; Edit history:
;
; [v2.28]
; Let debug packet display routines print packets with '$' in them,
; Fix timeout in inchr to work correctly
;   (from Edgar Butt, Univ. of Md.)
; Ignore packets which are too small
;   (from Greg Small, UC Berkeley)
; Added sleep routine

	public	data, spack, rpack, rpack5, portval, port1, port2, hierr
	public	prtbase, nports, port3, port4, sleep
	include msdefs.h

maxlp	equ	100		; Use as number of times to loop (in inchr).
true	equ	1
false	equ	0
mntrgl	equ	bufsiz/4	; Low point = 1/4 of the way full.
maxpack	equ	78H		; largest packet we can handle

datas	segment	public 'datas'
	extrn	flags:byte, trans:byte, pack:byte, count:word, xofsnt:byte

prtbase	label	byte
port1	prtinfo	<0FFFH,0,defpar,1,0,defhand,floxon>
port2	prtinfo	<0FFFH,0,defpar,1,0,defhand,floxon>
port3 	prtinfo	<0FFFH,0,defpar,1,0,defhand,floxon>
port4	prtinfo	<0FFFH,0,defpar,1,0,defhand,floxon>
	rept	portmax-4
	prtinfo	<0FFFH,0,defpar,1,0,defhand,floxon>
	endm

;; systems with two ports can set portval to port1 or port2.
;; systems with more than two ports can set nports higher,
;; then set portval to the address prtbase+(#-1)*size prtinfo
;; where # is the desired port.

portval	dw	port1		; Default is to use port 1.
nports	db	2		; # of known ports
hierr	db	0		; Non-ascii char (non-zero if yes).
spmes	db	'Spack:  $'
rpmes 	db	'Rpack:  $'
crlf    db      cr,lf,'$'
infms0  db	'Waiting .....$'
hibit	db	'Warning - Non Ascii char$'
cemsg	db	'User intervention$'
temp	dw	0
tmp	db	?,'$'
prvtyp  db      0               ; Type of last packet sent. [27e]
pktptr  dw	?		; Position in receive packet.
incnt	dw	?		; Number of chars read in from port.
loopct	db	?		; Loop counter.
time 	dw	?		; When we should timeout. 
	dw	?		; Want a double word.
packet  db	?,?,?,?		; Packet (data is part of it).
data	db	5AH DUP(?)	; Data and checksum field of packet.
recpkt  db	maxpack DUP(?)	; Receive packet storage (use the following).
        db      ?,?,?,?         ; Space for '$' and other stuff.  
crctab	dw	00000H
	dw	01081H
	dw	02102H
	dw	03183H
	dw	04204H
	dw	05285H
	dw	06306H
	dw	07387H
	dw	08408H
	dw	09489H
	dw	0A50AH
	dw	0B58BH
	dw	0C60CH
	dw	0D68DH
	dw	0E70EH
	dw	0F78FH

crctb2	dw	00000H
	dw	01189H
	dw	02312H
	dw	0329BH
	dw	04624H
	dw	057ADH
	dw	06536H
	dw	074BFH
	dw	08C48H
	dw	09DC1H
	dw	0AF5AH
	dw	0BED3H
	dw	0CA6CH
	dw	0DBE5H
	dw	0E97EH
	dw	0F8F7H
datas	ends

code	segment	public
	extrn	prtchr:near, clrbuf:near, outchr:near
	extrn	sppos:near, stpos:near, biterr:near, intmsg:near
	extrn	clearl:near, rppos:near, errpack:near, prtscr:near
	assume 	cs:code, ds:datas

;	Packet routines
 
; Send_Packet
; This routine assembles a packet from the arguments given and sends it
; to the host.
;
; Expects the following:
;	AH     - Type of packet (D,Y,N,S,R,E,F,Z,T)
;	ARGBLK - Packet sequence number
;	ARGBK1 - Number of data characters
; Returns: +1 always
 
