 SHOW thing

 The SHOW command can be used to show something. The following things
 can be shown with this command:

 ACCOUNTING	ASSIGNMENTS	GROUPFLAGS	QUEUE	LIBRARY
 CLOCK_QUEUE  	SYSTEM		COMMON		MEMORY	TASKS
 DEFAULT	TERMINAL	DEVICES		PARTITIONS
 [DAY]TIME	PROCESSOR	USERS

 Abbreviation: S
2 ACCOUNTING

 SHOW ACCOUNTING/INFORMATION ddnn:

 SHOW ACCOUNTING/TRANSACTIONS[:infile] outfile

 The SHOW ACCOUNTING command displays either current accounting data for
 a terminal or historical accounting data showing system activity.

 The SHOW ACCOUNTING/INFORMATION command displays current accounting
 data for a logged-in terminal. A non-privileged user can only
 show accounting information about his own terminal activity.  

 The SHOW ACCOUNTING/TRANSACTIONS command dumps the current account-
 ing transaction file to the specified output file. The optional input
 file argument can be used to specify a transaction file other
 than the currently active one. This is a privileged command.

 See HELP ACCOUNTING for more information on Resource Accounting, 
 including the following commands, START ACCOUNTING, STOP ACCOUNTING,
 and SET ACCOUNTING.

2 ASSIGNMENTS

 SHOW ASSIGNMENTS[/qualifier]

 		Qualifiers

		  /GLOBAL
		  /LOCAL
		  /LOGIN
		  /TERMINAL:ttnn:

 The SHOW ASSIGNMENTS command shows displays the local and login logical
 assignments pertaining to your terminal.

 The /GLOBAL qualifier specifies that all global, local and login
 assignments throughout the entire system be displayed.

 The /LOCAL qualifier shows all local assignments and is the default.

 The /LOGIN qualifier specifies that only login assignments pertaining to
 your terminal be displayed.

 The /TERMINAL argument, when used either alone, or in conjunction with
 /LOGIN, specifies that logical assignments pertaining to another ter-
 minal be displayed. Since /GLOBAL displays all assignments throughout
 the entire system, the combination of it and /TERMINAL is meaningless.

2 CLOCK_QUEUE

 SHOW CLOCK_QUEUE

 The SHOW CLOCK_QUEUE command displays information about tasks currently
 in the clock queue. The information consists of the task names, the
 next time each task is to be run, and each task's reschedule interval,
 if one was specified.
 
2 COMMON_BLOCK_DIRECTORY

 SHOW COMMON[:name][/TASKS]

 The SHOW COMMON command on RSX-11M-PLUS systems displays the names of the
 resident commons installed in the system, their PCB addresses, the
 number of attached tasks, and the status of the common.

 The optional name argument specifies that information should only
 be displayed for the named common.

 The optional /TASK qualifier, when used in conjunction with a 
 commonname, specifies that the list of attached tasks should also be 
 displayed.
2 DAYTIME
#TIME
2 DEFAULTS

 SHOW DEFAULTS

 The SHOW DEFAULTS command displays the current assignment of logical 
 name SY: and the default UFD for the terminal.
2 DEVICES

 SHOW DEVICES[:dd][/qualifier]

	Qualifiers

       /[NO]PUBLIC
       /WIDTH:ddnn:

 The SHOW DEVICES command displays a list of the symbolic names of all
 of the devices in the system. The device names appear in one column;
 the second and subsequent columns contain additional information (when
 necessary) about each device.

 If you include the argument dd, only devices of that particular type
 are included in the display.  dd is the device identifier, such as DK or
 DB.
3 NOPUBLIC
#PUBLIC
3 PUBLIC

 SHOW DEVICES/PUBLIC
 SHOW DEVICES/NOPUBLIC

 The /PUBLIC qualifier specifies that only a list of public devices be
 generated.

 The /NOPUBLIC qualifier specifies that only a list of private devices be
 generated.
3 WIDTH

 SHOW DEVICES WIDTH:ddnn:

 The WIDTH keyword specifies that rather than displaying a list of devi-
 ces, the buffer size of the specified device is to be displayed.

2 GROUPFLAGS

 SHOW GROUPFLAGS

 The SHOW GROUPFLAGS command displays a list of the group global event
 flags currently in existence. 

