GR3: - Comtal GRAPHICS 3
CD6: GR4: - Comtal GRAPHICS 4
CD7: FM1: - Comtal Function memory 1
CD10: FM2: - Comtal Function memory 2
CD11: FM3: - Comtal Function memory 3
CD12: CU: for CURSOR - Comtal Programable Target
CD13: GR: for GREEN - Comtal GREEN memory
CD14: RE: for RED - Comtal RED memory
CD15: BL: for BLUE - Comtal BLUE memory
CD16: - SPECIAL functions unit
Now we have 13 special units that can be addressed as standard memory types
and can be moved to other types of image display gear regardless how they
are addressed or configured hardware-wise, ie graphics could be in a totally
indepentednt unit made by a different manufacturer !
The generic names used in the above will keep devices functonally seperate
and easier to remember and also have name similar to the swithches used in
th task SHO-controls comtal display output.
***********************************************
[325,013]README.1ST
**********************************************
6-dec-79
N.C.A.R
Boulder, colorado
(303)-494-5151 x718
Bob Brown
This briefly describes IMG the image manipulation utility.
It may be used with its companion SHO.
IMG is designed to move images from device to device and to and
from FILES-11 devices as well. The implementation can be used with
most any video display device with 512x512 organization. Other display
formats may be easily accomdated provided that small parametric changes
are made to IMG source. The pixel resolutions handled are 8 bit byte and
1 bit . Others could be handled with reworking of source.
The first implementation handles
features of the COMTAL Vision 1 display which has 3 images planes and 4
graphic overlay planes as well as a function memory for each image and
a color table for psuedo-color enhancement. The image planes are
addressed as CD:,CD1:,CD2: but if the user has ASNed logical
names ,ie. ASN CD:=IM1:/GBL ,the logical should be used as they make it easier
on the user. The color and function memory tables are in
CD7: thru CD14:.
ALL units are directly addressed,even though they are not
512x512 by 8 bits. The image memory planes may be reassigned to be IM1:,
IM2:,IM3: because people dont like to think of plane 1 as unit 0.
It should be easy to use the code in a RSX-11 system where more or
less image or graphic memories are present.
The only QIO
required to be recognized by the device IO.RLB/IO.WLB for standard
raster line moves of data. The QIO must include as parameters the
starting Y line # and X byte element #. Currently the X byte element
is always zero,(and not honored by the driver).
QIO$s #IO.RLB,lun,lun,,iosb,,<#BUF,NBYTES,,,YLINE,X>
To assemble the code:
MAC @IMGASM
There are 2 fortran subroutines CONVOL & GRAPHL
they work when compiled with F4P x=x/-TR.
I dont know what will happen with FOR
To Compile the 2 subs:
F4P @IMGCMP
To build the task:
TKB @IMG
Example of command strings in
EDGE.CMD
extracts edge information from an image
USER SITE MODIFICATIONs:
The printer spooled to is a PRINTRONIX 300 which has 780 dots across each
row, the 512 images are there printed as 1 bit deep graphics using only
the 1st 512 dots. The code GRAPHL.FTN formats the graphics line into
the bit patterns the printer wants to see ,could be modified for Versatec
or Gould easily.
The CONVOL.FTN code is simple Fortran for implementing the digital convolver
as a 3x3 kernel that moves over the data. It can easily be enhanced and
perhaps speeded up greatly by others or add different filtering modes.
KNOWN ERRORS:/AP - does not appear to actaully append
to the end of an exisiting file.
/FL - FILE n on mag tape seems to work.
To date no glaring errors are apparent although some combinations of
switches may produce bizarre results. Currently errors are reported
but the exact cause,ie. 'PRIVELEDGE VIOLATION' is not. This will
be enhanced later as will be portability.
Some switches in some strings will be ignored without error
comment if the code does not expect them in the current context.
************************************************************
To assemble SHO:
MAC @SHOASM
To build SHO
TKB @SHO
This code SHO is specific for the Comtal Vision One but could be altered
for another display .
end of readme.1st
***********************************************
[330,011]README.1ST
**********************************************
This program resequences statement numbers in FORTRAN IV-PLUS
programs. See RESEQ.DOC for more detail.
***********************************************
[332,100]README.1ST
**********************************************
[332,100] README.1ST
THIS ACCOUNT CONTAINS SUBMISSIONS FROM:
BILL BURTON
TEXAS RESEARCH INSTITUTE FOR MENTAL SCIENCES
1300 MOURSUND
HOUSTON, TEXAS 77030
(713)-797-1976 EXT 501
THE SUBMISSION CONSISTS OF:
1. THE FINAL VERSION OF TWO PROGRAMS FOR DOING PARTIAL
RESTORES OF DISKS FROM DSC TAPES.
THESE PROGRAMS FIRST APPEARED ON THE SPRING 1981 RSX TAPE.
FILES:
DSCTAP.TXT DSC TAPE FORMAT DESCRIPTION
DSCDIR.* PROGRAM TO GET DIRECTORY OF DSC TAPE
DSCCPY.* PROGRAM TO RESTORE A SUBSET OF A
DSC TAPE TO DISK.
DSCFTN.FTN FORTRAN SUBROUTINES FOR ABOVE.
DSCMAC.MAC MACRO SUBROUTINES FOR ABOVE.
2. REPRINT AND PATCH FILES FROM THE MARCH, 1982 ISSUE OF THE
UNSUPPORTED (RETIRED) VERSIONS OF RSX WORKING GROUP
THESE FILES PATCH THE FLX UTILITY DISTRIBUTED WITH RSX-11M
VERSIONS 3.0 AND 3.1 TO ALLOW 9-CHARACTER FILE NAME CATALOGS AND
SEARCHING.
FILES:
FLX.TXT REPRINT OF THE MULTI-TASKER ARTICLE
LIPRC2.M30 PATCH FILES FOR VERSION 3.0
MTFLCK.M30
SETOUT.M30
LIPRC2.M31 PATCH FILES FOR VERSION 3.1
MTFLCK.M31
SETODT.M31
***********************************************
[334,002]README.1ST
**********************************************
OBR -Object reader, reports globals defined and locations and
other useful items.
Set of Fortran callable subroutines for system and string
function access.
***********************************************
[334,004]README.1ST
**********************************************
QX - Report queue listings with extensions. More report details
than DEC queue reports. For RSX11M.
***********************************************
[334,005]README.1ST
**********************************************
DSM and DSX - Disk Storage Monitor and Disk Storage Examine routines
to allow a system to keep track of disk space being used under
RSX.
***********************************************
[334,006]README.1ST
**********************************************
PROGRAM LIBSEE.FTN SYSTEM ROSENBERG 13-AUG-80
PROGRAM TO EXAMINE A SPECIFIED LIBRARY FILE FOR A MODULE
OR ENTRY POINT NAME
This program enables a user to query a specific library
file for a module or global symbol. If either is found, the
program will output the module name, its insertion date, its ident
field, and all of its defined entry points.
Entering a * at file name time will cause program exit
Entering a * at symbol name will cause prompt for a new library file.
The extension .OLB is assumed for all files.
