THE SYE ERROR LOG DISPLAY PROGRAM HAS THE COMMAND FORMAT:

	SYE>OUTFILE/SW1/SWN = INFILE
	
	WHERE:
		OUTFILE DEFAULTS TO  ERRLOG.LST
		INFILE DEFAULTS TO  SY:[1,6]ERROR.SYS
		NO SWITCHES DEFAULTS TO A SUMMARY REPORT OF ERRORS
		THE DEFAULT IS TO SPOOL ALL OUTPUT FILES


REPORT OP-
TION SWITCH    DESCRIPTION
   
/RP[:CLASS]    THE /RP SWITCH REQUESTS INDIVIDUAL ERROR REPORTS;THE CLASS 
               PARAMETER IS USED TO SPECIFY A GENERAL CLASSIFICATION OF ERRORS 
               TO BE REPORTED.  CLASS HAS ONE OF THE FOLLOWING VALUES:
   
                NULL    ALL CLASSES
   
                SYS     SYSTEM ENTRIES-  THIS PARAMETER TAKES THE FORM:
                        /RP:SYS[:TYPE]
                    WHERE
                     TYPE IS ONE OF THE FOLLOWING:
                         NULL    ALL TYPES OF SYSTEM ENTRIES
                         PSE     ENTRIES FROM PSE OPERATION
                         STA     ERROR LOGGING START UP
                         STO     ERROR LOGING SHUT DOWN
                         MOU     DEVICE MOUNTS AND DISMOUNTS
                         TIM     SYSTEM TIME CHANGES
                         CFG     CONFIGURATION RELEVANT INFORMATION
   
                HDW     HARDWARE ERRORS.  WHEN CLASS IS HDW, AN ADDITIONAL
                        PARAMETER CAN BE SPECIFIED FURTHER DEFINING THE ERRORS
                        TO BE REPORTED.  THIS PARAMETER TAKES THE FORM:
                    
                          /RP:HDW[:TYPE]
                       WHERE
                          TYPE IS ONE OF THE FOLLOWING:
                         NULL    ALL TYPES OF HARDWARE ERRORS
                         DSK     ALL DISK ERRORS
                         MAG     ALL MAGNETIC TAPE AND DECTAPE ERRORS
                         MEM     ALL CACHE AND MAIN MEMORY PARITY ERRORS
  
                TMO     INTERRUPT TIME-OUT ERRORS FROM DISKS AND MAGNETIC TAPES.
                         /RP:SYS:DSK      FOR ONLY DISK INFORMATION
                         /RP:SYS:MAG      FOR ONLY MAGNETIC TAPE INFORMATION
   
                VEC     UNIDENTIFIED INTERRUPTS
   
  
/-RP  OR /NORP   DO NOT INCLUDE INDIVIDUAL ERROR REPORTS.  SYE PRODUCES A
                 SUMMARY REPORT ONLY. /-RP IS THE DEFAULT.
   
/DV:DEV[N]       INCLUDE IN THE REPORT ONLY THOSE ERRORS THAT OCCURRED ON 
                 A SPECIFIED DEVICE TYPE OR ON A SPECIFIED DEVICE UNIT.
    
/BEG:TIME-AND-DATE
                 INCLUDE IN THE REPORT ONLY ERRORS LOGGED AFTER THE SPECIFIED
                 TIME AND DATE.  THE FORMAT OF THE TIME-AND-DATE PARAMETER IS:
                
                          DD-MON-YR:HR:MI:SE
             FOR EXAMPLE: 25-NOV-78:24:30:0
   
/END:TIME-AND-DATE
                 INCLUDE IN THE REPORT ONLY THOSE ERRORS LOGGED PRIOR TO THE
                 SPECIFIED TIME AND DATE.  THE FORMAT IS THE SAME AS FOR /BEG.
   
/HELP            THE /HELP SWITCH CAUSES SYE TO DISPLAY SYE OPERATING INS-
                 TRUCTIONS.  TO OBTAIN THIS INFORMATION, THE USER SPECIFIES
                 THE /HELP SWITCH IN RESPONSE TO THE SYE PROMPT AS FOLLOWS:
                       SYE>/HELP  <CR>
   
/SP              SPOOL OUTPUT FILE.  THIS IS THE DEFAULT.
  
	EXAMPLE #1 PRINT A SUMMARY REPORT OF ALL ERRORS
  
		SYE> <CR>

	EXAMPLE #2 PRINT A FULL REPORT OF ALL ENTRIES

		SYE> /RP
  
	EXAMPLE #3 PRINT A FULL REPORT OF ALL ERRORS ON DB0

		SYE> /DV:DB0

        EXAMPLE #4   PRINT A REPORT ON ALL SYSTEM TIME CHANGES
                     USING [1,6]ERRSAV.SYS AS INPUT FILE.
   
       SYE>/RP:SYS:TIM=[1,6]ERRSAV.SYS
  
	ALSO REFER TO THE RSX11M ERROR LOGGING MANUAL OR TYPE HELP ERRLOG.