SPKT	PROC	NEAR

spack: 	push ax			; Save the packet type.
        mov prvtyp,ah           ; Remember packet type. [27e]
	call clrbuf		; Clear the input buffer. [20e]
	mov bx,offset packet	; Get address of the send packet.
	mov ah,trans.ssoh	; Get the start of header char.
	mov [bx],ah		; Put in the packet.
	inc bx			; Point to next char.
	mov ax,pack.argbk1	; Get the number of data chars.
	xchg ah,al
	mov al,trans.chklen	; Length of checksum.
	dec al			; Extra length of checksum.
	add ah,' '+3		; Real packet character count made printable.
	add ah,al		; Account for checksum length in count.
	mov [bx],ah		; Put in the packet.
	inc bx			; Point to next char.
	mov ch,0		; For the 16 bit checksum.
	mov cl,ah		; Start the checksum.
	mov ax,pack.argblk	; Get the packet number.
	add al,' '		; Add a space so the number is printable.
	mov [bx],al		; Put in the packet.
	inc bx			; Point to next char.
	add cx,ax		; Add the packet number to the checksum.
	pop ax			; Get the packet type.
	mov [bx],ah		; Put in the packet.
	inc bx			; Point to next char.
	mov al,0
	xchg ah,al
	add cx,ax		; Add the type to the checksum.
	mov dx,pack.argbk1	; Get the packet size.
spack2: cmp dx,0		; Are there any chars of data?
	 jz spack3		;  No, finish up.
	dec dx			; Decrement the char count.
	mov al,[bx]		; Get the next char.
	inc bx			; Point to next char.
	mov ah,0
	add cx,ax		; Add the char to the checksum.
	cmp al,0
	jns spack2
	cmp hierr,0ffH		; Printed message already?
	je spack2		; Yes, then that's it.
	push bx
	push cx
	push dx
	call biterr
	pop dx
	pop cx
	pop bx
	mov hierr,0FFH		; set err flag. 
	jmp spack2		; Go try again.
spack3:	cmp trans.chklen,2	; What kind of checksum are we using.
	je spackx		; 2 characters.
	jg spacky		; 3 characters.
	mov ah,cl		; 1 char: get the character total.
	mov ch,cl		; Save here too (need 'cl' for shift).
	and ah,0C0H		; Turn off all but the two high order bits.
	mov cl,6
	shr ah,cl		; Shift them into the low order position.
	mov cl,ch
	add ah,cl		; Add it to the old bits.
	and ah,3FH		; Turn off the two high order bits.  (MOD 64)
	add ah,' '		; Add a space so the number is printable.
	mov [bx],ah		; Put in the packet.
	inc bx			; Point to next char.
	jmp spackz		; Add EOL char.
spacky:	mov al,0		; Get a null.
	mov [bx],al		; To determine end of buffer.
	push bx			; Don't lose our place.
	mov bx,offset packet+1	; First checksummed character.
	call crcclc		; Calculate the CRC.
	pop bx
	push cx
	mov ax,cx		; Manipulate it here.
	and ax,0F000H		; Get 4 highest bits.
	mov cl,4
	shr ah,cl		; Shift them over 4 bits.
	add ah,' '		; Make printable.
	mov [bx],ah		; Add to buffer.
	inc bx
	pop cx			; Get back checksum value.
spackx:	push cx			; Save it for now.
	and cx,0FC0H		; Get bits 6-11.
	mov ax,cx
	mov cl,6
	shr ax,cl		; Shift them bits over.
	add al,' '		; Make printable.
	mov [bx],al		; Add to buffer.
	inc bx
	pop cx			; Get back the original.
	and cx,003FH		; Get bits 0-5.
	add cl,' '		; Make printable.
	mov [bx],cl		; Add to buffer.
	inc bx
spackz:	cmp flags.debug,0	; debug mode.
	je spack4
	push bx			; save end of packet position
	call sppos
	call clearl
	mov dx,offset crlf
	mov ah,prstr
	int dos
	call clearl		; clear spack line and line below
	call sppos
	mov ah,prstr
	mov dx,offset spmes
	int dos			; print "spack:" message
	mov di,offset packet	; address of packet
	pop cx
	push cx
	sub cx,di		; calculate length of string
	call prtscr
	pop bx			; restore end of string pointer
spack4:	mov ah,trans.seol	; Get the EOL the other host wants.
	mov [bx],ah		; Put in the packet.
	inc bx			; Point to next char.
	mov ah,0		; Get a null.
	mov [bx],ah		; Put in the packet.
	call outpkt		; Call the system dependent routine.
	 jmp r
	jmp rskp
SPKT	ENDP 