***********************************************
[337,030]README.1ST
**********************************************
Tektronix etc. Graphics Package
This package is a revision to the package submitted
on the Chicago spring 1980 RSX/IAS tape. There are 6 changes.
1. a bug in the cross hair cursor support has been eliminated.
2. a bug in SCALE.MAC which caused an occasional floating point
to interger overflow error has been eliminated.
3. to run under RSX11M you should just assemble all the *.MAC'S
and build your library.(the original version incorrectly directed
you to do some conditional assemblies)
4. there is a conditional assembly statement to change in PLOTPRIMS.MAC
and PLTDAT.MAC to allow the package to support a Tektronix 4025
(the user program must call TK4025)
5. for users in an overlayed enviroment only PLTDAT.OBJ needs to
be in the root.
6. a bug in the call to 'HOME' has been fixed to allow it to work on
all terminal types.
All the fortran programs on the tape except TK4025 are demonstration
programs that should be compiled and linked to the library before
you try to use them.
SFGL70 is a graphics package which supports Tektronix
4006,4010,4014 AND 4025 terminals. It's useful feature is that in
most cases it will only add approximately 1K words to the user task.
When using the file SFGL70.DOC to learn how to use the package,
ignore the references to PDP-6 equivalent. They were needed internally
at UTRC because this package replaced an older graphics package our
users had been using.
This file explains the SFGL70 package submitted to the
1980 FALL DECUS Symposium by Ken Demers. If you encounter
********************************************************
editor's note: I cannot find any submission by Ken Demers
on the fall 1980 tape. The only stuff I can find is on
the Chicago spring 1980 tape.
**********************************************************
any problems or have any questions please call me at
United Technologies Research Center East Hartford, Connecticut
(203) 727-7527. The package can run under IAS and RSX-11M.
I also have a version that can be conditionally
assembled for RT-11(not on this tape). SFGL70.OLB is the library to be
linked with the user task. The distributed version has been built with IAS.
To run under RSX-11M assessmble to source modules and
create a library from the object modules.
The user manual is in RUNNOFF format in the files SFGL70.RNO
and SFGL70.DOC.
I origionally received the PLOTPRIMS.MAC routine from
Steve Davis of Haskins Labs New Haven, Ct. It was origionally
developed at the Speech Communications Research Lab Inc.
Santa Barbara, Ca. However I have made various changes to
enhance the total package which I developed.
One last comment: Many people around the USA are currently
using the package and find it very useful. The package will
work on a VT100 (if it has the hardware to make it look like
a Tektronix 4010). There will be future enhancements to take
full advantage of the VT100's additional capability.
Thanks,
Ken
***********************************************
[337,050]README.1ST
**********************************************
This area contains Jim McGlinchey's
"The Hitchiker's Guide to RSX"
***********************************************
[340,001]README.1ST
**********************************************
Atmospheric Sciences Division (ASD)
Alberta Research Council
Software release description.
This software is released in the spirit of the RSX/IAS user's
group, and the usual disclaimers hold for these programs.
Any problems encountered, or suggestions, or even bug fixes,
should be sent to:
Mark Johnson
Atmospheric Sciences Division
Room 204
8625 - 112 Street
Edmonton, Alberta
T6G 1K8
The following is a list of the ASD UICs, and a few helpful?
comments. Please note that many of the programs require two libraries
before they can be built. These libraries are on [340,6], however,
the command files refer to HG:[111,1] to access the libraries. If
this UIC is unavailable, the command files may be edited.
GOOD LUCK!
Mark
[340,1] ABSTRACTS
ASDEXP.TXT -This explanation file.
[340,2] ASD MAIL - Inter-user message facility
There are two tasks used to support ARC mail: the MAIL task,
and the notification task. The MAIL task is built from an
object library (MAIL.OLB), the noification task is built from
source.
MAIL.RNO -Documentation.
MAIASM.CMD -Assemble individual MAIL routines.
MAITKASM.CMD -Assemble the notification task.
MAITKB.CMD -Taskbuild the MAIL task.
MAITKTKB.CMD -Taskbuild the notification task.
THEMAIL.CMD -Build the works.
MAICSPARS.MAC -Source for MAIL modules.
MAIDAY.MAC
MAIDEFINE.MAC
MAIDIE.MAC
MAIFDB.MAC
MAIFILDSD.MAC
MAIFN2FDB.MAC
MAIL.MAC
MAILINBUF.MAC
MAIMAIL.MAC
MAIME.MAC
MAIMESOUT.MAC
MAIMRKTIM.MAC
MAINAMSTR.MAC
MAIOPNMAI.MAC
MAIQUE.MAC
MAIRDPMPT.MAC
MAITERM.MAC
MAITSK.MAC -Source for the notification task.
MAIL.MAP -Example maps.
MAITSK.MAP
MAIL.MLB -Macro libraries used by MAIL.
MAIMCR.MLB
MAIL.OLB -Object library for MAIL.
***********************************************
[340,020]README.1ST
**********************************************
;
; DOC and KWC are two utilities written at the
; Atmospheric Sciences Division of the Alberta
; Research Council, Edmonton, Alberta.
;
; DOC - a handy aid to generation of formatted
; documents from predefined templates.
;
; KWC - a utility for the generation of KWiC
; (Key Word in Context) index listings.
;
; Included with these utilities is the Timesaver
; macro library and the general purpose object
; library from ASD, which is required in building
; these utilities.
;
***********************************************
[341,001]README.1ST
**********************************************
Please find enclosed the contributions from the Maine LUG for the
Fall '80 DECUS RSX tapes. Actually, all contributions this time around are
from the Jackson Laboratory.
Maine LUG Librarian
The Computing Center
The Jackson Laboratory
Bar Harbor, Maine
04609
Phone: (207) 288-3371 X-306
This software is submitted in the general spirit of DECUS. Thus the
software should be considered as experimental. The Jackson Laboratory assumes
no responsibility for the use or accuracy of the software, and the software
should not be used in a profit oriented fashion.
If you have problems, patches, suggestions, or comments, feel free to
contact the authors. No promises regarding maintainance though. The authors
are:
Eric Johnson ( LG.... BRM... LEVELS TECO_macros )
John Guidi ( $$$BLK $$$LBN TECO_macros )
Enjoy!
------------------------------------------------------------------------------
LG....
The LG psydo device handler is used as a resource task at the
Jackson Laboratory. It provides a clean means for implimenting privileged
processes for non-privileged tasks and for providing oft needed facilities
through a know communications interface (QIO's). We use it as a system log
because we run LEVELS on a VT100 as our console. By redirecting PDS's LUN
10 from CO0: to LG: all login/logout messeges go to both the console and to
a file.
LGINSTAL.RNO should provide enough info to get LG running. The
source code documentation and the MACRO program LGTST give examples for using
the QIO mechanism to talk to LG. The following is a list of the files
associated with the handler and test programs.
