 PRINT/commandqualifier[s] file[s]/filequalifier[s]
 
 The PRINT command submits one or more files for printing. The files are
 grouped together into a single QMG print job and will all be printed
 together.  Abbreviation: P
 
 
 The following command qualifiers are available:
 
 /AFTER:(dd-mmm-yy  hh:mm)     	/[NO]HOLD			/PAGE_COUNT:n
 /JOB_COUNT:n			/[NO]JOB_PAGE			/PRIORITY:n
 /[NO]FLAG_PAGE			/LENGTH:n         		/[NO]RESTART
 /FORMS:n		        /LOWERCASE                      /UPPERCASE
 /NAME:jobname			/QUEUE:queuename		/DEVICE:ddnn:
 /[NO]TRANSFER

 The following file qualifiers are available:
 
 /COPIES:n			/[NO]DELETE 		/[NO]TRANSFER
2 NOTRANSFER
#TRANSFER
2 TRANSFER

 PRINT/[NO]TRANSFER files

 The /NOTRANSFER qualifier inhibits the copying of the file to LB: for 
 spooling.  The default is /TRANSFER.  This can be a command qualifier
 or a file qualifier.
2 DEVICE

 PRINT/DEVICE:ddnn: files

 The /DEVICE qualifier specifies the device on which you want your 
 output to appear.  The default is the device or devices served by the
 PRINT queue.
2 QUEUE
 PRINT/QUEUE:queuename files

 The /QUEUE qualifier specifies the name of the print queue in which 
 the job is to be placed.  The default queue is PRINT.
2 NAME

 PRINT/NAME:jobname files

 The /NAME qualifier permits you to give a name of from 1 through 9 
 Radix-50 characters to your QMG print job.  The default is to name
 the job after the first file name in the job.

2 AFTER
 
 PRINT/AFTER:(dd-mmm-yy hh:mm) files
 
 The /AFTER qualifier allows you to specify that your job should
 be delayed until after a specified date and time. The job will not print
 immediately at that time, but will become eligible to be printed, and will
 compete with other jobs at that time.
 
 You may specify either the date, or the time, or both. If you do not
 specify a date, the current date is assumed.  To specify the date
 without the time, omit the hh and mm values, but still include the
 colons.
 
 
 Examples:
 
 PRINT/AFTER:(18:00) LONGFILE.TXT	! print the file after 6 pm
 
 PRINT/AFTER:(1-APR-82) JOKE.TXT	! print the file on April 1, 1982
 
2 JOBCOUNT
 
 PRINT/JOB_COUNT:n files
 
 The command qualifier /JOB_COUNT specifies how many copies of the complete job
 are to be printed. In the example below, two copies of the job are
 printed. Each one consists of one copy of FILE1.TXT followed by one
 copy of FILE2.TXT.
 
 Example:
 
 PRINT/JOB_COUNT:2 FILE1.TXT, FILE2.TXT
 
2 COPIES
 
 The file qualifier /COPIES specifies how many copies of the file are 
 to be printed. Only one copy of the job is printed, but it contains two 
 copies of FILE1.TXT followed by two copies of FILE2.TXT.
 
 Example:
 
 PRINT FILE1.TXT, FILE2.TXT/COPIES:2
2 DELETE
 
 PRINT files/[NO]DELETE
 PRINT/[NO]DELETE files

 The /DELETE qualifier specifies that one or more files are
 to be deleted after printing. The default is /NODELETE.
 
 As a filespec qualifier, /DELETE indicates that that file is to be deleted.
 As a command qualifier, /DELETE indicates that all files named in the 
 command are to be deleted.  Use the filespec qualifier to override the command
 qualifier.
 
 Examples:
 
 PRINT FILE1.TXT,FILE2.TXT/DE,FILE3.TXT 	!Delete FILE2.TXT only
 PRINT/DELETE FILE1.TXT,FILE2.TXT,FILE3.TXT	!Delete all files
 PRINT/DELE FILE1.TXT,FILE2.TXT/NODEL,FILE3.TXT !Delete all but FILE2.TXT
2 FLAG_PAGE
 
 PRINT/[NO]FLAG_PAGE files
 
 The /FLAG_PAGE qualifier specifies whether or not files in a job 
 should be preceeded by file flag pages. The file flag pages separate 
 files and show the file.  The default is /NOFLAG_PAGE.
 
2 FORMS
 
 PRINT /FORMS:n files
 
 The /FORMS qualifier specifies that your job is to be printed on a special 
 form. Your installation may have different forms for different tasks, such
 as normal computer paper, narrow white paper for letters, check forms, etc.
 
 The default form number is /FORMS:0.
 
 See your system manager to find out what other forms are available at your
 installation
2 HOLD
 
 PRINT/[NO]HOLD files
 
 The /HOLD qualifier specifies that your job is to be held (made ineligible for
 printing). You must then release the job to allow it to be printed.
 
 See HELP RELEASE/JOB
2 JOBPAGES
 
 PRINT/[NO]JOB_PAGE files
 
 The /JOB_PAGE qualifier specifies whether or not your job should be 
 preceded by job flag pages. The default is /JOB_PAGE.
 
 If you specify /NOJOB_PAGE, your job will still start on a new page, 
 but job flag pages will not be printed. You might do this if you were 
 printing on a special form, particularly a short one.
2 LENGTH
 
 PRINT/LENGTH:n files
 
 The /LENGTH qualifier specifies how many lines should be printed on 
 a physical printer page. If, within 'n' lines, a formfeed has not 
 been printed, the despooler will insert one. In this way, you can limit 
 the amount of text on a page.
 
 This is particularly useful if you are going to place the output in a listing
 binder. By using the /LENGTH qualifier you can prevent the despooler from 
 printing over a perforation, which will be difficult to read when bound.
 For instance, /LENGTH:60 works on 66-line line printers.
 
 The default, /LENGTH:0, specifies that no implied form feeds should be 
 inserted.
 
2 LOWERCASE
 
 PRINT/LOWERCASE files
 
 The /LOWERCASE qualifier specifies that your job must be printed on a printer
 that has been initialized with lowercase characters.
 
 Notice that /LOWERCASE does not effect a lower to upper translation. 
 It is just a selection criteria used to select a printer.
 
2 PAGECOUNT
 
 PRINT/PAGE_COUNT:n files
 
 /PAGE_COUNT allows you to specify a limit on the number of pages of output
 your job will produce. If the specified number of pages is exceeded, an error
 message is output and the the job is deleted.
 
 The default is /PAGE_COUNT:0, which specifies no page limit.
2 PRIORITY
 
 PRINT/PRIORITY:n files
 
 /PRIORITY allows you to specify a priority for your print job. This
 priority has no effect on how quickly the job is printed once it is started,
 but is simply used to determine position in the queue.
 
 Privileged users may specify any priority between 1 and 250. Non-privileged
 users may only specify priorities between 1 and 150.
 
 The default is /PRIORITY:50. /PRIORITY:0 is the same as /PRIORITY:50.
2 RESTART
 
 PRINT/[NO]RESTART files
 
 /RESTART specifies whether or not your job is to be restarted from the
 beginning if it is interrupted.
 
 If you specify /RESTART, if your job is stopped for some reason, and then 
 started, it will start over again from the beginning.
 
 If you specify /NORESTART, the default, if your job is stopped for some 
 reason, and then started, it will continue from where it left off.
2 UPPERCASE
 
 PRINT/UPPERCASE files
 
 /UPPERCASE specifies that the print job can be sent to a 
 line printer that need not have been initialized lowercase.
 This is the default.