;	Write out a packet.
 
OUTPKT  PROC	NEAR
	mov dh,trans.spad	; Get the number of padding chars.
outpk2: dec dh
	cmp dh,0
	jl outpk3		; If none left proceed.
	mov ah,trans.spadch	; Get the padding char.
	push dx			; save loop counter
	call outchr		; Output it.
	 pop dx
	 ret			; we failed...
	jmp outpk2
outpk3: mov bx,offset packet	; Point to the packet.
outlup: mov ah,[bx]		; Get the next character.
	cmp ah,0		; Is it a null?
	jnz outlp2
	jmp rskp
outlp2: call outchr		; Output the character.
	 jmp r
	inc bx			; Increment the char pointer.
	jmp outlup
OUTPKT  ENDP
 
; Calculate the CRC.  Returns the CRC in CX.  Destroys: BX, AX.
crcclc:	push dx
	push si
	mov dx,0		; Initial CRC value is 0.
crc0:	mov al,[bx]		; Get the first char of the string.
	cmp al,0		; If null, then we're done.
	je crc1
	inc bx
	xor al,dl		; Xor input with lo order byte of CRC.
	mov ah,al		; Get a copy.
	and ah,0F0H		; Get hi 4 bits.
	mov cl,4
	shr ah,cl		; Right justify.
	and al,0FH		; Get lo 4 bits.
	push bx
	mov si,offset crctb2	; Low portion of CRC factor.
	mov bh,0
	mov bl,al
	add bl,al		; Get word index.
	mov cx,[si+bx]		; Low portion.
	mov si,offset crctab	; High portion of CRC factor.
	mov bh,0
	mov bl,ah
	add bl,ah		; Get word index.
	mov bx,[si+bx]
	xor bx,cx		; Add the two.
	mov cl,8
	shr dx,cl		; Shift CRC 8 bits to the right.
	xor dx,bx		; XOR table value and CRC.
	pop bx			; Retrieve index.
	jmp crc0
crc1:	mov cx,dx		; Return it in CX.
	pop si
	pop dx
	ret

; Receive_Packet
; This routine waits for a packet arrive from the host.  It reads
; chars until it finds a SOH.