LGMAC.CMD LGTKB.CMD LGTST.DCL LGDEF.MAC LGINIT.MAC
LGROOT.MAC LGTST.MAC KILC.MAC WAKUP.MAC LOG.MAC
LGINSTAL.DOC
------------------------------------------------------------------------------
...BRM
BROOM is a little utility that writes a block of nulls to every
free block on a Files-11 multi-directory device. This is done periodically
to insure that data from deleted files is kept private. It uses FCS to
allocate the largest non-contiguous file possible, then writes to each block
in the file. The files associated with this utility are:
BROOM.CMD BROOM.MAC BROOM.TKB BROOM.DOC
------------------------------------------------------------------------------
LEVELS
This is another version of the now famous LEVELS. This one
has VT100 ansii mode support for the real time flavor. It does some
fancy reverse video, and maintains separate scrolling regions for levels
and the operator.
LEVASM.CMD LEVTKB.CMD LRVPRE.MAC LEVELS.MAC LEVLIB.MLB
------------------------------------------------------------------------------
$$$BLK
$$$BLK is a block identifier utility. It is useful in determining
which files are allocated to particular locations on a Files-11 disk.
Input to the utility consists of a list of LBNs. The utility outputs the
file names which are allocated to the LBNs, as well as the corresponding
VBN for each file. Read the file BLK.DOC to get started.
BLK.DOC BLK.MCR BLK.PDS BLK.RNO BLK.TKB
BLKCML.MAC BLKDRV.MAC BLKHLP.MAC BLKIMP.MAC BLKINSTAL.RNO
BLKMAP.MAC BLKPRE.MAC BLKTRP.MAC BLKWRK.MAC PIPUTL.OLB
------------------------------------------------------------------------------
$$$LBN
$$$LBN is a LBN mapping display utility which will identify all LBNs
allocated to any user specified files. Input to the utility consists of file
descriptions (possibly wild), or an indirect file which contains a list of
files to be displayed. The file LBN.DOC is the starting point.
LBN.DOC LBN.MCR LBN.PDS LBN.RNO LBN.TKB
LBNCML.MAC LBNDRV.MAC LBNDSP.MAC LBNFND.MAC LBNHLP.MAC
LBNIMP.MAC LBNIND.MAC LBNINSTAL.RNO LBNINX.MAC LBNPRE.MAC
LBNTRP.MAC
------------------------------------------------------------------------------
TECO Macros
There are a number of TECO macro sources (.TES) in this account. The
file TECMAC.DOC describes how command line syntax and documents the function
of each macro. These macros are not squished (obviously!).
TECMAC.DOC ASCII.TES CTLIMP.TES KEEPER.TES NODUPS.TES
STRIPPER.TES TABREP.TES WILD.TES 029TO026.TES
------------------------------------------------------------------------------
***********************************************
[341,100]README.1ST
**********************************************
PONG
This is the old PONG game, for VT52 or VTxxx emulating VT52,
for two players. Primitive but, to some, a classic.
***********************************************
[341,307]README.DOC
**********************************************
THIS PL/I PROGRAM IS AN IMITATION OF THE ORIGINAL ELIZA
PROGRAM WRITTEN IN LISP BY JOESPH WEIZENBAUM (MIT).
THIS PARTICULAR PROGRAM WAS INSPIRED BY STEVE NORTH'S
ARTICLE IN CREATIVE COMPUTING.
THIS DISTRIBUTION CONTAINS THE FOLLOWING FILES:
ELIZA.PLI - PL/I SOURCE FILE OF ELIZA
ELIZA.OBJ - OBJECT MODULE OF ELIZA.PLI
THE FOLLOWING 4 TEXT FILES ARE USED BY ELIZA. THEY WERE
OBTAINED OF THE FALL DECUS '78 TAPES:
1) DOCTOR.KEY - THIS FILE CONATINS A LIST OF ALL THE
KEYWORDS WHICH ELIZA CAN RECOGNIZE.
2) DOCTOR.RPL - THIS FILE CONTAINS A LIST OF ALL THE
REPLIES WHICH ELIZA KNOWS.
3) DOCTOR.NUM - FOR EACH KEYWORD, THE CORRESPONDING
DOCTOR.NUM RECORD CONTAINS THE RECORD OF THE FIRST
REPLY FOR THIS KEYWORD, AND THE NUMBER OF REPLIES
AVAILABLE.
4) DOCTOR.CON - THIS FILE CONTAINS CONJUGATES, AND THE
CONJUGATE'S PAIR IN THE NEXT RECORD.
***********************************************
[342,002]README.1ST
**********************************************
TECO V36
This area contains the last submitted TECO V36, submitted by DEC
about spring '79 to the tapes. In this version the screen and teco
routines were only in .OBJ form so disassembled versions are
provided to guard against anything that might eat the .OBJs in
the future.
The complete TECO manual is here also.
***********************************************
[343,040]README.1ST
**********************************************
PETER J. HUNTER
U.C. DAVIS
DIV. ENV. STDS.
DAVIS, CALIF. 95616
(916) 752-7533
This directory contains a Foreign Tape Processor(FTP) which allows
a user to read, write and dump tapes that are not RSX compatible.
FTP.HLP explains how to use FTP, and a ready to use task image is
included as well as all source files. Inaddition to FTP there is a
string library(STRING.FTN) for FORTRAN which maybe of some value.
Example uses of FTP are:
FTP>FILE1.DAT=MT0:/RS:80:800
This would copy the current file on MT0 to a disk file named
FILE1.DAT. The tape file is blocked with 10 logical records
per physical tape record.
FTP>MT0:/FT:EB/RS:84:840 = MYPROG.FTN
This would copy the ASCII file MYPROG.FTN to tape MT0
translating ASCII characters to EBCDIC. The tape would
be blocked with 10 logical records of 84 characters per
physical tape record.
***********************************************
[344,001]README.1ST
**********************************************
New and modified material from KMS Fusion:
The following is not guaranteed in any way. All the rights to
the source code are owned by KMS Fusion, Inc. Anyone may use the
programs, but not for resale, and please include a copywrite notice
from Robert Hays, KMS Fusion, Inc., 1986 and from any other original
authors as noted in the code comments.
The subdirectories on this tape are:
[344,1] - Various stuff, many SLP files, etc.
[344,2] - CHCKPM
[344,3] - Small library of subroutines.
[344,4] - SBT, code to submit print jobs to a VAX
[344,5] - MOVE, a SET DEFAULT program in FORTRAN
[344,6] - RPTBLD, a command file to create RPT reports
[344,1]IDLE --
[344,1]DVCDAT --
DVCDAT dumps V3.0A, B, C, and D device data bases. This is a
modification of an old utility written by J. Neeland.
[344,1]CKPVEC --
This will clear out high memory at this point and will reschedule
the task to clean out dead wood every 20 minutes.
[344,5]OLDMOVE.CMD --
[344,5]MOVE --
Set default type commands
[344,2]CHCKPM -
Check for PM and notify people logging in.
[344,1]CHK.MAC -
It just lists checkpointed tasks by name. It would probably be
easy to vector....
[344,4]SBT --
This is a FORTRAN program that uses DECnet-RSX calls to communicate
with a VMS command file and program to print files on the remote
node.
[344,1]SYSBRU --
This is a modification of the BRU.CMD file by T. Wyant on the Spring
1985 tape.
[344,6]RPTBLD --
A command file to interface to RPT.
