
  AVD is used to assign a Virtual Disk.  It is used as follows:

		AVD VDn:=filespec[/sw]

		VDn:		virtual disk to assign
		filespec	file to be used as virtual disk
				(extension defaults to .DSK)
		/sw		switches - one of the following:

				/CR:n	create file with "n" blocks
				/RX	create file with 494. blocks (RX01)
				/DX	same as /RX
				/RK	create file with 4800. blocks (RK05)
				/RO	allow only read access
				/LI	list out filespec of this unit
				/ID	report AVD program version number
				/PL:n	create file at logical block "n"

 AVD will perform the specified command or print an error message.

 Help is available on the topic of virtual disks by typing HELP VIRTUAL_DISKS