RPACK	PROC	NEAR
rpack5: call inpkt		; Read up to a carriage return.
	 jmp r			;  Return bad.
rpack0: call getchr		; Get a character.
	 jmp r			;  Hit the carriage return, return bad.
	cmp al,trans.rsoh	; Is the char the start of header char?
	 jne rpack0		;  No, go until it is.
rpack1: call getchr		; Get a character.
	 jmp r			;  Hit the carriage return, return bad.
	cmp al,trans.rsoh	; Is the char the start of header char?
	 jz rpack1		;  Yes, then go start over.
	mov ch,0		; For 16-bit checksum.
	mov cl,al		; Start the checksum.
	mov ah,0
	mov pack.argbk1,ax	; Save the data count.
	call getchr		; Get a character.
	 jmp r			;  Hit the carriage return, return bad.
	cmp al,trans.rsoh	; Is the char the start of header char?
	 jz rpack1		;  Yes, then go start over.
	mov ah,0
	add cx,ax		; Add it to the checksum.
	sub al,' '		; Get the real packet number.
	mov ah,0
	mov pack.argblk,ax	; Save the packet number.
	call getchr		; Get a character.
	 jmp r			;  Hit the carriage return, return bad.
	cmp al,trans.rsoh	; Is the char the start of header char?
	 jz rpack1		;  Yes, then go start over.
	mov ah,0
	mov temp,ax		; Save the message type. [11]
        mov bp,portval          ; Point to current port structure. [27e]
        cmp ds:[bp].ecoflg,0    ; Is the host echoing? [27e]
        jne rpak11              ; No, packets not echoed. [27e]
        cmp al,prvtyp           ; Packet type same as last sent? [27e]
        je rpack5               ; Yes, chuck echoed packet. [27e]
rpak11:	add cx,ax		; Add it to the checksum.
; Start of change.
; Now determine block check type for this packet.  Here we violate the layered
; nature of the protocol by inspecting the packet type in order to detect when
; the two sides get out of sync.  Two heuristics allow us to resync here:
;   a. An S packet always has a type 1 checksum.
;   b. A NAK never contains data, so its block check type is LEN-2. 
	push cx
	mov cl,al
	mov ax,pack.argbk1	; Get back the size.
	sub al,34		; unchar(len) - 2, for SEQ & TYPE fields.
	mov ah,trans.chklen	; Checksum length we expect.
	cmp cl,'S'		; Is this an "S" packet?
	jne rpk0		; Nope.
	mov ah,1		; Yes, use 1 char checksum.
rpk0:	cmp cl,'N'		; Is this a NAK?
	jne rpk1		; Nope.
	mov ah,al		; So, len - 2 is checksum type.
rpk1:	mov trans.chklen,ah	; Then, this is the chksum length.
	sub al,ah		; Real size of data.
	mov dh,al		; Need it here.
	mov ah,0
	mov pack.argbk1,ax	; And here.
	pop cx	
; End of change.
	mov bx,offset data	; Point to the data buffer.
rpack2: dec dh			; Any data characters?
	 js rpack3		;  If not go get the checksum.
	call getchr		; Get a character.
	 jmp r			;  Hit the carriage return, return bad.
	cmp al,trans.rsoh	; Is the char the start of header char?
	 jnz rpak2a
	jmp rpack1		;  Yes, then go start over.
rpak2a:	mov [bx],al		; Put the char into the packet.
	inc bx			; Point to the next character.
	mov ah,0
	add cx,ax		; Add it to the checksum.
	jmp rpack2		; Go get another.
rpack3: call getchr		; Get a character.
	 jmp r			;  Hit the carriage return, return bad.
	cmp al,trans.rsoh	; Is the char the start of header char?
	 jnz rpk3x
	 jmp rpack1		;  Yes, then go start over.
rpk3x:	sub al,' '		; Turn the char back into a number.
	cmp trans.chklen,2	; What checksum length is in use.
	je rpackx		; Two character checksum.
	jg rpacky		; Three character CRC.
	mov dh,cl		; 1 char - get the character total.
	and dh,0C0H		; Turn off all but the two high order bits.
	mov ch,cl
	mov cl,6
	shr dh,cl		; Shift them into the low order position.
	mov cl,ch
	add dh,cl		; Add it to the old bits.
	and dh,3FH		; Turn off the two high order bits.  (MOD 64)
	cmp dh,al		; Are they equal?
	 jz rpack4		; If so finish up.
	jmp rpack6		; No, we fail.
rpacky:	mov tmp,al		; Save value from packet here.
	mov ah,0		; Three character CRC.
	push bx
	mov bx,pktptr		; Where we are in the packet.
	dec bx
	mov [bx],ah		; Add null to signify end of buffer.
	mov bx,offset recpkt+1	; Where data for CRC is.
	call crcclc		; Calculate the CRC and put into CX.
	pop bx
	push cx
	mov ax,cx		; Manipulate it here.
	and ax,0F000H		; Get 4 highest bits.
	mov cl,4
	shr ah,cl		; Shift them over 4 bits.
	pop cx			; Get back checksum value.
	cmp ah,tmp		; Is what we got == what we calculated?
	jne rpack6
	call getchr		; Get next character of checsum.
	 jmp r			; Failed.	
	cmp al,trans.rsoh	; Restarting?
	 jz rpack7
	sub al,' '		; Get back real value.
rpackx:	mov tmp,al		; Save here for now.
	push cx			; Two character checksum.
	and cx,0FC0H		; Get bits 6-11.
	mov ax,cx
	mov cl,6
	shr ax,cl		; Shift them bits over.
	pop cx			; Get back the original.
	cmp al,tmp		; Are they equal?
	 jne rpack6		; No, we fail.
	call getchr		; Get last character of checsum.
	 jmp r			; Failed.	
	cmp al,trans.rsoh	; Restarting?
	 jz rpack7
	sub al,' '		; Get back real value.	
	and cx,003FH		; Get bits 0-5.
	cmp al,cl		; Do the last chars match?
	jne rpack6
rpack4: mov ah,0
	mov [bx],ah		; Put a null at the end of the data.
	mov ax,temp		; Get the type.   [11]
	xchg al,ah		; Packet type should be in AH.
	jmp rskp
rpack6:	ret
rpack7:	jmp rpack1		; For the jump out of range.
RPACK	ENDP
 