[344,1]APPNDFILE.CMD and APPNDSUB.BAT --
APPNDFILE.CMD will merge your accounting and error logging files
to a destination directory.
Robert Hays
KMS Fusion, Inc.
3621 South State Road
Ann Arbor, MI 48106
***********************************************
[344,030]README.1ST
**********************************************
CVL - Change Volume Label
FRAG - report disk fragmentation
TRUNC - truncate files, don't alter their rev. dates.
***********************************************
[344,051]README.1ST
**********************************************
TRANSIENT LIBRARIES under RSX11M
One problem with transient libraries is that if memory is tight
the region required for the library sometimes can not get created and
LDLIB produces an annoying message that the task can't run because
the region could not be created. Several steps are taken to solve this
problem (at least partially)
1. The SUSPEND/RESUME logic/handshaking between LDLIB.TSK and LDLIBS
is replaced with STOP/UNSTOP for systems having parent/offspring
tasking GENed into their system. A STOPed task has 0 effective priority
and is immediately elegible for checkpointing. A suspended task only
can get checkpointed by a higher priority task. This makes it easier
to checkpoint the initiating task while LDLIB is doing its thing.
2. CKP... has been modified to accept requests from LDLIB to clear
out core. LDLIB now sends off requests to CKP... to checkpoint
everything (!!!) it can when LDLIB needs to load a loadable library.
Clearly this would cause a lot of thrashing on a system in which
tasks with loadable libraries were bouncing in and out of core constantly.
However, in many systems, the tasks built with loadable libraries are
infrequently used.
3. CKP... has been modified so a privileged user can RUN CKP... and
checkpoint everything out of core.
***********************************************
[346,100]README.1ST
**********************************************
Ralph Stamerjohn goodies
This area has various documents and utilities submitted
by Ralph Stamerjohn over the years. They include the CDA Workbook
file, virtual terminals, virtual disks, the ACP manual, loadable
XDT, SIG tape index of early tapes, and more.
***********************************************
[350,124]README.1ST
**********************************************
This UIC contains the files required to manufacture a Read-only ACP for
ODS-2 file structures. The sources are made from the V3.0 RSX-11M+ kit.
To build the ACP;
Place the original SYSGEN sources on a volume.
Copy the files in this UIC to a new directory at [13,14] on that
volume.
Execute @slipper. This makes the new macro sources in this uic from the
sources in [13,10].
Execute @doall. The UIC of [13,24], [13,34], [1,54] are required on the
volume. The RSXMC.MAC is required in LB:[11,10] and the EXEMC.MLB are required
on LB:[1,1]. If you link in the debugger, the debugger will start at the first
call to the ACP. i.e. 'Mount du:/ove/show' will produce the first break. Just do
a go and the ACP is off and running. The ACP is not overlaid so the address are
correct for a debug set-up.
If you make a change to the sources, a command file called onefile
will reassemble it for you.
In [350,125] I have added a directory routine to use a modified PIP.
With this PIP you can do directorys and copy files. The full file directory
string has to be used. You must call out the full file string for it to work
correctly. PIP clobbers the default directory string for partial file strings.
Any Questions?
Dan L. Eisner
Perkin-Elmer Corporation
7421 Orangewood Avenue
Garden Grove, California
***********************************************
[350,125]README.1ST
**********************************************
This UIC contains a multi level directory pip called pir. To build;
Move thes file to a new directory in [50,14]. Be sure the sources for
FCS are in [50,10].
Execute @slipper
Executre @pir
Try pir. It is in [3,54] so it can be run via $pir.
The only changes to pip are the directory find routines. I have not had time
to correct pip for the overwrite of the default directory. The directorys
pir may use is [hhh.hhh.hhh], [.ggg.ggg], [-], [.], [-.gggg], [-jjj], and
several other combinations.
Any questions?
Dan L. Eisner
Perkin-Elmer Corporation
7421 Orangewood Avenue
Garden Grove, California
***********************************************
[350,340]README.1ST
**********************************************
The following driver and utilities are provided by:
Eddy Fey
Fey Professional Services
Suite 118
Sugar Land, Texas 77478
713-530-5187
14727 Delbarton
Houston, Texas 77083
713-495-3058
Pipe Driver (VX:) for task-to-task communications.
This is an update to my previous released driver.
It has been enhanced to include a limit counter
The default limit for each queue is defined in the the U.CW4
word of the UCB for each 'device'.
this default can be accessed through the MCR command -
set /buf=vx0:100. where 100 is the new default limit.
This default limit is for all queues created in the particular
device.
The individual queue's limit can be accessed via the VXUTIL program.
i.e. VXUTIL
VSU>L 100,QUENAM
where 'QUENAM' is the queue's name and 100 is the new limit.
Enter a '?' at the prompt to get instructions.
VXDRV is a pipe queue driver which is accessed via normal QIO
directives. Each VX device accesses a partition which contains
the queue area for that device. There can be multiple devices.
VXDRV accesses the partition using optimized block moves.
VXUTIL is a utility program for looking at the queues, changing
parameters, creating queues, deleting queues, etc.
VXUTIL defaults to VX0: device. To access the other devices,
VXUTIL needs to be renamed upon installation in the following
manner:
...VSU = VX0:
...VPU = VX1:
...VHU = VX2:
VXPAR is the partition for VXDRV. Each partition must be renamed
upon installation:
VX0PAR = VX0:
VX1PAR = VX1:
VX2PAR = VX2:
The size of each partition can be up to 16384 bytes (2 APR's)
PIPE.FTN is an example subroutine to access the VX queues from a
FORTRAN program.
SETUPVX.CMD is a command file to build the driver and install the
partitions and VXUTIL.
***********************************************
[351,073]README.1ST
**********************************************
ECR (Enhanced Console Routine)
Description:
ECR is a port of Robin Miller's AUX program to run under IAS.
The ECR program allows VT100 auxillary key definitions and command
line editing ala VAX/VMS V4.x systems. The program also saves the last
twenty commands which can then be recalled. In this release of ECR,
the auxillary keys are statically defined.
The main ECR documentation is contained in file AUXKEY.PAD. This file
is used by ECR to display help from the program when the PF2 (help)
key or the PF1 (GOLD) PF2 key is pressed. This help file must be
placed in LB:[1,2] for system wide access.
ECR may be executed from MCR, or it may be installed as your default
CLI using the /CLI= command. Note that ECR does not go away like MCR,
but does a SPAWN and a STOP for event flag.
This version of ECR has been modified to use the REESE system security
system, whereby a pds style user privilege word is stored in the users
PUD on login, and the routine PRICHK verifies whether the user has the
required privileges to complete the command. Users who do not wish the
PRICHK feature will have to comment it out of the code themselves.
ECR also has been modified to allow the definition of up to 48 special
command re-definitions, similiar to the way VMS lets you define com-
mands, (although in a simpler way.) Gold-help now generates a three
page display, which includes information on this feature. For a fuller
description, see the file ECRCMD.DOC.