	>SHOW GROUPFLAGS
	201	1	000000 000000
	303	1	000000 000000
	333	1	000000 000000

 The first column is the group number for the flags.  The second is
 the access count.  The two 6-digit numbers are the octal words that 
 give the current state of each group global event flag.  Group global 
 event flags are global event flags 65 through 80.  The first octal word
 starts at flag 80 and goes to the right to flag 65.  The second octal
 word starts at flag 96 and goes to the right to flag 81.  
2 LIBRARY

 SHOW LIBRARY[/DIRECTORY]

 The SHOW LIBRARY command displays the current library UFD. This is
 the UFD where the nonprivileged system utility programs are to be
 found on RSX-11M-PLUS systems.  Such tasks are found in the system directory
 on RSX-11M systems.  The /DIRECTORY qualifier is a no-op.

 See also HELP SHOW SYSTEM DIRECTORY.

 To run a program from this library, you can type RUN $filename.
2 MEMORY

 SHOW MEMORY

 The SHOW MEMORY command invokes the resource monitor display (RMD)
 system utility program. This program displays in a graphic manner the
 status of much of the system. Certain keys are active during the
 display. Pressing "H" (HELP) will list them.

 Type a CTRL-Z to exit from the display.

 The RMD program is useful for monitoring the general activity of the
 system. It is also useful for a new user to watch to gain some insight
 into how the RSX-11M/M-PLUS operating system operates. However, the user
 must be cautioned that the graphic display is very approximate and can
 not be used for critical measure.  

 For other functions of RMD, see HELP SHOW TASKS DYNAMIC.
2 PARTITIONS

 SHOW PARTITIONS[:parname]

 The SHOW PARTITIONS command displays address and content information
 about the partitions of the system. The optional partition name can be
 used to limit the display to one particular partition.

 When all partitions in the system are displayed, the format of the
 display is as follows:

	parname pcbaddr baseaddr parsize MAIN

 possibly followed by one or more lines describing the contents of the
 subpartition, whose format is as follows:

		pcbaddr baseaddr parsize partype contentname

 When only one partition is listed the format of the display is as
 follows:

	PAR=parname:baseaddr:parsize:SYS

 The address and size fields of the single partition display are 32-word
 values, while they are byte values in the multiple partition display.
2 PROCESSOR
@DCLSHOWP
2 QUEUE
@DCLSHOWQ
2 SYSTEM
 SHOW SYSTEM[/qualifier]

	Qualifier

	/CLI
	/DIRECTORY 	
	/EXTENSION_LIMIT
	/PACKETS
	/POOL
	/SECONDARY_POOL
	
 The SHOW SYSTEM command displays information about the current system.
3 PACKETS

 SHOW SYSTEM/PACKETS

 Normally, some number of 18-word I/O packets are set aside in pool and
 retained in a separate queue for use by the QIO directive. This number
 of packets (refered to as MAXPKT) is used to optimize the servicing of
 QIO requests.

 The SHOW SYSTEM/PACKETS command displays the maximum number and the current
 number of available I/O packets in the format:

 	MAXPKT=m.:c.

 where "m" is the maximum number of and "c" is the current number of
 available I/O packets.
3 CLI

 SHOW SYSTEM/CLI

 The /CLI qualifier displays information about the command line interpreters
 currently on the system.
3 DIRECTORY

 SHOW SYSTEM/DIRECTORY

 The SHOW SYSTEM/DIRECTORY command displays the current system UFD. This is
 the UFD where the system image and privileged system utility programs
 are to be found on RSX-11M-PLUS systems.  All system tasks are found here
 on RSX-11M systems.
 To run a program from this library, you can type RUN $filename.
3 POOL

 SHOW SYSTEM/POOL

 The SHOW SYSTEM/POOL command displays the current status of the system
 dynamic pool as three numbers, top:max:total, where "top" is the
 current top of memory, "max" is the largest contiguous block of pool in
 64.-byte blocks, and "total" is the total amount of pool in 64.-byte
 blocks.  See also HELP SHOW MEMORY.
3 EXTENSION_LIMIT

 SHOW SYSTEM/EXTENSION_LIMIT

 The SHOW SYSTEM/EXTENSION_LIMIT command displays the maximum size to which a
 task can extend itself by means of the EXTEND TASK system directive. 
3 SECONDARY_POOL