 
INPKT	PROC	NEAR
	mov bl,flags.cxzflg	; Remember original value. [20b]
	mov tmp,bl		; Store it here. [20b]
inpkt0:	call inchr		; Get a character. [27a]
	 jmp inpkt8		;  Return failure. [27a]
	 nop			;  Make it three bytes long. [27a]
	cmp ah,trans.rsoh	; Is it SOH char? [27a]
	jne inpkt0		; No hold out for SOH. [27a]
inpkt1:	mov bx,offset recpkt	; Point to the beginning of the packet.
	mov incnt,0
	mov [bx],ah		; Add SOH to buffer. [27a]
	inc bx			; Increment pointer. [27a]
	inc incnt		; Increment counter. [27a]
inpkt2:	call inchr		; Get a character.
	 jmp inpkt8		;  Return failure. [20b]
	 nop			;  Make it three bytes long. [20b] 
	cmp ah,trans.rsoh	; Starting over again? [27a]
	je inpkt1
	mov [bx],ah		; Put the char in the packet.
	inc bx
	inc incnt
	cmp ah,trans.reol	; Is it the EOL char?
	je inpkt3		; ended by eol, keep going
	cmp incnt,maxpack	; is it too big?
	jbe inpkt2		; no, keep going
	jmp inpkt1		; else just start over
inpkt3:	cmp incnt,5		; Ignore packets which are too small
	jbe inpkt0
	mov bp,portval
	cmp ds:[bp].hndflg,0	; Waiting for handshake?
	jz inpkt5		; If not then proceed.
inpkt4: call inchr		; Wait for the turn around char.
	 jmp inpkt8		;  Return failure. [20b]
	 nop			;  Make it three bytes long.  [20b]
	cmp ah,trans.rsoh	; Start of packet? [27a]
	je inpkt1		; Yes go start over. [27a]
	mov bp,portval
	cmp ah,ds:[bp].hands	; Is it the IBM turn around character?
	jne inpkt4		; If not, go until it is.
inpkt5:	cmp flags.debug,0	; In debug mode?
	je inpkt6
        push bx                 ; save character pointer
        call rppos
        call clearl
        mov dx,offset crlf
        mov ah,prstr
        int dos
        call clearl             ; clear debug line and line beneath
        call rppos              ; Reposition cursor.
        mov ah,prstr
        mov dx,offset rpmes
        int dos
        mov di,offset recpkt	; buffer address
        pop cx
        sub cx,di		; length of buffer
        call prtscr             ; display packet
inpkt6:	mov bx,offset recpkt
	mov pktptr,bx		; Save the packet pointer.
	mov bl,tmp		; Get the original value. [20b]
	cmp bl,flags.cxzflg	; Did ^X/^Z flag change? [20b]
	je inpkt7		; If not, just return.  [20b]
	cmp flags.cxzflg,'E'	; Error packet?
	je inpkt9
	call intmsg 		; Else, say we saw the interrupt. [20b]
inpkt7: jmp rskp		; If so we are done.
inpkt8:	cmp flags.cxzflg,'C'	; Did the user type a ^C? [25]
	jne inpkt9
	mov pack.state,'A'
	ret
inpkt9:	cmp flags.cxzflg,'E'	; How about ^E?
	jne inpk10		; No just go on.
	mov bx,offset cemsg	; Null message for error packet.
	call errpack
	mov pack.state,'A'
	ret
inpk10:	mov bl,tmp		; Get the original value. [20b]
	cmp bl,flags.cxzflg	; Did ^X/^Z flag change? [20b]
	je inpk11		; If not, just return failure.  [20b]
	call intmsg 		; Else, say we saw the interrupt. [20b]
inpk11:	jmp r
INPKT	ENDP