ECR also has a default name mode, whereby it remembers the last phrase
following the command name and uses it if nothing follows subsequent
command names. This lets you do things like the following:
o Define a command KEF KEF name expands to KED name.for
o Define a command MAC MAC name expands to MAC name,name=name
o Define a command LIN LIN name expands to TKB @name
You can then edit,link and compile a simple fortran program by issuing
the following commands:
ECR>kef name
ECR>mac
ECR>link
The following control keys are used by ECR
Control Keys:
CTRL/A Toggle between overprint and insert mode.
CTRL/B Skip backward to next character input.
CTRL/C Delete the entire command line.
CTRL/D Delete to end of command line.
CTRL/E Position to end of command line.
CTRL/G Switch default name mode on/off.
CTRL/F Skip forward to next character input.
CTRL/H (BS) Position to beginning of command line.
CTRL/J (LF) Delete the previous word.
CTRL/M (CR) Terminate the current command line.
CTRL/N Reload specially defined commands from ECR.CMD
CTRL/R Recall all previous command lines.
CTRL/T Display one line status report.
CTRL/U Delete to beginning of command line.
CTRL/V Display the current version number.
CTRL/W Refresh the current command line.
CTRL/Y Display all current specially defined commands.
CTRL/Z Exit from the AUX program.
DELETE Delete the previous character.
!n Recall command line number 'n'.
The numeric keypad is set up to do the following:
+-------+-------+-------+-------+
| |10 |11 |17 |
|GOLD | HELP | VTL | DEL L |
| |CTL KEY| VDI | UND L |
+-------+-------+-------+-------+
|7 |8 |9 |18 |
| WHO |QUE /AL|CLR SCR| DEL W |
| NTD |QUX /TI|C WIDTH| UND W |
+-------+ +-------+-------+-------+-------+
|12 | |4 |5 |6 |19 |
| ^ | |ADVANCE| BACKUP| PRINT | DEL C |
| | | DEL | PURGE | DOC | UND C |
+-------+-------+-------+-------+-------+-------+-------+
|14 |13 |15 |1 |2 |3 |21 |
| < | V | > |S WORD | EOL | KED | TERM- |
| | | | DEMO |DEL EOL| SPY | INATE |
+-------+-------+-------+---------------+-------+ CMD |
|0 |16 | |
| DIR | EDT | |
| SRD | TECO | MAIL |
+---------------+-------+-------+
***********************************************
[351,144]README.1ST
**********************************************
TEM - Terminal EMulator for RSX -- Version: 87.077 Page 1
Author: T. R. Wyant III, E. I. DuPont de Nemours, Richmond,
VA.
Operating System: RSX11M+ V2.0 forward, RSX-11M V4.0 forward,
RSX-11S V4.0 forward, VAX-11 RSX V2.0 forward.
Language: MACRO-11
Memory Required: 16KW
Other Hardware Required: Dial-out Modem
Keywords: RSX-11; Communications; Terminal Emulator
Abstract:
TEM provides "dumb" terminal emulation over a full duplex TT:
line. It allows the user to "become" a terminal on a remote
system, and to do ASCII file transfer between systems. TEM has
been used to communicate with RSX, VMS, RSTS, and TOPS-20 sys-
tems, as well as non-DEC equipment. It requires no software on
the remote system (and therefore has no error checking).
In addition to the basic functionality, TEM can automati-
cally issue canned commands to smart modems at the beginning
and end of a session. The user can also select from the fol-
lowing features:
* Local Echo.
* Automatic linefeed on carriage return.
* Translation of inbound control characters to ASCII abbre-
viations.
* Passthru of control/s, control/q, control/o and control/x
to the remote system.
* User selectable attention and end-of-file characters.
* Inbound and outbound character mapping.
* Specifiable record delay and prompt character for file
transfer.
* Parity generation and checking.
* Support for dialout modems as remote devices.
TEM requires at least RSX-11M+ V2.0, VAX-11 RSX V2.0,
RSX-11M V4.0, or RSX-11S V4.0. If running under RSX-11M or
RSX-11S, it requires the full-duplex TT: driver, get/set mul-
tiple characteristics, and unsolicited input AST's. Correct
access of named directories and files numbered in decimal re-
quires the FEAT$ directive. The GIN$ directive is used to pre-
vent nonprivileged users from using TEM to read files that are
none of their business (eg: LB:[0,0]RSX11.SYS). An attempt
has been made to conditionalize TEM for RSX-11M V3.2, but I
have no way to check it. TEM can be initiated from and commun-
icate with any reasonable serial device, but there may be res-
trictions if not being used on a TT:-type device.
***********************************************
[351,145]README.1ST
**********************************************
This directory contains two papers that were to be presented
at the Spring 1987 DECUS U.S. Symposium -
Introduction to the RSX, P/OS, and RT Indirect Command File
Processor (RX001)
Programming in the RSX Indirect Command Language (RX002)
Also included are the command files from which the examples in
RX002 came.
The files in this directory include:
README .1ST;1 2./2. This file
BRU .CMD;1 100./100. BRU Preprocessor (rewritten)
CRASHDUMP.CMD;1 22./22. CDA preprocessor
PRN .CMD;1 43./43. Printer port handler
SYMDMP .CMD;1 15./15. .STB file dumber
UPS .CMD;1 26./26. MAIL large numbers of files
RX001 .RNO;1 88./88. RUNOFF source for RX001
RX002 .RNO;1 111./115. RUNOFF source for RX002
RX001 .TXT;1 51./51. Slides for RX001
RX002 .TXT;1 58./58. Slides for (part of) RX002
11. Files selected 11. Files total
Selected blocks used/allocated: 516./520.
File sizes are subkect to change, as the files themselves are
subject to revision.
***********************************************
[355,002]README.1ST
**********************************************
BM - Look through bitmap to see where and how big holes are
and how fragmented the disk is.
DUMHEADER - Dump file header in readable format
DUMP - Formatted dump of file (like VMS DUMP)
ERROR - Error notification facility, again something like the one in
VMS.
FIDDLE - Change bits in a disk based bitmap (e.g. to fix corrupted
file header files)
SPQ - Display print queue in 11M
BIOMAC Structured Macros for Macro-11
TIMEIT - Execution profiler (finds out where a program spends its time)
USAGE - Disk Usage Summary report generator.
***********************************************
[356,040]README.1ST
**********************************************
KERMIT-11
This contains Kermit-11 from Brian Nelson, as of Spring 1987
***********************************************
[356,041]README.1ST
**********************************************
VMSTPC
This contains a VMS version of TPC, a tape to disk to tape copy
utility that's format independent and blindingly fast. From
Brian Nelson.
***********************************************
[356,042]README.1ST
**********************************************
This area contains server software usable with JNET to provide file
access to BITNET sites from a VAX.
***********************************************
[356,045]README.1ST
**********************************************
Kermit-11 under IAS
Original Author - Bruce C. Wright
Updated for version 3.2 - Frank R. Borger
This document describes some of the features and restrictions of
Kermit running under the IAS operating system. The IAS version
of Kermit is a modification of the RSX-11 version of Kermit, but
because of differences in the operating systems not all of the
features of RSX Kermit are currently available under IAS Kermit.