 SHOW SYSTEM/SECONDARY_POOL

 The SHOW SYSTEM/SECONDARY_POOL command on RSX-11M-PLUS systems displays 
 information about secondary pool.  The display is in the following 
 format:

	SECPOL=lrg:tot:pct

 where lrg is the size of the largest block of available secondary pool in
 32.-word blocks, tot is the total amount of free space in secondary pool 
 in 32.-word blocks and pct is the percentage of pool in use.
2 TASKS
 SHOW TASKS[:taskname]/qualfier[s]
 
 	Qualifiers

	/ACTIVE[:ttnn:]
	/INSTALLED
	/LOGICAL_UNITS

 The SHOW TASKS command displays information about active and installed tasks.

 See also 
	HELP SHOW TASKS ACTIVE 
	HELP SHOW TASKS ACTIVE FULL
	HELP SHOW TASKS INSTALLED
	HELP SHOW TASKS DYNAMIC
	HELP SHOW TASK FLAGS
	HELP SHOW TASK LOGICAL_UNITS
3 ACTIVE

 SHOW TASKS[:taskname][/qualifier]/ACTIVE[:ttnn:] 
		      [/BRIEF]
		       /ALL
	
 With the /BRIEF qualififier, which is the default, SHOW TASKS/ACTIVE lists 
 the names of tasks active on your terminal. The ttnn: argument specifies that
 it is the list of tasks active on another terminal that should be dis-
 played. The /ALL qualifier specifies that a list of all active tasks in
 the system be displayed.  On RSX-11M systems, the brief format includes 
 task names only.
 
 See also HELP SHOW TASKS ACTIVE FULL.
4 FULL
 SHOW TASKS[:taskname]/ACTIVE/FULL 

 The full format of the SHOW TASKS/ACTIVE command displays a detailed
 list of the disposition of all of the active tasks in the system. The
 optional task name allows you to show this information for a single
 task. The format of the display is as follows:

 taskname tcbaddr parname pcbaddr taskaddrlimits priority def.priority
    STATUS: statusflags
    TI - ddnn: IOC - iocount  EFLG - eventflags  PS - pswval  PC - pcval
    REGS 0-6

3 FLAGS
 Here are the task status flags included in various system displays.
 
 Status Flag   TCB Flag	  Meaning

 ABO		T2.ABO	Being aborted
 ACP		T3.ACP	Ancillary Control Processor
 AST		T2.AST	AST state
 BLK		TS.STP	Blocked externally by CLI command
 CAF		T2.CAF	Dynamic checkpointing allocation failure
 CAL		T3.CAP	Checkpoint space allocated in task image
-CHK		TS.CHK	Not checkpointable
 CIP		TS.CIP	Blocked for checkpoint in progress (RSX-11M-PLUS only)
 CKD		TS.CKD  Checkpointing disabled
 CKP		TS.CKP	Checkpointed (RSX-11M-PLUS only)
			Checkpoint in progress or checkpointed (RSX-11M only)
 CKR		TS.CKR	Checkpoint request pending
 CLI		T3.CLI	Command Line Interpreter
 DST		T2.DST	ASTs disabled
-EXE		TS.EXE	Not executing
 FXD		T2.FXD	Fixed in memory
 GFL		T3.GFL	Task has own group global event flags locked
 HLD		TS.HLD	Half-loaded, awaiting pool for task header
 HLT		T2.HLT	Being terminated
 MCR		T3.MCR	Activated by MCR
 MSG		TS.MSG	Aborted, waiting for TKTN message
 NET		T3.NET	Network protocol level
 NSD		T3.NSD	Cannot receive data (no send data allowed)
-PMD		T3.PMD	Suppress PMD on SST abort
 OUT		TS.OUT	Out of memory
 PRV		T3.PRV	Privileged
 RDN		T3.RDN  I/O being run down
 REM		T3.REM	Remove on exit
 ROV		T3.ROV	Resident overlays
 RST		T3.RST	Restricted - used by layered software
 SEF		T2.SEF	Stopped for event flag
 SLV		T3.SLV	Slaved
 SPN		T2.SPN	Being suspended
 SPNA		T2.SPN	Suspended prior to AST
 STP		T2.STP	Stopped
 STPA		T2.STP	Stopped prior to AST
 SWS		T3.SWS	Reserved for software services
 REX		T2.REX	Abort AST effected or in progress
 WFR		T2.WFR	In a wait-for state
 WFRA		T2.WFR	In a wait-for state prior to AST
3 INSTALLED