; sleep for the # of seconds in al
sleep	proc	near
	saveac	<bx,cx,dx>
	push	ax		; save argument
	mov	ah,gettim
	int	dos		; get current time
	pop	bx		; restore desired # of seconds
	add	dh,bl		; add # of seconds
sleep1:	cmp	dh,60		; too big for seconds?
	jb	sleep2		; no, keep going
	sub	dh,60		; yes, subtract a minute
	inc	cl		; and make up for it here
	cmp	cl,60		; did minutes overflow?
	jb	sleep1		; no, check seconds again
	sub	cl,60		; else take away an hour
	inc	ch		; add it back here
	jmp	sleep1		; and keep checking
sleep2:	mov	time,cx
	mov	time+2,dx	; store desired ending time
sleep3:	mov	ah,gettim	; get time
	int	dos		; bug dos
; adjust time when times are before and after midnight.
	cmp	ch,0		; is ending time between 0:00 and 1:00?
	jne	sleep4		; no, keep going
	cmp	byte ptr time+1,23 ; is desired time after 23:00?
	jne	sleep4		; no, go on
	mov	ch,24		; otherwise set current hour to 24
sleep4:	cmp	cx,time		; check hours and minutes
	jb	sleep3
	ja	sleep5		; over limit, time to exit
	cmp	dx,time+2	; same, check seconds and fraction
	jb	sleep3		; below, keep looking
sleep5:	ret			; else just return
sleep	endp