Supported features
IAS Kermit supports most of the features of RSX Kermit:
1. File transfers
2. Remote and local commands
3. Spawning installed tasks
4. Dial-out lines
5. Help facility
***********************************************
[360,200]README.1ST
**********************************************
This area contains the ARAP library of utilities. These permit various
file and other operations from Fortran and are used by some other
utilities on this tape.
***********************************************
[360,205]README.1ST
**********************************************
Command files and humor
There's a round TUIT here (for things you'll do when you get a
round TUIT), some other humor, and some system management
and backup command files.
***********************************************
[360,214]README.1ST
**********************************************
Fortran conditional compilers
There are two conditional compiler preprocessors here. They allow RSX
and VAX Fortrans to have conditional compilation that's more flexible
than the "D" line facility DEC supplies.
***********************************************
[360,217]README.1ST
**********************************************
KPS - KEYPUNCH SIMULATOR
03-JAN-79
The purpose of this program is to simulate the functions of the
keypunch using a terminal. KPS is a very simple editor with
the added special functions of keypunches. These functions
include the use of 'program cards' and a 'dup' key,
allowing input of a fixed field nature where keypunch functions make
the typing task easier.
***********************************************
[364,020]README.1ST
**********************************************
SEMAPHORE DIRECTIVES FOR RSX-11M EXECUTIVE
Version 01.2 May 18,1977
Last modification April 16,1980
Harry Atherton
University of Cincinnati Medical Center
Department of Pediatrics, Room 6253
231 Bethesda Ave.
Cincinnati, Ohio 45267
Phone (513) 872-5341
The files in this UIC implement binary semaphore opera-
tions in the RSX-11M executive. This software has been in
use at our installation for over two years, and it is be-
lieved to be bug free. If you have any problems, comments,
or suggestions I would like to hear them. No responsibility
is assumed for the use or reliability of this software.
***********************************************
[370,050]README.1ST
**********************************************
This area contains a software emulator for the FIS (Floating
Instruction Set) instructions (found on PDP11/40) for machines
that don't have them.
***********************************************
[370,070]README.1ST
**********************************************
Submitted by :
Robert Abramson
Digital Equipment Corp.
110 Spit Brook Road
Nashua, NH 03061
Contents:
Summary description of PDP-11 FORTRAN OTS
***********************************************
[370,130]README.1ST
**********************************************
INDEX is a FORTRAN cross referencing program. A FORTRAN source
file processed by index will be checked for all of its variable name
and label useage. The results will then be listed in alphabetical
order, listing all the variable names and labels used in the program,
the lines on which they were used, and how they were used. If needed,
the variables from specifed Fortran source files can be saved
along with those of other Fortran source files and later printed out
as a Super Index giveing variable name and the names of all the
Fortran source modules it was used in. Also included is the capability
to exclude from the index listing all variables that only appear in a
Fortran source module in a COMMON block ,Type or EQUIVALENCE
declaration but are not used elseware(or list only those if wanted).
The user can also list only those variables that are global (defined
in a common block) or those that are local. A variation of the
Super Index is available to list (almost)all entry points, the modules
that they are defined in, and all the entry points that call them and
that they call.
INDEX will handle all source files written in FORTRAN FOUR and
FORTRAN FOUR PLUS in acordance with 'PDP11 FORTRAN LANGUAGE REFERENCE
MANUAL' (DEC-11-LFLRA-C-D) and the FORTRAN 1977 standard.
INDEX can be generated to run under the RT-11 or RSX-11M
operating systems.
***********************************************
[370,140]README.1ST
**********************************************
MGT is a mag tape transfer program that allows a user to
transfer data from magtape to disk,magtape to magtape,magtape
to terminal,disk to magtape etc.
MGT DOES A BLOCK DATA TRANSFER SO NO DATA TRANSLATION IS
PERFORMED. IT CAN BE USED TO COPY ANY TAPE. IT ALSO HAS SOME
NICE BLOCKING FEATURES.
IF YOU HAVE ANY QUESTIONS OR COMMENTS, PLEASE CONTACT:
REB BURROUGHS
GENERAL DYNAMICS
P. O. BOX 748
MAIL ZONE 1189
FORT WORTH, TEXAS 76101
PHONE 817-732-4811 EXT. 4675
***********************************************
[370,352]README.1ST
**********************************************
CLE is an interactive command line editor for RSX. This is a non-privileged
task which requires no modification whatsoever to any other software. It works
with MCR, DCL, and CCL. With CLE the user is able to edit his command line
before or even after dispatching the CLI and it "remembers" the last several
commands which can be recalled, edited, and resubmitted as well. It is very
"VMS-like" though the user can toggle between "VMS mode" and "CLE mode",
changing the definitions of several <Ctrl> keys (others do not change). CLE
function keys and <Ctrl> keys are described below.
CLE function keys & <Ctrl> keys
LEFTARROW backup 1 character UPARROW backup 1 command
RIGHTARROW advance 1 character DOWNARROW advance 1 command
GOLD_LEFT backup to begin of cmd GOLD_UP backup to oldest cmd
GOLD_RIGHT advance to end of command GOLD_DOWN advance to newest cmd
^A overstrike/insert
DELETE delete 1 character left PF1 GOLD
^D delete 1 char at cursor PF2 help
^B delete to begin of cmd PF3 show status
^E delete to end of command PF4 show all commands
^R redisplay command ^K CLE/VMS <Ctrl> keys
^U cancel command ^Z exit CLE
VMS <Ctrl> keys
^D backup 1 character ^B backup 1 command
^F advance 1 character
^H backup to begin of cmd
^E advance to end of command
^A overstrike/insert
^R redisplay command ^K CLE/VMS <Ctrl> keys
^U delete to begin of cmd ^Z exit CLE
There are three options determined by assembly conditionals. If the symbol
LINE24 is defined, line 24 is is used as a status line (requires VT100/VT220
and only partially tested). OVRMOD determines whether insert mode or overstrike
mode is the default, and VMSKEY determines whether CLE <Ctrl> keys or VMS <Ctrl>
keys is the default.
You should be aware of the following problems/unexpected behaviors:
1. If a character is inserted or deleted to the left of a horizontal tab
("011) or if a tab is inserted to the left of any character, the command
line will be displayed improperly, though passed to the CLI correctly.
<CTRL-R> can be used to redisplay the command line.
2. CLE must wait for completion. So pressing <RETURN> while a command is
executing will generate a CLI prompt, not a CLE prompt. And the command
entered at the CLI prompt can not be edited.
3. CONTROL-C ABORT, under versions of RSX which support it, should be disabled
for CLE use.
4. Some kind of problem exists between CLE and SET /UIC with named directory
support. Not fully investigated.
Included in this distribution are the following files:
CLE.HLP help file, move to LB:[1,2]
CLE.MAC source file
CLE.MAK command file to assemble & taskbuild
MYMACS.MLB library containing macros such as PUSH, POP, JEQ, etc.
README.1ST this file
CLE can be installed and then invoked by typing "CLE" or you might consider
placing ".xqt CLE" in your LOGIN.CMD.