 SHOW TASKS[:taskname]/INSTALLED[/qualifier]
				/BRIEF
				/FULL

 The brief format of the SHOW TASKS/INSTALLED command displays a short
 format list of all of the installed tasks in the system. The format of
 the display is as follows:

	taskname  ident  parname  priority  startaddr 

 The full format of the SHOW TASKS/INSTALLED command displays a detailed
 list of the disposition of all of the installed tasks in the system.
 The format of the display is as follows:

 taskname tcbaddr parname pcbaddr taskaddrlimits priority def.priority
    STATUS: statusflags
    TI - ddnn:  IOC - iocount  EFLG - eventflags

3 LOGICAL_UNITS

 SHOW TASK:taskname/LOGICAL_UNITS 

 The SHOW TASK/LOGICAL_UNITS command displays the static logical unit number 
 (LUN) assignments for an installed task.
3 DYNAMIC
 The /DYNAMIC qualifier to SHOW TASKS invokes the RMD display to show 
 continuing changes in a task's  header or in the active task list.  On a
 video terminal, the display changes regularly.  On a hard-copy terminal,
 the display is a snapshot.

 SHOW TASK:taskname/DYNAMIC[/qualifier[s]]
			    /RATE:n

 With a task name included, the SHOW TASK:taskname/DYNAMIC command displays
 task-header information.  The /RATE qualifier allows you to change the rate
 in seconds at which the display changes.

 SHOW TASKS/ACTIVE/DYNAMIC[/qualifier[s]]
			   /OWNER:ttnn:
				  ALL
			   /PRIORITY:n
			   /RATE:n

 With the /ACTIVE qualifier included, the SHOW TASK/ACTIVE/DYNAMIC command
 displays all or part of the active task list.  The default is to show all
 active tasks.  The /OWNER qualifier permits you to display only active
 tasks running from a particular terminal.  The /PRIORITY qualifier allows
 you to set the highest priority to display.  The /RATE qualifier allows you 
 to change the rate in seconds at which the display changes.

2 TERMINAL

 SHOW TERMINAL[:ttnn:][/qualifier]

 The SHOW TERMINAL command shows how various attributes of terminals are
 set.

 The SHOW TERMINAL command without any qualifier shows all the attributes of
 your terminal.  If you name another terminal in the command, all of its
 attributes are displayed in the following format:

TTnn:	[303,12]		[303,12]
	CLI   = DCL	BUF   = 132.	HFILL = 0	SPEED=(300,300)
	LINES = 66.	TERM =  LA36	OWNER = SELF	BRO	NOABAUD
	LOWER   NOPRIV	NOHOLD  NOSLAVE NOESC   NOCRT   NOHFF	NOREMOTE
	ECHO	NOVFILL	NOHHT	NOFDX	WRAP	NORPA	NOEBC	TYPEAHEAD

 For a list of the commonly used attributes, see HELP SHOW TERMINAL
 COMMON_USE.

 For a list of the terminal setup attributes, see HELP SHOW TERMINAL
 TERMINAL_SETUP.

 The task setup attributes are attributes that can need to be set for
 certain user tasks to execute properly. For a list of task setup
 attributes, see HELP SHOW TERMINAL TASK_SETUP.

 For more information on a particular attribute, type HELP SHOW TERMINAL
 attribute.
3 NOBROADCAST
#BROADCAST
3 BROADCAST

 SHOW TERMINAL/[NO]BROADCAST

 This command lists all terminals on the system that accept [or do not]
 accept messages from the BROADCAST command.
3 COMMON_USE

 SHOW TERMINAL/attribute

 The following keywords show terminal characteristics that are regularly
 needed by the average terminal user. For more information on a parti-
 cular characteristic, type HELP SHOW TERMINAL characteristic.

	/DCL
	/[NO]HOLD_SCREEN
	/LOWERCASE
	/MCR
	/[NO]PRIVILEGED
	/SPEED:(t,r)
	/UPPER_CASE
3 DCL

 SHOW TERMINAL/DCL

 The SHOW TERMINAL/DCL command displays a list of the DCL terminals in
 the system.
  