inchr:	cmp flags.timflg,0	; Are timeouts turned off.
	je inchr1		; Yes, so skip this stuff.
	cmp trans.stime,0	; Don't time out?
	je inchr1		; Yes, so skip this stuff.
	mov loopct,0		; Use to check for timeout.
	mov ah,gettim		; Get the time.
	int dos
	add dh,trans.stime	; add timeout to seconds
inch01:	cmp dh,60		; seconds overflowed?
	jb inch02		; no, break loop
	sub dh,60
	inc cl			; add one minute
	cmp cl,60		; did this make minutes overflow?
	jb inch01		; no, check seconds again (should just divide)
	sub cl,60
	inc ch			; add one hour
	jmp inch01		; and check seconds again
inch02:	mov time,cx
	mov time+2,dx		; store ending time now.
inchr1:	call prtchr		; Is there a character to read?
	 jmp inchr6		; Got one.
	mov dl,0FFH		; To read in a char.
	mov ah,dconio		; Is a char on the console?
	int dos
	jz inchr2		; If not go look for another char.
	mov ah,al 
	cmp ah,cr		; Is it a carriage return?
	je inchr5		; If yes, then leave.
	cmp ah,'Z'-100O		; Control-Z? [20b]
	je inchr4		; Yes - flag it. [20b]
	cmp ah,'X'-100O		; Control-X? [20b]
	je inchr4		; Yes - flag it. [20b]
	cmp ah,'E'-100O		; Control-E?
	je inchr4		; Flag it and get rest of packet.
	cmp ah,'C'-100O		; Control-C? [25]
	jne inchr2		; No, then wait for input. [25]
	add ah,100O		; Make it printable. [25]
	mov flags.cxzflg,ah	; Save it. [25]
	ret			; Return right away. [25]
inchr2:	cmp flags.timflg,0	; Are timeouts turned off?
	je inchr1		; Yes, just check for more input.
	cmp trans.stime,0	; Doing time outs?
	je inchr1		; No, just go check for more input.
	inc loopct
	cmp loopct,maxlp	; Times to go without checking time.
	jne inchr1		; Don't check yet.
	mov ah,gettim		; Get the current time.
	int dos
; adjust time when times are before and after midnight
; note: this won't work for timeouts which start before
; midnight and are more than an hour (not likely!).
	cmp ch,0		; is ending time between 00:00 and 1:00?
	jne inch21		; no, can just compare times
	cmp byte ptr time+1,23	; is desired hour after 23:00?
	jne inch21		; no, just compare them
	mov ch,24		; otherwise set current hour to 24 for wrap
inch21:	cmp cx,time		; check hours and minutes
	jb inchr3		; under limit, keep looking
	ja inchr5		; over limit, time out
	cmp dx,time+2		; same, compare seconds and fraction
	jae inchr5		; over limit, time out
; fall thru if time hasn't occurred yet.
inchr3:	mov loopct,0		; Reset counter.
	jmp inchr1
inchr4: add ah,100O		; Make it printable. [20b]
	mov flags.cxzflg,ah	; Remember what we saw. [20b]
	jmp inchr2		; Continue getting input. [20b]
inchr5:	ret
inchr6: mov ah,al
	mov bp,portval		; Point to current port structure.
	cmp ds:[bp].parflg,parnon	; Is the parity none?	[10]
	je inchr7		; We're done.		[10]
	and ah,7FH		; Turn off the parity bit.
inchr7:	cmp ds:[bp].floflg,0	; Doing any flow control?
	jne inchr8		; Yes, check it out.
	jmp rskp		; No, just return the data.
inchr8:	cmp xofsnt,true		; Have we sent flow char (XOFF)?
	je inchr9		; Yes.
	jmp rskp		; No, just return.
inchr9:	cmp count,mntrgl	; Under the low trigger point?
	jb inchra		; Yes.
	jmp rskp		; No, just return.
inchra:	push ax
	mov bp,portval
	mov ax,ds:[bp].flowc	; Get flow control char (AH = XON, AL = XOFF).
	call outchr		; Send it (XON).
	mov xofsnt,false	; Turn off the flag.
	pop ax
	jmp rskp		; Return the character.

; Return next character in AL.
GETCHR  PROC	NEAR
	push bx
	mov bx,pktptr		; Get the packet pointer.
	mov al,[bx]		; Get the char.
	inc bx
	mov pktptr,bx
	pop bx			; Restore BX.
	cmp al,trans.reol	; Is it the EOL char?
	jne getcr2		; If not return retskp.
	ret			; If so return failure.
getcr2: jmp rskp
GETCHR  ENDP

; Jumping to this location is like retskp.  It assumes the instruction
;   after the call is a jmp addr.
 
RSKP	PROC	NEAR
	pop bp
	add bp,3
	push bp
	ret
RSKP	ENDP
 
; Jumping here is the same as a ret.
 
R	PROC	NEAR
	ret
R	ENDP

code	ends
	end