***********************************************
[370,365]README.1ST
**********************************************
Submission to Spring 87
---------- -- ------ --
RSX tape
--- ----
Submitted by: Richard Neitzel
312 Laveta Pass
Golden, CO 80401
This submission is a collection of various items that I have
accumulated over time and feel are of interest to other users. They
span a range from extremely useful to trivial. I hope that they prove
helpful to others and am interested in their reactions to them.
There are 5 major catagories of items included:
1> Routines to access and manipulate the file
structure.
2> Some SST handlers.
3> A software fix for a DL device hardware bug.
4> A undeletion utility.
5> A misc. grab bag
File routines
---- --------
These routines are described in the file FILE.DOC and the
sources are in FILES.ULB.
SSTs
----
The files are SST.DOC, SST.MAC and F77SST.FTN.
DL
--
These are in DL.DOC and DL.ULB.
Undelete
--------
The introduction is in INDEX.DOC, source in RESTORE.ULB and a
command file to build the task, INDEX.CMD.
The Grab Bag
--- ---- ---
This covers a grab-bag of items useful and playful. A quick
describtion is given of each.
WIND.FTN - This program takes input values for temperature and
wind speed and returns the wind-chill temperature.
SEARCH.FTN - This program is quite useful. The user enters in
a wildcard file specification, with optional switches that prompt him
for string to locate and the number of lines from the file to print on
the terminal, and the program then dispalys the matching files on the
terminal (up to 99 lines). The user can then go to the next file, quit
or print the current file. Modifcations to delete, move, etc. the
current file would simple to make as well.
COMPS.FTN - Where CMP fails, COMPS shines. The CMP utility
does not handle object or image files well, but COMPS does.
Differences can be directed to a terminal or file. This program is
very useful for verifying that the executable version of a file is
identical to the master for software quality assurance purposes.
BINARY.FTN - CVT, as suppiled, does not allow the conversion
of numbers or characters into a binary representation. This program,
built as ...BIN, does that. Bases 8, 10 and 16 as well as ASCII
characters are converted into a 16 digit string representing the
binary form of the number. Eight and 16 bit binary numbers can also be
coonverted, being output in all the above forms. The help file BIN.HLP
is also included.
MACLIB.ULB (OLB) - This ia a collection of assorted macro
routines that all are callable from Fortran. They perform various
functions that are either impossible from Fortran, such as performing
bit reversals or push/popping items onto the stack, or are easier and
faster in macro, such as converting lower case to upper case or
changing an odd into an even integer. To save time the object library
is also provided. The file MACLIB.DOC is a compilation of the headings
of the various entries, giving a describtion of the routines function
and calling convention.
QIO.PAR - This file is a fortran include file that provides
the necessary definitions of the i/o function codes for (wt)qio calls.
REWIND.FTN - A simple program that rewinds tape unit MS0:,
easily modified for other tapes. Informs user when tape is rewound,
nice for non-visible tapes, like cartiridges.
***********************************************
[372,004]README.1ST
**********************************************
Dear Sirs:
You will find that this tape contains a complete SOURCE
kit for SAMSTAT, our version of STAT-11. SAMSTAT has not
been modified since May of this 1979, but has been in heavy
usage at the School. This version is an initial version,
and we expect to modify it quit extensivly. It is resource
intensive. An overview of SAMSTAT is provided in the file
SSTLOG.DOC. The entire package can be installed by:
FLX /RS=MM0:[6,4]SSTGEN.CMD/DO/FA
@SSTGEN
Since SAMSTAT is written in BPR, a preprocessor for BASIC+2,
BPR has been included in this kit. This is also an 'initial
attempt' package. Partial documentaion is included in BPR.RNO.
There is an undocumented feature which might be of some help
to you, i.e., BPR file=file/RES will resequene a BASIC+2 source
file.
An overview of the package is contained in SAMSTAT.LOG.
For BPR, the ODL file produced by your BP2 compiler will have to
be modified to reference the single subroutine required. SSTGEN
should prompt you when this is necessary. An ODL file is provided
for SAMSTAT that will probably work for a system that has:
-> An FP11 <-
-> Libraries in the default UIC's <-
No core resident libraries are required...
If libraries are not in the default UIC's, the SAMSTAT.ODL file
will have to be edited to reflect their proper location.
Respectfully,
Bruce Montague
USAF/SAM/BRSO
BROOKS AFB, TX. 78235
(512)-536-3886
***********************************************
[373,001]README.1ST
**********************************************
This account contains a version of the Universal Magtape Reader
origiannly written by D. Macre in DEC Paris. A number of changes
have been made to make it more usable.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,003]README.1ST
**********************************************
This account contains a version of FRC, the utility to force a
command line to another terminal. It has been modified from
William Storey's original design to use the Spawn directive, and
so does not have to map the Executive.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,004]README.1ST
**********************************************
RENUM DISTRIBUTION KIT, NOV 79.
RENUM is a program to resequence the statement numbers in an FORTRAN
program (or set of programs) and also to provide a cross reference listing
of variable names vs. line numbers. It also produces a formatted listing
with DO loop ranges flagged in the left margin.
This version is configured for RSX11M, but should also work for D and IAS.
This version is configured for FORTRAN IV, V2.04, but should also work under
F4P.
Use FORRENUM and TKBRENUM to build the task. You may want to edit TKBRENUM.CMD
to use a resident library, etc. ICSI does the command line processing and
it uses some string routines in STRLIB. Both are written in RATFOR, a FORTRAN
pre-processor. The produced FORTRAN code is all you need for RENUM, but the
original RATFOR is included also, since the resulting FORTRAN is not easy to
understand.
If you are using F4P or the newer FORTRAN IV, with the OPEN and CLOSE
statements, you can modify the mainline program to use them and add a /SP
switch. Also, using OPEN to specify carriage control will remove the current
problem that PIP doesn't correctly understand the carriage control of the
FORTRAN source code file created by RENUM (but FORTRAN does).
The task image provided was done under RSX!!M V3.1. The object modules provided
were made with FORTRAN IV, V2.04.
If you have and problems or suggestions, call
David P. Sykes
1515 Wilson Blvd
Arlington, VA 22209
(703) 841-6086
Good Luck!
***********************************************
[373,005]README.1ST
**********************************************
This account contains RTR, a small program designed to access RSTS/E
format disks from RSX-11M, and FORMAT, another program that will
convert the output from RTR into one suitable for input to the
BASIC-PLUS-2 translator program.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,006]README.1ST
**********************************************
QUICK BUILD INSTRUCTIONS:
THE OBJECT MODULES AND TASK IMAGE PROVIDED ARE FORTRAN IV, V2.04, AND
RSX11/M, V3.2.
(SEE BLDRATFOR.CMD, A RSX11/M INDIRECT COMMAND FILE THAT DOES THE WHOLE
THING, FOR MORE INFO).
SEQUENCE IS THE SAME FOR BOTH RSX11/M AND /D BUT A COMMAND FILE THAT DOES IT
ALL IS AVAILABLE FOR /M.
COMMAND FILES SUPPLIED ARE FOR FORTRAN IV V2, BUT ONLY MINOR MODS ARE NEEDED
FOR F4P; SEE F4PRATFOR AS A SAMPLE.