 See also HELP SHOW SYSTEM CLI 

 To change from a DCL terminal to an MCR terminal, issue the command SET
 TERMINAL/MCR.

 To change from an MCR terminal to a DCL terminal, issue the command
 SET /DCL=TI:.
3 ECHO
#NOECHO
3 EIGHT_BIT
#NOEIGHT_BIT
3 ESCAPE
#NOESCAPE
3 FORM_FEED
#NOFORM_FEED
3 FULL_DUPLEX
#NOFULL_DUPLEX
3 HARDCOPY
#SCOPE
3 HFILL
#CRFILL
3 CRFILL
 SHOW TERMINAL[:ddnn:]/CRFILL

 The SHOW TERMINAL/CRFILL command displays the number of horizontal fill
 characters generated for your terminal. A privileged user can show the
 number of horizontal fill characters for any terminal in the system.
 /HFILL is a synonym.

 Horizontal fill characters are null characters sent to the terminal
 after a carriage return to accomodate the different return speeds of
 different terminal models. Many terminal models perform a mechanical
 carriage return slow enough that the next "n" characters sent to the
 terminal will be lost. Adding null characters in prevents this from
 happening.
3 HOLD_SCREEN
#NOHOLD_SCREEN
3 INTERACTIVE
#PASSALL
3 LOCAL
#REMOTE
3 LOWERCASE
#UPPERCASE
3 MCR

 SHOW TERMINAL/MCR

 The SHOW TERMINAL/MCR command displays a list of the MCR terminals in
 the system. 

 See also HELP SHOW SYSTEM CLI.

 To change from a DCL terminal to an MCR terminal, issue the command SET
 TERMINAL/MCR.

 To change from an MCR terminal to a DCL terminal, issue the command
 SET /DCL=TI:.
3 MODEL

 SHOW TERMINAL[:ddnn:]/MODEL

 The SHOW TERMINAL MODEL command shows you what model of terminal the
 system thinks you are using. If this information is not correct, you
 should correct it with the SET TERMINAL command. Some system tasks use
 this information and therefore it should be correct.  
3 NOECHO

 SHOW TERMINAL/ECHO
 SHOW TERMINAL/NOECHO

 The SHOW TERMINAL/[NO]ECHO command lists the terminals in the system
 that are set to [set not to] echo input typed on them. Most terminals
 will be set to echo.
3 EBC
#NOEIGHT_BIT
3 NOEIGHT_BIT

 SHOW TERMINAL/EIGHT_BIT
 SHOW TERMINAL/NOEIGHT_BIT

 The SHOW TERMINAL/[NO]EIGHT_BIT command lists the terminals in the
 system that are set to [are not set to] eight bit mode.

 /NOEIGHT_BIT is the default. DEC software employs seven bit ASCII
 (without parity checking).

 /EIGHT_BIT allows the terminal to pass all eight bits of the ASCII
 characters. This attribute is used when a teminal is communicating with
 some device that sends eight-bit ASCII.

 The mnemonic EBC, used in the output, means Eight Bit Character.
3 NOESCAPE

 SHOW TERMINAL/ESCAPE
 SHOW TERMINAL/NOESCAPE

 The SHOW TERMINAL/[NO]ESCAPE command lists the terminals in the system
 that are set to [are set not to] recognize terminal escape sequences.
3 NOFORM_FEED

 SHOW TERMINAL/FORM_FEED
 SHOW TERMINAL/NOFORM_FEED

 The SHOW TERMINAL/[NO]FORM_FEED command lists the terminals in the
 system that do [do not] support hardware form feeds.
3 NOHARDCOPY
#SCOPE
3 NOHOLD_SCREEN

 SHOW TERMINAL/HOLD_SCREEN
 SHOW TERMINAL/NOHOLD_SCREEN

 The SHOW TERMINAL/[NO]HOLD_SCREEN command lists the terminal in the
 system that are [are not] in hold-screen mode. Hold-screen mode is a
 mode supported by some CRT terminals in which text is presented one
 page at a time.
3 NOINTERACTIVE
#PASSALL
3 NOLOCAL
#REMOTE
3 NOLOWER_CASE
#UPPER_CASE
3 NOPASSALL
#PASSALL
3 NOPRIVILEGE
#PRIVILEGE
3 NOREMOTE
#REMOTE
3 NOSCOPE
#SCOPE
3 NOSLAVE
#SLAVE
3 NOTAB
#TAB
3 NOTYPE_AHEAD
#TYPE_AHEAD
3 NOUPPERCASE
#UPPERCASE
3 NOVFILL
#VFILL
3 NOWRAP
#WRAP
3 PAGE

 SHOW TERMINAL[:ddnn:]/PAGE

 The SHOW TERMINAL/PAGE command shows the number of lines per page on
 your terminal. A privileged user can show the page length of any termi-
 nal in the system.

 The page length on a CRT terminal is usually considered to be the num-
 ber of lines on the screen.
3 RPA
#PASSALL
3 PASSALL

 SHOW TERMINAL/PASSALL
 SHOW TERMINAL/NOINTERACTIVE

 SHOW TERMINAL/NOPASSALL
 SHOW TERMINAL/INTERACTIVE

 The above commands list the terminals in the system that are [are not]
 in read-pass-all mode.

 /NOPASSALL is the default and means that any characters typed on the
 terminal are interpreted by the terminal driver.

 /PASSALL means that characters typed on the terminal are pass directly
 to the requesting task without interpretation by the terminal driver.

 The mnemonic RPA, used in the display, means Read Pass All.
3 PRIVILEGED

 SHOW TERMINAL/PRIVILEGED

 The SHOW TERMINAL PRIVILEGED command lists all of the privileged ter-
 minals in the system. A privileged terminal can issue any DCL or MCR
 command.
3 REMOTE

 SHOW TERMINAL/LOCAL
 SHOW TERMINAL/NOREMOTE

 SHOW TERMINAL/NOLOCAL
 SHOW TERMINAL/REMOTE

 The above commands list the terminals in the system that are [are not]
 on remote (dial-up) lines.
3 SCOPE

 SHOW TERMINAL/HARDCOPY
 SHOW TERMINAL/NOSCOPE

 SHOW TERMINAL/NOHARDCOPY
 SHOW TERMINAL/SCOPE

 The above commands list the terminals in the system that are [are not]
 hardcopy terminals.
3 SLAVE

 SHOW TERMINAL/SLAVE
 SHOW TERMINAL/NOSLAVE

 The SHOW TERMINAL/[NO]SLAVE command lists the terminals in the system
 that are [are not] slaved. A slaved terminal is one that can not issue
 any unsolicited input. In general, this means that a slave terminal may
 not issue any DCL or MCR commands. A terminal is usually slaved while
 running a task so that the terminal can be left unattended without any
 fear of it being used to gain access to the system.
3 SPEED

 SHOW TERMINAL[:ddnn:]/SPEED

 The SHOW TERMINAL SPEED command lists the transmit and receive speeds
 of your terminal. A privileged use can show the transmit and receive
 speeds of any terminal in the system.

 The first of the two numbers displayed is the terminal's transmit
 speed. The second is its receive speed. Normally, both of these will be
 the same speed, but RSX-11M-PLUS supports split speed terminals (ter-
 minals with different transmit and receive speeds).  The SPEED setting 
 must match the speed set on the hardware switches on the terminal 
 itself.
3 HHT
#TAB
3 TAB

 SHOW TERMINAL/TAB
 SHOW TERMINAL/NOTAB

 The SHOW TERMINAL [NO]TAB command lists the terminal in the system that
 do [do not] support hardware horizontal tabs. If your terminal does not
 support these, the terminal driver replaces tabs with the appropriate
 number of spaces.

 The mnemonic HHT, used in the display, means Hardware Horizontal Tab.
3 TASK_SETUP

 SHOW TERMINAL attribute

 The following keywords show terminal characteristics that can be needed
 by system or user tasks. Most system tasks that require these attri-
 butes will set the attributes when they attach the terminal. User tasks
 can also do this. For more information on a particular attribute, type
 HELP SHOW TERMINAL attribute.

	/ECHO		/PASSALL
	/EIGHT_BIT	/REMOTE
	/ESCAPE		/SLAVE
	/FULL_DUPLEX	/TYPE_AHEAD
	/INTERACTIVE	/WRAP
	/LOCAL
3 TERMINAL_SETUP

 SHOW TERMINAL attribute

 The following keywords relate to hardware characteristics of a ter-
 minal. Most of these keywords will cause a list of all terminals in the
 system with the specified characteristic to be displayed. However, the
 attributes CRFILL,MODEL, PAGE, and LFFILL will display the value relating
 to your terminal.