COMMAND FILES ASSUME A DUMMY DEVICE NAMED XX0:. ASSIGN THIS WHEREEVER YOU
WANT BEFORE BUILDING.
THE FIRST TIME, RATFOR IS BUILT FROM THE .FTN FILES ON THIS TAPE, AFTER THAT,
WITH A WORKING VERSION OF RATFOR, YOU CAN RATFOR THE .RAT FILES TO CONFIGURE
THINGS THE WAY YOU WANT IT.
FIRST TIME YOU BUILD RATFOR--
MOVE EVERYTING ON THIS TAPE INTO UIC [314,6].
GIVE MCR THE FOLLOWING-
FOR @FORRATFOR OR F4P @F4PRATFOR
FOR @FORSTRLIB
LBR @LBRSTRLIB
TKB @TKBRATFOR
INS RATFOR
RAT @RATSAMPLE
FOR @FORSAMPLE
TKB @TKBSAMPLE
(INSTALL AND RUN SAMPLE PROGRAMS)
AFTER THE FIRST TIME--
ADD :
RAT @RATRATFOR
BEFORE THE FIRST LINE ABOVE.
IF YOU DON'T WANT TO USE UIC [314,6], EDIT THE COMMAND FILES FOR WHATEVER
UIC YOU DO WANT. ALSO EDIT TKBRATFOR.CMD FOR RESIDENT LIBRARIES.
IF YOU HAVE PROBLEMS, CALL
DAVID P SYKES
AMERICAN MANAGEMENT SYSTEMS, INC.
1515 WILSON BLVD
ARLINGTON, VA 22209
(703) 841-6086
GOOD LUCK
***********************************************
[373,007]README.1ST
**********************************************
This account contains a very simplistic program to recover a file
that has just been written. It was written in a great hurry, and
sadly never really revised, so it is rather rough and ready. Still,
it is better than nothing after you have just deleted the only copy
of a file you've spent all day editing!
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,010]README.1ST
**********************************************
This account contains SND, a generalised Send/Receive packets task
that can be very useful for checking out systems where several tasks
communicate via Send/receive packets. It was originally written by
Mike Stevenson of DEC UK and I have only made minor modifications to
it.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,011]README.1ST
**********************************************
This account contains PIN, the Procedure Interpreter designed by
James G Downward as a much smaller version of AT. I have rewritten
most of it to use file primitives (instead of FCS) and to do its own
parsing (instead of using CSI) - this has made it vastly smaller. I
have also added a 'Chain' facility.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,012]README.1ST
**********************************************
This account contains the FORTRAN Cross-Referencer XRF. I have only
modified it slightly to allow for Tabs in the input file, to allow
lowercase in the input file, and to output more meaningful error
messages (and an error count).
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,015]README.1ST
**********************************************
This account contains FIN, a small program to search a set of files
for a given string. It is copied from GREP as written by Bruce
Wright and Ray French, with only minor modifications (like the
addition of /HE), a couple of bugs corrected and the name changed
(what the hell does GREP mean?).
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,016]README.1ST
**********************************************
This account contains CVL, a small program to allow you to manipulate
the volume label of a disk, originally written by H.L. Coleman &
James Downward. I have simply tidied up a few minor bugs, added a
help facility and made the task non-privileged so that it does not
need to map the Executive.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,017]README.1ST
**********************************************
This account contains a pair of programs to produce a detailed
breakdown of what DSR is currently being used and for what. It even
attempts to follow FCB pointers through F11ACP, and usually finds
everything in pool. The only item knowingly omitted is Error Message
Blocks, which appear to be exceedingly rare.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
********************************************************************
editor's note: This program looks like it dumps on the data structures
in an RSX-11M pool. (except error blocks). Someone should see if it
knows about more data structures than the Online pool analyzer (OPA)
or the crashed pool analyzer (CPA). Maybe following FCB pointers will
help determine what files a large program (that you didn't write, but
just inherited) has opened.
**********************************************************************
***********************************************
[373,021]README.1ST
**********************************************
This account contains VCO, a program which compares two files block
by block. It is intended mainly for comparing task images or object
files. In addition it allows wildcards to be specified, thus
allowing you, in particular, to compare two whole UICs.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,024]README.1ST
**********************************************
This account contains STB, a small program for interrogating an
RSX11M.STB file to find out where various symbols are located in the
Executive. It is very useful for finding UCB addresses and suchlike.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,034]README.1ST
**********************************************
This account contains a version of BATCH which has been
modified to stop it hanging/crashing the system, and to support input
data files as well as command files. The version of VTDRV in this
account has also been modified slightly to support BATCH.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,101]README.1ST
**********************************************
This account contains the sources of the macros and subroutines in
USRLIB.OLB and USRMAC.MLB. These cover a wide variety of topics,
such as data conversion, string manipulation, and sorting. Read
USRLIB.HLP and USRMAC.HLP for details.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
*********************************************************************
editor's note: This looks like a pretty complete package.
It appears that USRLIB.HLP and USRMAC.HLP are intended to be
files that allow one to use the HELP facility to get information.
Maybe one (well I don't have time to try everything) types
HELP "subroutine name" and it gives you the calling sequence and
says something about what the subroutine does. Anyway I think its
an interesting idea to use the HELP facility to document the modules
in a subroutine library.
********************************************************************
***********************************************
[373,102]README.1ST
**********************************************
This account contains a set of subroutines to enable you to write
programs that do various aspects of screen control (e.g. cursor
positioning) without knowing or caring what sort of terminal it will
run on. See SCREEN.DOC for more details.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[373,104]README.1ST
**********************************************
This account contains the sources of the date and time subroutines in
USRLIB.OLB. These convert one one type of date or time to another,
and retrieve the current date or time in one of several forms.
From: Phil Stephensen-Payne,
c/o Systime Ltd.,
Concourse Computer Centre,
432 Dewsbury Road,
LEEDS LS11 7DF,
England.
***********************************************
[375,001]README.1ST
**********************************************
This is the contribution from 3M, as our lug is temporarily defunct.
There are 3 programs available:
a)Tcr - terminal characteristics utility
b)Tcu - the TCU clock utility
c)CDC - the EMULEX/CDC 9766 formatter
1)Tcr - the terminal characteristics utility. This program displays many
different TT characteristics for either:
a) all terminals
b) all logged in terminals
c) any single terminal
d) TI:
2)Tcu - The Digital Pathways Tcu-100 and Tcu-150 controller task.
This utility sets RSX-11M or RSX-11M/PLUS time via one the the TCU
clocks. The mechanism for setting RSX time is done via a TIME command
to MCR. The program is privileged in order to control the hardware
without a driver. Setting the TCU is done with the same syntax as a
RSX TIME command.
3)CDC - The formatter task for the Emulex/CDC 9766 "RM05"
This little routine makes use of the hardware formatting capabilities
of the EMULEX controller, and allows on line formatting similar to
DEC's FMT. Because it by-passes the DEC DR: driver, CDC makes some
validity checks before formatting.
1) you must be a privileged RSX user.
2) the disk must be dismounted.
3) The disk must be allocated.
4) The controller drive type register must return a device
code of 27, the code for a RM05.