 /ASR33	/KSR33	/ASR35	/LA12	/LA30S	/LA30P	/LA34	/LA38	/LA100

 /LA120	/LA180S	/VT05	/VT50	/VT52	/VT55	/VT61	/VT100	/VT101
 
 /VT102	/VT105	/VT125	/VT131	/VT132

 /FORM_FEED	/PAGE	/HARDCOPY	/SCOPE		/TAB	

 /MODEL		/LFFILL /HFILL
3 TYPE_AHEAD

 SHOW TERMINAL/TYPE_AHEAD
 SHOW TERMINAL/NOTYPE_AHEAD

 The SHOW TERMINAL/[NO]TYPE_AHEAD command lists the terminals in the system
 that do [do not] have their typeahead buffers enabled. The typeahead
 buffer is 36 characters long and holds characters typed when they are
 typed faster than they are accepted as input.
3 UPPER_CASE

 SHOW TERMINAL/LOWERCASE
 SHOW TERMINAL/NOUPPERCASE

 SHOW TERMINAL/NOLOWERCASE
 SHOW TERMINAL/UPPERCASE

 The above commands list the terminals in the system which do [do not]
 support lowercase. On terminals which do not have this attribute set,
 lowercase characters are converted to upper case before they are sent
 to the terminal.
3 VFILL
#LFFILL
3 LFFILL

 SHOW TERMINAL/LFFILL
 SHOW TERMINAL/NOLFFILL

 The SHOW TERMINAL/[NO]LFFILL command lists the terminals in the system
 which do [do not] require vertical fill characters. Vertical fill
 characters are used to accomodate terminals which cannot accept new
 data characters immediately after performing a vertical tab, line feed,
 or form feed. /VFILL is a synonym.
3 ASR33
#VT61
3 KSR33
#VT61
3 ASR35
#VT61
3 LA12
#VT61
3 LA30S
#VT61
3 LA30P
#VT61
3 LA34
#VT61
3 LA38
#VT61
3 LA100
#VT61
3 LA120
#VT61
3 LA180S
#VT61
3 VT05
#VT61
3 VT50
#VT61
3 VT52
#VT61
3 VT55
#VT61
3 VT100
#VT61
3 VT101
#VT61
3 VT102
#VT61
3 VT105
#VT61
3 VT125
#VT61
3 VT131
#VT61
3 VT132
#VT61
3 VT61
 SHOW TERMINAL[:ddnn:]/terminalmodel

 The SHOW TERMINAL/terminalmodel command displays a list of all terminals
 on your system of a particular model.

 /terminalmodel can be any of the following:

 /ASR33	/KSR33	/ASR35	/LA12	/LA30S	/LA30P	/LA34	/LA38	/LA100

 /LA120	/LA180S	/VT05	/VT50	/VT52	/VT55	/VT61	/VT100	/VT101
 
 /VT102	/VT105	/VT125	/VT131	/VT132

 Certain system tasks, and possibly some user tasks, make use of this
 terminal model information, and therefore it is a good idea to make
 sure that this information is correct.

3 WRAP

 SHOW TERMINAL/WRAP
 SHOW TERMINAL/NOWRAP

 The SHOW TERMINAL [NO]WRAP command lists the terminals in the system
 which are set to [set not to] wrap around at the end of line. If the
 terminal is set to wrap, the terminal driver issues a carriage-return/
 line-feed pair when you type up to whatever line width the terminal is
 set for. If wrap is not set, no carriage-return/line-feed pair is
 issued.
2 TIME

 SHOW DAYTIME
 SHOW TIME

 The SHOW TIME command displays the current time and date. The time is
 in 24-hour format and the date is formatted as dd-mmm-yy.
2 USERS

 SHOW USERS

 The SHOW USERS command lists the currently logged in real and virtual
 terminals. Also displayed are the default and login UICs. 

 ON RSX-11M-PLUS systems, if accounting is supported and is running, 
 subsequent columns of the display show the date and time of login, 
 the number of tasks active on the terminal, and the name of the person 
 logged in.
